main
History Download
Ray Publish 0.1.0 63f9828

N79E814AS20

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-20-300mil

N79E814AS20 from Nuvoton Tech, in a SOP-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.0 bidirectional Port 0 bit 0, quasi-bidirectional after reset, multiplexed as PWM3 output, KB0 keyboard interrupt input and SPICLK (SPI-1 clock); Port 0 is configurable through P0M1/P0M2 and P0.0 is the PWM3 output when driven high for PWM.
2 P1.7 bidirectional Port 1 bit 7, quasi-bidirectional after reset, multiplexed as PWM2 output, ICPCLK (in-circuit programming serial clock), and MOSI (SPI-1); during ICP programming all pins are set to quasi-bidirectional with output high.
3 P1.6 bidirectional Port 1 bit 6, quasi-bidirectional after reset, multiplexed as PWM1 output, ICPDAT (in-circuit programming data I/O) and MISO (SPI-1).
4 RST input Active-low Schmitt-trigger reset input; the internal pull-up is about 200 kΩ so the pin must not be left floating, and the datasheet calls for a 100 Ω pull-up resistor and 10 µF capacitor to ground.
5 VSS power_in Ground reference for the device.
6 P3.1 bidirectional Port 3 bit 1, used as XTAL1 (input to the inverting amplifier of the external crystal/resonator oscillator); when an external crystal is used P3.1 cannot be used as an I/O pin.
7 P3.0 bidirectional Port 3 bit 0, used as XTAL2 (output of the internal oscillator amplifier) or as CLKOUT, which outputs the internal RC clock divided by 4 when ENCLK is set; it cannot be used as I/O when an external crystal is used.
8 P1.4 bidirectional Port 1 bit 4, quasi-bidirectional, multiplexed as external interrupt /INT1, ADC start input STADC and SPI-1 slave select /SS.
9 P1.3 bidirectional Port 1 bit 3, open-drain when I2C is enabled (required for SDA), multiplexed as external interrupt /INT0 and I2C data line SDA; an external pull-up is required when used as output.
10 P1.2 bidirectional Port 1 bit 2, always open-drain (I2C clock SCL), multiplexed as Timer 0 external input T0 and input capture IC0; an external pull-up is required.
11 P1.1 bidirectional Port 1 bit 1, quasi-bidirectional, multiplexed as UART receive RXD (selectable to P2.7 via AUXR1.6).
12 P1.0 bidirectional Port 1 bit 0, quasi-bidirectional, multiplexed as UART transmit TXD (selectable to P2.6 via AUXR1.6).
13 P0.7 bidirectional Port 0 bit 7, quasi-bidirectional, multiplexed as Timer 1 external input T1, ADC channel 6 input, KB7 keyboard interrupt and input capture IC1; in ADC use the input voltage must stay between AVSS and Vref+.
14 P0.6 bidirectional Port 0 bit 6, quasi-bidirectional, multiplexed as ADC channel 5 input and KB6 keyboard interrupt input.
15 VDD power_in Supply voltage: 2.4 V to 5.5 V at FOSC 4-12 MHz and 3.0 V to 5.5 V at FOSC 4-24 MHz per the DC electrical table (Section 2 states 4.5 V to 5.5 V for 24 MHz).
16 P0.5 bidirectional Port 0 bit 5, quasi-bidirectional, multiplexed as ADC channel 4 input and KB5 keyboard interrupt input.
17 P0.4 bidirectional Port 0 bit 4, quasi-bidirectional, multiplexed as ADC channel 3 input and KB4 keyboard interrupt input.
18 P0.3 bidirectional Port 0 bit 3, quasi-bidirectional, multiplexed as ADC channel 2 input and KB3 keyboard interrupt input.
19 P0.2 bidirectional Port 0 bit 2, quasi-bidirectional, multiplexed as ADC channel 1 input, KB2 keyboard interrupt input and BRAKE (PWM clamp/fault input, active level selected by PWMCON1.6).
20 P0.1 bidirectional Port 0 bit 1, quasi-bidirectional, multiplexed as PWM0 output, ADC channel 0 input and KB1 keyboard interrupt input.

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package SOP-20-300mil
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature -40 85 C 166
Storage temperature -55 150 C 166
VDD to VSS voltage -0.3 6.5 V 166
Voltage on other pins to VSS -0.3 V max printed as (VDD+0.3) 166
Operating voltage VDD VDD 3 5.5 V Fosc = 4 MHz ~ 24 MHz 166
Operating voltage VDD VDD 2.4 5.5 V Fosc = 4 MHz ~12 MHz 166
Input low voltage (standard port TTL input) VIL -0.5 V 2.4< VDD< 5.5V; max printed as 0.2VDD-0.1 166
Input low voltage (standard port Schmitt input) VIL1 -0.5 V 2.4< VDD< 5.5V; max printed as 0.3VDD 166
Input low voltage (/RST, XTAL1) VIL2 -0.5 V 2.4< VDD< 5.5V; max printed as 0.2VDD-0.1 166
Output low voltage (standard port P0, P2) VOL 0.45 V VDD=4.5V, IOL= 20 mA 167
Output low voltage (P10, P11, P14, P16, P17) VOL1 0.45 V VDD=4.5V, IOL= 38 mA 167
Output high voltage (standard port, quasi-bidirectional) VOH 2.4 V VDD=4.5V, IOH= -380 μA 167
Output high voltage (standard port, quasi-bidirectional) VOH 2 V VDD=2.4V, IOH= -48 μA 167
Output high voltage (standard port, push-pull) VOH1 2.4 V VDD=4.5V, IOH= -28.0 mA 167
Output high voltage (standard port, push-pull) VOH1 2 V VDD=2.4V, IOH= -3.5 mA 167
Logic 0 input current (standard port, quasi-bidirectional) IIL -50 -40 μA VDD=5.5V, VIN=0.4V 167
Logic 1 to 0 transition current (standard port, quasi-bidirectional) ITL -650 -550 μA VDD=5.5V, VIN=2.0V 167
Input leakage current ILI -10 10 μA 0 < VIN< VDD <1 167
Operating current (normal mode) IOP 3.1 mA XTAL 12MHz, VDD=5.0V 167
Operating current (normal mode) IOP 4.3 mA XTAL 24MHz, VDD=5.5V 167
Operating current (normal mode) IOP 1.7 mA XTAL 12MHz, VDD=3.3V 168
Operating current (normal mode) IOP 3.2 mA XTAL 24MHz, VDD=3.3V 168
Operating current (normal mode) IOP 2.8 mA 内部晶振 22.1184MHz,VDD=5V 168
Idle mode operating current IIDLE 2.7 mA XTAL 12MHz, VDD=5.0V 168
Idle mode operating current IIDLE 3.7 mA XTAL 24MHz, VDD=5.5V 168
Idle mode operating current IIDLE 1.3 mA XTAL 12MHz, VDD=3.3V 168
Idle mode operating current IIDLE 2.3 mA XTAL 24MHz, VDD=3.3V 168
Idle mode operating current IIDLE 2 mA 内部RC 晶振 22.1184MHz,VDD=5V 168
Power-down mode operating current IPD 30 μA 168
Reset pin internal pull-up resistance RRST 100 250 KΩ 2.4< VDD< 5.5V 168
BOD38 detection voltage VBOD38 3.5 3.8 4.1 V 温度=25℃ 168
BOD38 detection voltage VBOD38 3.5 3.8 4.9 V 温度=85℃ 168
BOD38 detection voltage VBOD38 3 3.8 4.1 V 温度=-40℃ 168
BOD27 detection voltage VBOD27 2.5 2.7 2.9 V 温度=25℃ 168
BOD27 detection voltage VBOD27 2.5 2.7 3.1 V 温度=85℃ 168
BOD27 detection voltage VBOD27 2.4 2.7 2.9 V 温度=-40℃ 168
ADC operating voltage VDD 2.7 5.5 V 169
Integral nonlinearity error INL -1 1 LSB 169
Differential nonlinearity error DNL -1 1 LSB 169
Gain error Ge -1 1 LSB 169
Offset error Ofe -4 4 LSB 169
Bandgap reference voltage VBG 1 1.3 1.6 V 169
External clock input frequency (external crystal source) 4 24 MHz 外部晶振源 170
Clock high time tCHCX 20.8 Ns 170
Clock low time tCLCX 20.8 Ns 170
Clock rise time tCLCH 10 Ns 170
Clock fall time tCHCL 10 Ns 170
Internal RC oscillator center frequency 22.1184 MHz 170
Internal oscillator frequency deviation -1 1 % +250C @ VDD=5V 170
Internal oscillator frequency deviation -3 3 % +250C @ VDD=2.7~5.5V 170
Internal oscillator frequency deviation -5 5 % -100C~+700C @ VDD=2.7~5.5V 170
Internal oscillator frequency deviation -8 8 % -400C~+850C @ VDD=2.7~5.5V 170

CAD (KiCad official)

  • Symbol: N79E814AS20
  • Footprint: Package_SO:SOP-20_7.5x12.8mm_P1.27mm
  • 3D model: SOP-20-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: n79e814as20-etched.step / n79e814as20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); n79e814as20.step / n79e814as20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (179 pp, sha256 d6a503318845ce88, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF