Generated by kicad-footprint-generator · KiCad file format 20260206
NAU8810YG
Nuvoton Tech · Audio Interface ICs · QFN-20(4x4)
NAU8810YG from Nuvoton Tech, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MICBIAS | power_out | Low-noise microphone bias output that supplies up to 3 mA of bias current through an internal ~200 Ω series resistor and needs an external filter capacitor. |
| 2 | VDDA | power_in | Analog supply, specified 2.50 V to 3.60 V, and must be at least equal to VDDD. |
| 3 | VSSA | power_in | Analog ground; the bulk ground pad on the underside of the package should be thermally tied to the PCB and electrically tied to analog ground. |
| 4 | VDDD | power_in | Digital core and I/O supply, specified 1.71 V to 3.60 V. |
| 5 | VSSD | power_in | Digital ground. |
| 6 | ADCOUT | output | Digital audio data output from the ADC that defaults to pulled low and can be configured as Hi-Z, pull-low or pull-high. |
| 7 | DACIN | input | Digital audio data input to the DAC; the external DAC data is ignored when digital ADC-to-DAC pass-through is enabled. |
| 8 | FS | bidirectional | Frame sync for the digital audio interface, an input in slave mode and an output at IMCLK/256 in master mode. |
| 9 | BCLK | bidirectional | Bit clock for the digital audio interface, an input in slave mode and generated internally in master mode. |
| 10 | MCLK | input | Master clock input to the PLL and master clock prescaler, with minimum high and low pulse widths of 20 ns and a 60:40 to 40:60 duty cycle. |
| 11 | SCLK | input | Serial clock input of the 2-wire (I2C-style) control interface. |
| 12 | SDIO | bidirectional | Bidirectional serial data line of the 2-wire (I2C-style) control interface, which the device acknowledges with a LOW pull on the ninth clock. |
| 13 | MOUT | output | Mono output that drives 16 Ω or 32 Ω headphone loads or a line output, with a 1.5 VRMS drive capability when powered from VDDSPK. |
| 14 | SPKOUT+ | output | Positive terminal of the differential BTL speaker output, designed to drive an 8 Ω speaker and powered by VDDSPK. |
| 15 | VSSSPK | power_in | Speaker output stage ground. |
| 16 | SPKOUT- | output | Negative terminal of the differential BTL speaker output, designed to drive an 8 Ω speaker and powered by VDDSPK. |
| 17 | VDDSPK | power_in | Speaker output stage supply, specified 2.50 V to 3.60 V, or 2.50 V to 5.50 V when the boost mode is enabled. |
| 18 | VREF | power_out | Internal analog mid-supply reference that must be decoupled externally, held at approximately half of VDDA. |
| 19 | MIC- | input | Negative microphone input to the PGA, usable as a differential partner of MIC+ or as a single-ended input, with PGA gain from -12 dB to +35.25 dB. |
| 20 | MIC+ | input | Positive microphone input to the PGA, with PGA gain from -12 dB to +35.25 dB and a nominal non-inverting input resistance of 94 kΩ, that should be AC-coupled. |
| 21 | VSSA | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | QFN-20(4x4) |
| Category | Interface ICs |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDD, VDDA supply voltages | VDDD, VDDA | -0.3 | 3.63 | V | 12 | ||
| VDDSPK supply voltage | VDDSPK | -0.3 | 3.63 | V | MOUTBST=0, SPKBST=0 | 12 | |
| VDDSPK supply voltage | VDDSPK | -0.3 | 5.5 | V | MOUTBST=1, SPKBST=1 | 12 | |
| Industrial operating temperature | -40 | 85 | °C | 12 | |||
| Storage temperature range | -65 | 150 | °C | 12 | |||
| Analogue supplies range | VDDA | 2.5 | 3.6 | V | 12 | ||
| Digital supply range | VDDD | 1.71 | 3.6 | V | 12 | ||
| Speaker supply | VDDSPK | 2.5 | 3.6 | V | MOUTBST=0, SPKBST=0 | 12 | |
| Speaker supply | VDDSPK | 2.5 | 5.5 | V | MOUTBST=1, SPKBST=1 | 12 | |
| Signal to Noise Ratio (ADC) | SNR | 87 | 91 | dB | Gain = 0dB, A-weighted | 13 | |
| Total Harmonic Distortion (ADC) | THD | -79 | -65 | dB | Input = -1dBFS, Gain = 0dB | 13 | |
| Signal to Noise Ratio (DAC to MONO output) | SNR | 90 | 93 | dB | A-weighted (ADC/DAC oversampling rate of 128) | 13 | |
| Total Harmonic Distortion (DAC to MONO output) | THD | -84 | -70 | dB | RL = 10 KΩ; -1.0dBfs | 13 | |
| Programmable input PGA gain | -12 | 35.25 | dB | 13 | |||
| Speaker Output PGA Programmable Gain | -57 | 6 | dB | 13 | |||
| Target Record Level (ALC) | -28.5 | -6 | dB | 14 | |||
| Programmable Gain (ALC) | -12 | 35.25 | dB | 14 | |||
| ADC Pass band Ripple | -0.025 | 0.025 | dB | 96 | |||
| DAC Pass band Ripple | -0.035 | 0.035 | dB | 96 | |||
| BSCK Cycle Time | TBCK | 50 | ns | Slave Mode | 92 | ||
| BSCK High Pulse Width | TBCKH | 20 | ns | Slave Mode | 92 | ||
| BSCK Low Pulse Width | TBCKL | 20 | ns | Slave Mode | 92 | ||
| fs to SCK Rising Edge Setup Time | TFSS | 20 | ns | Slave Mode | 92 | ||
| SCK Rising Edge to fs Hold Time | TFSH | 20 | ns | Slave Mode | 92 | ||
| fs to SCK falling to fs transition | TFSD | 10 | ns | Master Mode | 92 | ||
| ADCIN to SCK Rising Edge Setup Time | TDIS | 15 | ns | 92 | |||
| SCK Rising Edge to ADCIN Hold Time | TDIH | 15 | ns | 92 | |||
| Delay Time from SCLK falling Edge to DACOUT | TDOD | 10 | ns | 92 | |||
| MCLK High Pulse Width | TMCLKH | 20 | ns | 92 | |||
| MCLK Low Pulse Width | TMCLKL | 20 | ns | 92 |
CAD (KiCad official)
- Symbol:
NAU8810YG - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
- 3D model files:
nau8810yg-etched.step/nau8810yg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nau8810yg.step/nau8810yg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (102 pp, sha256
b7f0c121787aab9c, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).