main
Ray
Publish 0.1.0
70addeb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366
{
"slug": "nau88l21yg",
"version": "0.1.0",
"type": "component",
"description": "Nuvoton Tech Audio Power OpAmps, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"operational amplifier-comparator",
"nau88l21yg",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"nau88l21yg.kicad_sym",
"nau88l21yg.kicad_mod",
"nau88l21yg.glb",
"nau88l21yg.step",
"nau88l21yg.lbr",
"docs/hero.png",
"docs/nau88l21yg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"nau88l21yg-hero.glb",
"nau88l21yg-hero.overlay.json",
"nau88l21yg-etched.glb"
],
"component": {
"mpn": "NAU88L21YG",
"manufacturer": "Nuvoton Tech",
"package": "QFN-32-EP(5x5)",
"pin_count": 33,
"category": "Operational Amplifier/Comparator",
"subcategory": "Audio Power OpAmps",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/116ea9d2825679f366b8ca5d5dce3762.pdf",
"parts": {
"symbol": "nau88l21yg.kicad_sym",
"footprint": "nau88l21yg.kicad_mod",
"model_3d": "nau88l21yg-hero.glb",
"model_3d_plain": "nau88l21yg-etched.glb",
"model_3d_step": "nau88l21yg-etched.step",
"model_3d_step_plain": "nau88l21yg.step",
"lbr": "nau88l21yg.lbr"
},
"distributor_links": {
"lcsc": "C2917201",
"digikey": "816-NAU88L21YG-ND",
"mouser": "503-NAU88L21YG"
},
"distributor_check": {
"checked_at": "2026-11-11T06:47:00Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "816-NAU88L21YG-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "503-NAU88L21YG",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "MICDET",
"type": "bidirectional",
"description": "Microphone/button detect pin; a 2 kOhm resistor (internal or external) connects the microphone between MICBIAS and this pin."
},
{
"number": "2",
"name": "MICBIAS",
"type": "output",
"description": "Microphone bias output whose level is set by register between VDDA and 1.53 x VDDA; microphones should not draw more than 4 mA from this pin."
},
{
"number": "3",
"name": "VDDMIC",
"type": "power_in",
"description": "Microphone bias supply, recommended 3.0 V to 3.6 V (3.3 V typical)."
},
{
"number": "4",
"name": "VREF",
"type": "power_in",
"description": "Internal DAC and ADC mid-supply reference (about VDDA/2) decoupling pin; a 4.7 µF capacitor to VSSA is typically used."
},
{
"number": "5",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground; must be tied together with VSSD."
},
{
"number": "6",
"name": "VDDA",
"type": "power_in",
"description": "Analog supply, recommended 1.62 V to 1.98 V (1.8 V typical); must be tied together with VDDC."
},
{
"number": "7",
"name": "CPOUTP",
"type": "bidirectional",
"description": "Charge pump positive output voltage (about +VDDA unloaded), decoupled to VSSCP with about 2 µF ceramic."
},
{
"number": "8",
"name": "VSSCP",
"type": "power_in",
"description": "Charge pump ground, used for the CPOUTP and CPOUTN decoupling capacitors."
},
{
"number": "9",
"name": "CPOUTN",
"type": "bidirectional",
"description": "Charge pump negative output voltage (about -VDDA unloaded), decoupled to VSSCP with about 2 µF ceramic."
},
{
"number": "10",
"name": "CPCB",
"type": "bidirectional",
"description": "Charge pump flying capacitor node B; the fly-back capacitor connects between CPCA and CPCB."
},
{
"number": "11",
"name": "CPCA",
"type": "bidirectional",
"description": "Charge pump flying capacitor node A; the fly-back capacitor connects between CPCA and CPCB."
},
{
"number": "12",
"name": "JKTIP(HPL)",
"type": "output",
"description": "Left-channel ground-referenced Class G headphone output (jack tip); can also be used as a lineout."
},
{
"number": "13",
"name": "JKR1(HPR)",
"type": "output",
"description": "Right-channel ground-referenced Class G headphone output (jack ring 1); can also be used as a lineout."
},
{
"number": "14",
"name": "HPFB",
"type": "power_in",
"description": "Headphone ground reference for the ground-referenced headphone outputs (listed as type Ground in the source table)."
},
{
"number": "15",
"name": "IRQ",
"type": "bidirectional",
"description": "Interrupt request pin; active low by default and configurable to active high, with pull and drive options set by register."
},
{
"number": "16",
"name": "GPIO1/CSB",
"type": "bidirectional",
"description": "General purpose I/O / chip select; pulling it low selects I2C device address 0x1B and pulling it high selects 0x54."
},
{
"number": "17",
"name": "SDIO",
"type": "bidirectional",
"description": "I2C serial data line for control register access (NAU88L21 acts as slave only)."
},
{
"number": "18",
"name": "SCLK",
"type": "input",
"description": "I2C serial data clock input for control register access."
},
{
"number": "19",
"name": "VDDB",
"type": "power_in",
"description": "Digital I/O supply, recommended 1.62 V to 3.6 V."
},
{
"number": "20",
"name": "VSSD",
"type": "power_in",
"description": "Digital I/O ground; must be tied together with VSSA."
},
{
"number": "21",
"name": "VDDC",
"type": "power_in",
"description": "Digital core supply; must be tied together with VDDA."
},
{
"number": "22",
"name": "MCLK",
"type": "input",
"description": "Codec master clock input; the internal MCLK should be 256 x Fs (for example 12.288 MHz at 48 kHz) for best performance."
},
{
"number": "23",
"name": "BCLK",
"type": "bidirectional",
"description": "Serial data bit clock input (slave) or output (master) for I2S or PCM audio data."
},
{
"number": "24",
"name": "FS",
"type": "bidirectional",
"description": "Frame sync input (slave) or output (master) for I2S or PCM audio data."
},
{
"number": "25",
"name": "DACIN",
"type": "input",
"description": "Serial audio data input to the DACs for I2S or PCM data."
},
{
"number": "26",
"name": "ADCOUT",
"type": "output",
"description": "Serial audio data output from the ADCs for I2S or PCM data."
},
{
"number": "27",
"name": "JKDET/GPIO2",
"type": "input",
"description": "Jack detect input supplied by VDDA (also usable as GPIO2 per register configuration)."
},
{
"number": "28",
"name": "MICR+",
"type": "input",
"description": "PGA MICR+ analog input, AC-coupled, with a fixed 12 kOhm input impedance."
},
{
"number": "29",
"name": "MICR-/DMCLK",
"type": "output",
"description": "PGA MICR- analog input, or digital microphone clock output (DMICCLK) when digital microphone mode is used."
},
{
"number": "30",
"name": "MICL-/DMDATA",
"type": "input",
"description": "PGA MICL- analog input, or digital microphone data input (DMICDATA) when digital microphone mode is used."
},
{
"number": "31",
"name": "MICL+",
"type": "input",
"description": "PGA MICL+ analog input, AC-coupled, with a fixed 12 kOhm input impedance."
},
{
"number": "32",
"name": "VDDA",
"type": "power_in",
"description": "Analog supply listed a second time in the pin table; treat as analog supply, recommended 1.62 V to 1.98 V."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin description table lists VDDA on both pin 6 and pin 32. The pin diagram does not clearly conf; Pin names differ between the page 6 pin diagram (HPL/HPR, DMICCLK, DMDATA) and the page 7 pin table ; The source table types HPFB as Ground. It is mapped to power_in as the ground class; it is a headpho",
"exposed pad 33 added from the footprint"
],
"pages_sent": 80,
"cost_usd": 0.3258,
"at": "2026-11-11T06:46:47"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/116ea9d2825679f366b8ca5d5dce3762.pdf",
"pages": 80,
"sha256": "cea58f259542512b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "nau88l21yg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "nau88l21yg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5aab9adf08826377fc119e7e70c7eacb73db2b2d4b19c2b66f6a4b91609f94cb",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "QFN-32",
"source_page": 74,
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "nau88l21yg.step",
"verdict": "SKIP",
"reasons": [
"the datasheet dimensions give no height or body size to compare"
],
"by": "factory/package_fit.py"
}
}
}
}