main
Ray
Publish 0.1.0
e1b7b51
N21C21ASNDT3G
onsemi · EEPROM · SOT-23-3L
N21C21ASNDT3G from onsemi, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DQ | bidirectional | DQ is the DATA serial I/O and the sole power source for the device, with DC voltage applied to data limited to -0.3 V to 12.5 V and an open-drain output requiring a 5 kΩ external pull-up. |
| 2 | VSS | power_in | VSS is the ground return for the 1-Wire interface. |
| 3 | VSS | power_in | Pin 3 is listed as VSS in the pin description table, and the datasheet gives no separate function for it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3L |
| Category | Memory |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC voltage applied to data | VPU | -0.3 | 12.5 | V | 3 | ||
| Low-level output current | IOL | 40 | mA | 3 | |||
| Operating free-air temperature | TA | -20 | 70 | °C | 3 | ||
| Communication free-air temperature | TA(Comm) | -40 | 85 | °C | 3 | ||
| Junction temperature | TJ | 125 | °C | 3 | |||
| Storage temperature | Tstg | -55 | 125 | °C | 3 | ||
| Pull-up voltage | VPU | 2.65 | 5.5 | V | 3 | ||
| Supply current | IDATA | 20 | µA | VPU = 5.5 V | 3 | ||
| Low-level output voltage | VOL | 0.4 | V | Logic 0, VPU = 5.5 V, IOL = 4 mA, DQ pin | 3 | ||
| Low-level output current (sink) | IOL | 4 | mA | VOL = 0.4 V, DQ pin | 3 | ||
| Low-level input voltage | VIL | 0.8 | V | Logic 0 | 3 | ||
| High-level input voltage | VIH | 2.2 | V | Logic 1 | 3 | ||
| Programming voltage | VPP | 11.5 | 12 | V | 3 | ||
| Serial communication interface pull-up resistance | RPU | 5 | kΩ | 3 | |||
| Bit cycle time | tc | 60 | 120 | µs | 4 | ||
| Write start cycle | tWSTRB | 1 | 15 | µs | 4 | ||
| Write data setup | tWDSU | 15 | µs | 4 | |||
| Write data hold | tWDH | 60 | µs | 4 | |||
| Recovery time | trec | 1 | µs | 4 | |||
| Read start cycle | tRSTRB | 1 | 13 | µs | 4 | ||
| Output data delay | tODD | 13 | µs | 4 | |||
| Output data hold | tODHO | 17 | 60 | µs | 4 | ||
| Reset time | tRST | 480 | µs | 4 | |||
| Presence pulse delay | tPPD | 15 | 60 | µs | 4 | ||
| Presence pulse | tPP | 60 | 240 | µs | 4 | ||
| EPROM programming time | tEPROG | 2500 | µs | 4 | |||
| EDN programming time | tEDN | 5000 | µs | 4 | |||
| Program setup time | tPSU | 5 | µs | 4 | |||
| Program recovery time | tPREC | 5 | µs | 4 | |||
| Program rising-edge time | tPRE | 5 | µs | 4 | |||
| Program falling-edge time | tPFE | 5 | µs | 4 | |||
| Reset recovery time | tRSTREC | 480 | µs | 4 | |||
| DATA pin capacitance | CIN/OUT | 800 | pF | TA = 25°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | nickel | Device Order Number Specific Device Marking Package Type Temperature Range Lead Finish Shipping† N21C21ASNDT3G C21 SOT-23−3 −40°C to +85°C Ni PdAu 3000 / Tape & Reel | 14 |
CAD (KiCad official)
- Symbol:
N21C21ASNDT3G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
n21c21asndt3g-etched.step/n21c21asndt3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n21c21asndt3g.step/n21c21asndt3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
16ff4e203e6049e5, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# N21C21ASNDT3G
**onsemi** · EEPROM · SOT-23-3L
N21C21ASNDT3G from onsemi, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DQ | bidirectional | DQ is the DATA serial I/O and the sole power source for the device, with DC voltage applied to data limited to -0.3 V to 12.5 V and an open-drain output requiring a 5 kΩ external pull-up. |
| 2 | VSS | power_in | VSS is the ground return for the 1-Wire interface. |
| 3 | VSS | power_in | Pin 3 is listed as VSS in the pin description table, and the datasheet gives no separate function for it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3L |
| Category | Memory |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC voltage applied to data | VPU | -0.3 | | 12.5 | V | | 3 |
| Low-level output current | IOL | | | 40 | mA | | 3 |
| Operating free-air temperature | TA | -20 | | 70 | °C | | 3 |
| Communication free-air temperature | TA(Comm) | -40 | | 85 | °C | | 3 |
| Junction temperature | TJ | | | 125 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 3 |
| Pull-up voltage | VPU | 2.65 | | 5.5 | V | | 3 |
| Supply current | IDATA | | | 20 | µA | VPU = 5.5 V | 3 |
| Low-level output voltage | VOL | | | 0.4 | V | Logic 0, VPU = 5.5 V, IOL = 4 mA, DQ pin | 3 |
| Low-level output current (sink) | IOL | 4 | | | mA | VOL = 0.4 V, DQ pin | 3 |
| Low-level input voltage | VIL | | | 0.8 | V | Logic 0 | 3 |
| High-level input voltage | VIH | 2.2 | | | V | Logic 1 | 3 |
| Programming voltage | VPP | 11.5 | | 12 | V | | 3 |
| Serial communication interface pull-up resistance | RPU | | 5 | | kΩ | | 3 |
| Bit cycle time | tc | 60 | | 120 | µs | | 4 |
| Write start cycle | tWSTRB | 1 | | 15 | µs | | 4 |
| Write data setup | tWDSU | | | 15 | µs | | 4 |
| Write data hold | tWDH | 60 | | | µs | | 4 |
| Recovery time | trec | 1 | | | µs | | 4 |
| Read start cycle | tRSTRB | 1 | | 13 | µs | | 4 |
| Output data delay | tODD | | | 13 | µs | | 4 |
| Output data hold | tODHO | 17 | | 60 | µs | | 4 |
| Reset time | tRST | 480 | | | µs | | 4 |
| Presence pulse delay | tPPD | 15 | | 60 | µs | | 4 |
| Presence pulse | tPP | 60 | | 240 | µs | | 4 |
| EPROM programming time | tEPROG | 2500 | | | µs | | 4 |
| EDN programming time | tEDN | 5000 | | | µs | | 4 |
| Program setup time | tPSU | 5 | | | µs | | 4 |
| Program recovery time | tPREC | 5 | | | µs | | 4 |
| Program rising-edge time | tPRE | 5 | | | µs | | 4 |
| Program falling-edge time | tPFE | 5 | | | µs | | 4 |
| Reset recovery time | tRSTREC | 480 | | | µs | | 4 |
| DATA pin capacitance | CIN/OUT | | | 800 | pF | TA = 25°C | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | nickel | Device Order Number Specific Device Marking Package Type Temperature Range Lead Finish Shipping† N21C21ASNDT3G C21 SOT-23−3 −40°C to +85°C Ni PdAu 3000 / Tape & Reel | 14 |
## CAD (KiCad official)
- Symbol: `N21C21ASNDT3G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `n21c21asndt3g-etched.step` / `n21c21asndt3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `n21c21asndt3g.step` / `n21c21asndt3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/n21c21asndt3-d.pdf) (16 pp, sha256 `16ff4e203e6049e5`, retrieved 2026-10-26, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/n21c21asndt3g-datasheet.pdf)