Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

N21C21ASNDT3G

onsemi · EEPROM · SOT-23-3L

N21C21ASNDT3G from onsemi, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DQ bidirectional DQ is the DATA serial I/O and the sole power source for the device, with DC voltage applied to data limited to -0.3 V to 12.5 V and an open-drain output requiring a 5 kΩ external pull-up.
2 VSS power_in VSS is the ground return for the 1-Wire interface.
3 VSS power_in Pin 3 is listed as VSS in the pin description table, and the datasheet gives no separate function for it.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23-3L
Category Memory
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC voltage applied to data VPU -0.3 12.5 V 3
Low-level output current IOL 40 mA 3
Operating free-air temperature TA -20 70 °C 3
Communication free-air temperature TA(Comm) -40 85 °C 3
Junction temperature TJ 125 °C 3
Storage temperature Tstg -55 125 °C 3
Pull-up voltage VPU 2.65 5.5 V 3
Supply current IDATA 20 µA VPU = 5.5 V 3
Low-level output voltage VOL 0.4 V Logic 0, VPU = 5.5 V, IOL = 4 mA, DQ pin 3
Low-level output current (sink) IOL 4 mA VOL = 0.4 V, DQ pin 3
Low-level input voltage VIL 0.8 V Logic 0 3
High-level input voltage VIH 2.2 V Logic 1 3
Programming voltage VPP 11.5 12 V 3
Serial communication interface pull-up resistance RPU 5 kΩ 3
Bit cycle time tc 60 120 µs 4
Write start cycle tWSTRB 1 15 µs 4
Write data setup tWDSU 15 µs 4
Write data hold tWDH 60 µs 4
Recovery time trec 1 µs 4
Read start cycle tRSTRB 1 13 µs 4
Output data delay tODD 13 µs 4
Output data hold tODHO 17 60 µs 4
Reset time tRST 480 µs 4
Presence pulse delay tPPD 15 60 µs 4
Presence pulse tPP 60 240 µs 4
EPROM programming time tEPROG 2500 µs 4
EDN programming time tEDN 5000 µs 4
Program setup time tPSU 5 µs 4
Program recovery time tPREC 5 µs 4
Program rising-edge time tPRE 5 µs 4
Program falling-edge time tPFE 5 µs 4
Reset recovery time tRSTREC 480 µs 4
DATA pin capacitance CIN/OUT 800 pF TA = 25°C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts nickel Device Order Number Specific Device Marking Package Type Temperature Range Lead Finish Shipping† N21C21ASNDT3G C21 SOT-23−3 −40°C to +85°C Ni PdAu 3000 / Tape & Reel 14

CAD (KiCad official)

  • Symbol: N21C21ASNDT3G
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)
  • 3D model files: n21c21asndt3g-etched.step / n21c21asndt3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); n21c21asndt3g.step / n21c21asndt3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (16 pp, sha256 16ff4e203e6049e5, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF