Generated by kicad-footprint-generator · KiCad file format 20260206
N76E885AT20
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
N76E885AT20 from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground potential for the device. |
| 2 | P1.0/XIN/PWM0 | bidirectional | Port 1 bit 0 is available only when the internal oscillator is the system clock; when a crystal/resonator or external clock is used it is the XIN input to the internal inverting amplifier (or the external clock input in ECLK mode), and it can also be PWM0 output. |
| 3 | P1.1/XOUT/PWM1 | bidirectional | Port 1 bit 1 is available when the internal oscillator or external clock input is the system clock; when a crystal is used it is XOUT, the inverted output of XIN, and it can also be PWM1 output. |
| 4 | P1.2/RST | input | Input-only Schmitt-trigger pin that is active-low hardware device reset when RPD (CONFIG0.2) is left unprogrammed, with an internal pull-up enabled; when RPD is programmed as 0 it is a general input-only pin P1.2 and reads as 0 if RPD is unprogrammed. |
| 5 | P2.0/AIN9/IC0/T0/RXD | bidirectional | Port 2 bit 0 with ADC input AIN9, input capture IC0, Timer 0 external count input, and UART0 receive RXD; it is one of the high sink current capable pins. |
| 6 | P2.1/IC1/T1/MOSI | bidirectional | Port 2 bit 1 with input capture IC1, Timer 1 external count input, and SPI master output/slave input MOSI; it is one of the high sink current capable pins. |
| 7 | P2.2/IC2/MISO | bidirectional | Port 2 bit 2 with input capture IC2 and SPI master input/slave output MISO. |
| 8 | P2.3/SDA/FB/STADC | bidirectional | Port 2 bit 3 with I2C data SDA, Fault Brake input FB, and external ADC start trigger STADC. |
| 9 | P2.4/RXD_1 | bidirectional | Port 2 bit 4 with UART1 serial receive input RXD_1. |
| 10 | P2.5/TXD_1 | bidirectional | Port 2 bit 5 with UART1 serial transmit data output TXD_1. |
| 11 | P2.6/AIN8/PWM7/CLO | bidirectional | Port 2 bit 6 with ADC input AIN8, PWM7 output, and system clock output CLO. |
| 12 | P0.7/AIN7/PWM6 | bidirectional | Port 0 bit 7 with ADC input AIN7 and PWM6 output; Port 0 pins are input-only after reset. |
| 13 | P0.6/AIN6/PWM5/SCL | bidirectional | Port 0 bit 6 with ADC input AIN6, PWM5 output, and I2C clock SCL. |
| 14 | P0.5/AIN5/PWM4/SPCLK | bidirectional | Port 0 bit 5 with ADC input AIN5, PWM4 output, and SPI clock SPCLK. |
| 15 | P0.4/AIN4/SS | bidirectional | Port 0 bit 4 with ADC input AIN4 and SPI slave select input SS. |
| 16 | P0.3/AIN3/PWM3/TXD | bidirectional | Port 0 bit 3 with ADC input AIN3, PWM3 output, and UART0 transmit data TXD (exchangeable with RXD via UART0PX); it is one of the high sink current capable pins. |
| 17 | P0.2/AIN2/PWM2 | bidirectional | Port 0 bit 2 with ADC input AIN2 and PWM2 output; it is one of the high sink current capable pins. |
| 18 | P0.1/AIN1/INT1/ICPCK/OCDCK | bidirectional | Port 0 bit 1 with ADC input AIN1, external interrupt 1 INT1, ICP clock input ICPCK, and OCD clock OCDCK; it is one of the high sink current capable pins. |
| 19 | P0.0/AIN0/VREF/INT0/ICPDA/OCDDA | bidirectional | Port 0 bit 0 with ADC input AIN0, ADC VREF voltage input, external interrupt 0 INT0, ICP data ICPDA, and OCD data OCDDA. |
| 20 | VDD | power_in | Power supply voltage VDD for operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature under bias (TA) | TA | -40 | 105 | C | 187 | ||
| Storage temperature range | -55 | 150 | C | 187 | |||
| Voltage on VDD pin to GND pin | VDD | -0.3 | 6.3 | V | 187 | ||
| Voltage on any other pin to GND pin (printed as -0.3 to (VDD+0.3); upper limit not numeric) | -0.3 | V | 187 | ||||
| Operating voltage | VDD | 2.4 | 5.5 | V | F = 0 to 25 MHz | 187 | |
| Output low voltage (normal sink current strength) | VOL | 0.4 | V | VDD = 4.5V, IOL = 16mA | 187 | ||
| Output low voltage (P0.1 |
VOL1 | 0.4 | V | VDD = 4.5V, IOL = 32mA | 187 | ||
| Output high voltage (quasi-bidirectional mode) | VOH | 2.4 | V | VDD = 4.5V, IOH = -38 μA | 188 | ||
| Output high voltage (quasi-bidirectional mode) | VOH | 2 | V | VDD = 2.4V, IOH = -40μA | 188 | ||
| Output high voltage (push-pull mode) | VOH1 | 2.4 | V | VDD = 4.5V, IOH = -16mA | 188 | ||
| Output high voltage (push-pull mode) | VOH1 | 2 | V | VDD = 2.4V, IOH = -2mA | 188 | ||
| Logical 0 input current (quasi-bidirectional mode) | IIL | -50 | μA | VDD = 5.5V, VIN = 0.4V | 188 | ||
| Logical 1-to-0 transition current (quasi-bidirectional mode) | ITL | -650 | μA | VDD = 5.5V | 188 | ||
| Input leakage current | ILI | -10 | 1 | 10 | μA | open-drain or input-only mode | 188 |
| RST pin internal pull-low resistor | RRST | 50 | 600 | kΩ | 188 | ||
| Normal operating current | IDD | 3.9 | 4.3 | mA | HIRC | 188 | |
| Normal operating current | IDD | 220 | 280 | μA | LXT, XTGS[1:0] = [0,1] | 188 | |
| Normal operating current | IDD | 190 | 250 | μA | LIRC | 188 | |
| Idle mode current | IIDL | 180 | 250 | μA | LXT, XTGS[1:0] = [0,1] | 188 | |
| Idle mode current | IIDL | 170 | 240 | μA | LIRC | 188 | |
| Power-down mode current (BOD off, LXT off) | IPD | 1.3 | 2.5 | μA | TA = 25℃ | 188 | |
| Power-down mode current (BOD off, LXT off) | IPD | 20 | μA | TA = -40℃ to +105℃ | 188 | ||
| Power-down mode current (BOD off, LXT on, XTGS[1:0] = [0,1]) | IPD1 | 2.3 | 4 | μA | TA = 25℃ | 188 | |
| Power-down mode current (BOD off, LXT on, XTGS[1:0] = [0,1]) | IPD1 | 23 | μA | TA = -40℃ to +105℃ | 188 | ||
| External clock input frequency (ECLK) | 1/tCLCL | 0 | 25 | MHz | 189 | ||
| High-speed crystal/resonator frequency (HXT) | 1/tCLCL | 2 | 25 | MHz | 189 | ||
| External clock input high time | tCHCX | 30 | ns | 189 | |||
| External clock input low time | tCLCX | 30 | ns | 189 | |||
| High-speed oscillator frequency (HIRC), frequency deviation 1% | FHIRC | 21.897 | 22.118 | 22.34 | MHz | TA = -10℃ to +70℃ | 190 |
| High-speed oscillator frequency (HIRC), frequency deviation 2% | FHIRC | 21.676 | 22.56 | MHz | TA = -40℃ to +105℃ | 190 | |
| Low-speed oscillator frequency (LIRC), frequency deviation 35% | FLIRC | 6.5 | 10 | 13.5 | kHz | 190 | |
| RST pin detect pulse width | TRST | 450 | μs | 190 | |||
| Power-on reset voltage | VPOR | 1.3 | 1.4 | 1.5 | V | 190 | |
| Brown-out threshold 4.3V | VBOD0 | 4.15 | 4.3 | 4.45 | V | BOV[2:0] = [0,0,0] | 191 |
| Brown-out threshold 3.7V | VBOD1 | 3.55 | 3.7 | 3.85 | V | BOV[2:0] = [0,0,1] | 191 |
| Brown-out threshold 3.0V | VBOD2 | 2.85 | 3 | 3.15 | V | BOV[2:0] = [0,1,0] | 191 |
| Brown-out threshold 2.7V | VBOD3 | 2.6 | 2.7 | 2.8 | V | BOV[2:0] = [0,1,1] | 191 |
| Brown-out threshold 2.4V | VBOD4 | 2.3 | 2.4 | 2.5 | V | BOV[2:0] = [1,0,0] | 191 |
| Brown-out threshold 2.2V | VBOD5 | 2.1 | 2.2 | 2.3 | V | BOV[2:0] = [1,0,1] | 191 |
| Brown-out threshold 2.0V | VBOD6 | 1.9 | 2 | 2.1 | V | BOV[2:0] = [1,1,0] | 191 |
| Brown-out threshold 1.7V | VBOD7 | 1.6 | 1.7 | 1.8 | V | BOV[2:0] = [1,1,1] | 191 |
| Brown-out hysteresis | VBODHYS | 50 | 65 | 80 | mV | LPBOD[1:0] = [0,0] only | 191 |
| Brown-out quiescent current | IBOD | 55 | 70 | μA | VDD = 5V, LPBOD[1:0] = [0,0] | 191 | |
| Brown-out quiescent current | IBOD | 14 | 16 | μA | VDD = 5V, LPBOD[1:0] = [0,1] | 191 | |
| Brown-out quiescent current | IBOD | 4 | 6 | μA | VDD = 5V, LPBOD[1:0] = [1,0] | 191 | |
| Brown-out quiescent current | IBOD | 1.5 | 2.5 | μA | VDD = 5V, LPBOD[1:0] = [1,1] | 191 | |
| Band-gap voltage | VBG | 1.16 | 1.22 | 1.28 | V | 191 | |
| ADC operating voltage | VAVDD | 2.4 | 5.5 | V | 191 | ||
| ADC power supply current | IAVDD | 160 | 220 | μA | VAVDD = 5V, VREFSEL = 0 | 191 | |
| Analog reference voltage (printed maximum VAVDD, not numeric) | VVREF | 1.8 | V | 191 | |||
| Differential non-linearity error | DNL | 1.5 | 2 | LSB | 191 | ||
| Integral non-linearity error (printed typ ±1 not encoded) | INL | -2 | 2 | LSB | 191 | ||
| Full scale error | FE | 1.5 | 2.5 | LSB | 191 | ||
| Total un-adjust error | TUE | 3.5 | 4 | LSB | 192 |
CAD (KiCad official)
- Symbol:
N76E885AT20 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
n76e885at20-etched.step/n76e885at20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n76e885at20.step/n76e885at20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (196 pp, sha256
df2b5fbe4ff1b46c, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).