main
Ray Publish 0.1.0 6174ffb
{
  "slug": "nau8810yg",
  "version": "0.1.0",
  "type": "component",
  "description": "Nuvoton Tech Audio Interface ICs, QFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "nau8810yg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nau8810yg.kicad_sym",
    "nau8810yg.kicad_mod",
    "nau8810yg.glb",
    "nau8810yg.step",
    "nau8810yg.lbr",
    "docs/hero.png",
    "docs/nau8810yg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nau8810yg-hero.glb",
    "nau8810yg-hero.overlay.json",
    "nau8810yg-etched.glb"
  ],
  "component": {
    "mpn": "NAU8810YG",
    "manufacturer": "Nuvoton Tech",
    "package": "QFN-20(4x4)",
    "pin_count": 21,
    "category": "Interface ICs",
    "subcategory": "Audio Interface ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b395da4c018e3053761698fbca3b4f7a.pdf",
    "parts": {
      "symbol": "nau8810yg.kicad_sym",
      "footprint": "nau8810yg.kicad_mod",
      "model_3d": "nau8810yg-hero.glb",
      "model_3d_plain": "nau8810yg-etched.glb",
      "model_3d_step": "nau8810yg-etched.step",
      "model_3d_step_plain": "nau8810yg.step",
      "lbr": "nau8810yg.lbr"
    },
    "distributor_links": {
      "lcsc": "C2613464",
      "digikey": "NAU8810YG-ND",
      "mouser": "503-NAU8810YG"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T06:43:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NAU8810YG-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "503-NAU8810YG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MICBIAS",
        "type": "power_out",
        "description": "Low-noise microphone bias output that supplies up to 3 mA of bias current through an internal ~200 Ω series resistor and needs an external filter capacitor."
      },
      {
        "number": "2",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply, specified 2.50 V to 3.60 V, and must be at least equal to VDDD."
      },
      {
        "number": "3",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground; the bulk ground pad on the underside of the package should be thermally tied to the PCB and electrically tied to analog ground."
      },
      {
        "number": "4",
        "name": "VDDD",
        "type": "power_in",
        "description": "Digital core and I/O supply, specified 1.71 V to 3.60 V."
      },
      {
        "number": "5",
        "name": "VSSD",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "6",
        "name": "ADCOUT",
        "type": "output",
        "description": "Digital audio data output from the ADC that defaults to pulled low and can be configured as Hi-Z, pull-low or pull-high."
      },
      {
        "number": "7",
        "name": "DACIN",
        "type": "input",
        "description": "Digital audio data input to the DAC; the external DAC data is ignored when digital ADC-to-DAC pass-through is enabled."
      },
      {
        "number": "8",
        "name": "FS",
        "type": "bidirectional",
        "description": "Frame sync for the digital audio interface, an input in slave mode and an output at IMCLK/256 in master mode."
      },
      {
        "number": "9",
        "name": "BCLK",
        "type": "bidirectional",
        "description": "Bit clock for the digital audio interface, an input in slave mode and generated internally in master mode."
      },
      {
        "number": "10",
        "name": "MCLK",
        "type": "input",
        "description": "Master clock input to the PLL and master clock prescaler, with minimum high and low pulse widths of 20 ns and a 60:40 to 40:60 duty cycle."
      },
      {
        "number": "11",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input of the 2-wire (I2C-style) control interface."
      },
      {
        "number": "12",
        "name": "SDIO",
        "type": "bidirectional",
        "description": "Bidirectional serial data line of the 2-wire (I2C-style) control interface, which the device acknowledges with a LOW pull on the ninth clock."
      },
      {
        "number": "13",
        "name": "MOUT",
        "type": "output",
        "description": "Mono output that drives 16 Ω or 32 Ω headphone loads or a line output, with a 1.5 VRMS drive capability when powered from VDDSPK."
      },
      {
        "number": "14",
        "name": "SPKOUT+",
        "type": "output",
        "description": "Positive terminal of the differential BTL speaker output, designed to drive an 8 Ω speaker and powered by VDDSPK."
      },
      {
        "number": "15",
        "name": "VSSSPK",
        "type": "power_in",
        "description": "Speaker output stage ground."
      },
      {
        "number": "16",
        "name": "SPKOUT-",
        "type": "output",
        "description": "Negative terminal of the differential BTL speaker output, designed to drive an 8 Ω speaker and powered by VDDSPK."
      },
      {
        "number": "17",
        "name": "VDDSPK",
        "type": "power_in",
        "description": "Speaker output stage supply, specified 2.50 V to 3.60 V, or 2.50 V to 5.50 V when the boost mode is enabled."
      },
      {
        "number": "18",
        "name": "VREF",
        "type": "power_out",
        "description": "Internal analog mid-supply reference that must be decoupled externally, held at approximately half of VDDA."
      },
      {
        "number": "19",
        "name": "MIC-",
        "type": "input",
        "description": "Negative microphone input to the PGA, usable as a differential partner of MIC+ or as a single-ended input, with PGA gain from -12 dB to +35.25 dB."
      },
      {
        "number": "20",
        "name": "MIC+",
        "type": "input",
        "description": "Positive microphone input to the PGA, with PGA gain from -12 dB to +35.25 dB and a nominal non-inverting input resistance of 94 kΩ, that should be AC-coupled."
      },
      {
        "number": "21",
        "name": "VSSA",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Ordering table lists the part as NAU88U10YG (Y = 20-Pin QFN), not the exact MPN NAU8810YG. The datas; The QFN-20 (4x4) body size is not stated in the extracted text; the package-specification page (99) ; The pin description table header says '24-Pin Functionality' but lists 20 pins numbered 1-20; the 20",
          "exposed pad 21 added from the footprint",
          "3/21 pins cited to the wrong page (name found elsewhere): ['6:ADCOUT@p47', '13:MOUT@p36', '14:SPKOUT+@p36']"
        ],
        "pages_sent": 102,
        "cost_usd": 0.3386,
        "at": "2026-11-11T06:43:34"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/b395da4c018e3053761698fbca3b4f7a.pdf",
        "pages": 102,
        "sha256": "b7f0c121787aab9c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nau8810yg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nau8810yg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "345790b3a4dce7cec34d774baf7e7a323e7771171a0113109e48e2ed5a2977d2",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}