main
History Download
Ray Publish 0.1.0 53f747b

N76E885AT20

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

N76E885AT20 from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground potential for the device.
2 P1.0/XIN/PWM0 bidirectional Port 1 bit 0 is available only when the internal oscillator is the system clock; when a crystal/resonator or external clock is used it is the XIN input to the internal inverting amplifier (or the external clock input in ECLK mode), and it can also be PWM0 output.
3 P1.1/XOUT/PWM1 bidirectional Port 1 bit 1 is available when the internal oscillator or external clock input is the system clock; when a crystal is used it is XOUT, the inverted output of XIN, and it can also be PWM1 output.
4 P1.2/RST input Input-only Schmitt-trigger pin that is active-low hardware device reset when RPD (CONFIG0.2) is left unprogrammed, with an internal pull-up enabled; when RPD is programmed as 0 it is a general input-only pin P1.2 and reads as 0 if RPD is unprogrammed.
5 P2.0/AIN9/IC0/T0/RXD bidirectional Port 2 bit 0 with ADC input AIN9, input capture IC0, Timer 0 external count input, and UART0 receive RXD; it is one of the high sink current capable pins.
6 P2.1/IC1/T1/MOSI bidirectional Port 2 bit 1 with input capture IC1, Timer 1 external count input, and SPI master output/slave input MOSI; it is one of the high sink current capable pins.
7 P2.2/IC2/MISO bidirectional Port 2 bit 2 with input capture IC2 and SPI master input/slave output MISO.
8 P2.3/SDA/FB/STADC bidirectional Port 2 bit 3 with I2C data SDA, Fault Brake input FB, and external ADC start trigger STADC.
9 P2.4/RXD_1 bidirectional Port 2 bit 4 with UART1 serial receive input RXD_1.
10 P2.5/TXD_1 bidirectional Port 2 bit 5 with UART1 serial transmit data output TXD_1.
11 P2.6/AIN8/PWM7/CLO bidirectional Port 2 bit 6 with ADC input AIN8, PWM7 output, and system clock output CLO.
12 P0.7/AIN7/PWM6 bidirectional Port 0 bit 7 with ADC input AIN7 and PWM6 output; Port 0 pins are input-only after reset.
13 P0.6/AIN6/PWM5/SCL bidirectional Port 0 bit 6 with ADC input AIN6, PWM5 output, and I2C clock SCL.
14 P0.5/AIN5/PWM4/SPCLK bidirectional Port 0 bit 5 with ADC input AIN5, PWM4 output, and SPI clock SPCLK.
15 P0.4/AIN4/SS bidirectional Port 0 bit 4 with ADC input AIN4 and SPI slave select input SS.
16 P0.3/AIN3/PWM3/TXD bidirectional Port 0 bit 3 with ADC input AIN3, PWM3 output, and UART0 transmit data TXD (exchangeable with RXD via UART0PX); it is one of the high sink current capable pins.
17 P0.2/AIN2/PWM2 bidirectional Port 0 bit 2 with ADC input AIN2 and PWM2 output; it is one of the high sink current capable pins.
18 P0.1/AIN1/INT1/ICPCK/OCDCK bidirectional Port 0 bit 1 with ADC input AIN1, external interrupt 1 INT1, ICP clock input ICPCK, and OCD clock OCDCK; it is one of the high sink current capable pins.
19 P0.0/AIN0/VREF/INT0/ICPDA/OCDDA bidirectional Port 0 bit 0 with ADC input AIN0, ADC VREF voltage input, external interrupt 0 INT0, ICP data ICPDA, and OCD data OCDDA.
20 VDD power_in Power supply voltage VDD for operation.

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature under bias (TA) TA -40 105 C 187
Storage temperature range -55 150 C 187
Voltage on VDD pin to GND pin VDD -0.3 6.3 V 187
Voltage on any other pin to GND pin (printed as -0.3 to (VDD+0.3); upper limit not numeric) -0.3 V 187
Operating voltage VDD 2.4 5.5 V F = 0 to 25 MHz 187
Output low voltage (normal sink current strength) VOL 0.4 V VDD = 4.5V, IOL = 16mA 187
Output low voltage (P0.1P0.3, P2.0P2.1 large sink current strength) VOL1 0.4 V VDD = 4.5V, IOL = 32mA 187
Output high voltage (quasi-bidirectional mode) VOH 2.4 V VDD = 4.5V, IOH = -38 μA 188
Output high voltage (quasi-bidirectional mode) VOH 2 V VDD = 2.4V, IOH = -40μA 188
Output high voltage (push-pull mode) VOH1 2.4 V VDD = 4.5V, IOH = -16mA 188
Output high voltage (push-pull mode) VOH1 2 V VDD = 2.4V, IOH = -2mA 188
Logical 0 input current (quasi-bidirectional mode) IIL -50 μA VDD = 5.5V, VIN = 0.4V 188
Logical 1-to-0 transition current (quasi-bidirectional mode) ITL -650 μA VDD = 5.5V 188
Input leakage current ILI -10 1 10 μA open-drain or input-only mode 188
RST pin internal pull-low resistor RRST 50 600 kΩ 188
Normal operating current IDD 3.9 4.3 mA HIRC 188
Normal operating current IDD 220 280 μA LXT, XTGS[1:0] = [0,1] 188
Normal operating current IDD 190 250 μA LIRC 188
Idle mode current IIDL 180 250 μA LXT, XTGS[1:0] = [0,1] 188
Idle mode current IIDL 170 240 μA LIRC 188
Power-down mode current (BOD off, LXT off) IPD 1.3 2.5 μA TA = 25℃ 188
Power-down mode current (BOD off, LXT off) IPD 20 μA TA = -40℃ to +105℃ 188
Power-down mode current (BOD off, LXT on, XTGS[1:0] = [0,1]) IPD1 2.3 4 μA TA = 25℃ 188
Power-down mode current (BOD off, LXT on, XTGS[1:0] = [0,1]) IPD1 23 μA TA = -40℃ to +105℃ 188
External clock input frequency (ECLK) 1/tCLCL 0 25 MHz 189
High-speed crystal/resonator frequency (HXT) 1/tCLCL 2 25 MHz 189
External clock input high time tCHCX 30 ns 189
External clock input low time tCLCX 30 ns 189
High-speed oscillator frequency (HIRC), frequency deviation 1% FHIRC 21.897 22.118 22.34 MHz TA = -10℃ to +70℃ 190
High-speed oscillator frequency (HIRC), frequency deviation 2% FHIRC 21.676 22.56 MHz TA = -40℃ to +105℃ 190
Low-speed oscillator frequency (LIRC), frequency deviation 35% FLIRC 6.5 10 13.5 kHz 190
RST pin detect pulse width TRST 450 μs 190
Power-on reset voltage VPOR 1.3 1.4 1.5 V 190
Brown-out threshold 4.3V VBOD0 4.15 4.3 4.45 V BOV[2:0] = [0,0,0] 191
Brown-out threshold 3.7V VBOD1 3.55 3.7 3.85 V BOV[2:0] = [0,0,1] 191
Brown-out threshold 3.0V VBOD2 2.85 3 3.15 V BOV[2:0] = [0,1,0] 191
Brown-out threshold 2.7V VBOD3 2.6 2.7 2.8 V BOV[2:0] = [0,1,1] 191
Brown-out threshold 2.4V VBOD4 2.3 2.4 2.5 V BOV[2:0] = [1,0,0] 191
Brown-out threshold 2.2V VBOD5 2.1 2.2 2.3 V BOV[2:0] = [1,0,1] 191
Brown-out threshold 2.0V VBOD6 1.9 2 2.1 V BOV[2:0] = [1,1,0] 191
Brown-out threshold 1.7V VBOD7 1.6 1.7 1.8 V BOV[2:0] = [1,1,1] 191
Brown-out hysteresis VBODHYS 50 65 80 mV LPBOD[1:0] = [0,0] only 191
Brown-out quiescent current IBOD 55 70 μA VDD = 5V, LPBOD[1:0] = [0,0] 191
Brown-out quiescent current IBOD 14 16 μA VDD = 5V, LPBOD[1:0] = [0,1] 191
Brown-out quiescent current IBOD 4 6 μA VDD = 5V, LPBOD[1:0] = [1,0] 191
Brown-out quiescent current IBOD 1.5 2.5 μA VDD = 5V, LPBOD[1:0] = [1,1] 191
Band-gap voltage VBG 1.16 1.22 1.28 V 191
ADC operating voltage VAVDD 2.4 5.5 V 191
ADC power supply current IAVDD 160 220 μA VAVDD = 5V, VREFSEL = 0 191
Analog reference voltage (printed maximum VAVDD, not numeric) VVREF 1.8 V 191
Differential non-linearity error DNL 1.5 2 LSB 191
Integral non-linearity error (printed typ ±1 not encoded) INL -2 2 LSB 191
Full scale error FE 1.5 2.5 LSB 191
Total un-adjust error TUE 3.5 4 LSB 192

CAD (KiCad official)

  • Symbol: N76E885AT20
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: n76e885at20-etched.step / n76e885at20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); n76e885at20.step / n76e885at20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (196 pp, sha256 df2b5fbe4ff1b46c, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF