component
MX6505T
Public Made by Adomby adom
Wuxi Maxinmicro DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMX6505T
Wuxi Maxinmicro · DC-DC Converters · SOT-23-6
MX6505T from Wuxi Maxinmicro, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Open-drain output of the first power MOSFETs, typically connected to the outer terminal of the center-tap transformer; keep its traces short because large currents flow through it (D1/D2 absolute max is -0.3 to 36V, with 2.4A peak current). |
| 2 | VCC | power_in | Device supply pin, recommended 2.25V to 5.5V, to be bypassed with a 4.7µF or greater low-ESR capacitor; when VCC ≤ 2.25V the internal undervoltage lockout turns both outputs off. |
| 3 | D2 | output | Open-drain output of the second power MOSFETs, typically connected to the outer terminal of the center-tap transformer; keep its traces short because large currents flow through it (D1/D2 absolute max is -0.3 to 36V, with 2.4A peak current). |
| 4 | GND | power_in | Ground, connected to the source of the power MOSFET switches via an internal sense circuit; the GND pins must be tied to a low-inductance ground plane because of the large currents. |
| 5 | EN | input | Enable input that turns the device on or off; grounding it disables all internal circuitry (EN/CLK absolute max is -0.5 to VCC+0.5V, and the logic-high threshold is 0.4 to 0.7 VCC). |
| 6 | CLK | input | External clock input (100 kHz to 2000 kHz) that is internally pulled down to GND; if a valid clock is not detected the device automatically switches to the internal 420 kHz clock after tCLKTIMER (350 µs). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi Maxinmicro |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
MX6505T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mx6505t-etched.step/mx6505t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx6505t.step/mx6505t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi Maxinmicro datasheet (14 pp, sha256
5845b6d6f265c224, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).