main
Ray
Publish 0.1.0
d2302ab
MX35LF1GE4AB-Z4ITR
MXIC(Macronix) · NAND FLASH · WSON-8(6x8)
MX35LF1GE4AB-Z4ITR from MXIC(Macronix), in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input for the serial NAND device (datasheet gives only the function, no electrical limits). |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, and Serial Data Input & Output (SIO1) for 2xI/O or 4xI/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write protection: connect to GND, or Serial Data Input & Output (SIO2) for 4xI/O read mode. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, and Serial Data Input & Output (SIO0) for 2xI/O or 4xI/O read mode. |
| 6 | SCLK | input | Clock Input; data is latched on the rising edge of SCLK and shifts out on the falling edge (serial mode 0 / mode 3). |
| 7 | HOLD#/SIO3 | bidirectional | Hold, or Serial Data Input & Output (SIO3) for 4xI/O read mode. |
| 8 | VCC | power_in | +3V power supply; the ordering information gives the VCC range as 2.7V to 3.6V (voltage option L). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | WSON-8(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input leakage current | ILI | -10 | 10 | uA | VIN= 0 to VCC Max. | 44 | |
| Output leakage current | ILO | -10 | 10 | uA | VOUT= 0 to VCC Max. | 44 | |
| VCC standby current (CMOS) | ISB | 15 | 50 | uA | VIN=VCC or GND, CS#=VCC | 44 | |
| VCC active current (Sequential Read) | ICC1 | 15 | 30 | mA | f=104MHz | 44 | |
| VCC active current (Program) | ICC2 | 15 | 30 | mA | 44 | ||
| VCC active current (Erase) | ICC3 | 15 | 30 | mA | 44 | ||
| Input low level | VIL | -0.3 | V | 44 | |||
| Output low voltage | VOL | 0.2 | V | IOL= -1mA | 44 | ||
| Input capacitance | CIN | 6 | pF | VIN = 0V; TA = +25°C, F = 1 MHz | 43 | ||
| Output capacitance | COUT | 8 | pF | VOUT = 0V; TA = +25°C, F = 1 MHz | 43 | ||
| Operating temperature range | -40 | 85 | °C | Industrial grade | 43 | ||
| VCC supply voltage | VCC | 2.7 | 3.6 | V | Tolerance, +3.3V nominal | 43 | |
| Temperature under bias | -50 | 125 | °C | 43 | |||
| Storage temperature | -65 | 150 | °C | 43 | |||
| All input voltages with respect to ground | -0.6 | 4.6 | V | With respect to ground (Note 2) | 43 | ||
| VCC supply voltage with respect to ground | VCC | -0.6 | 4.6 | V | With respect to ground (Note 2) | 43 | |
| ESD protection | 2000 | V | Printed as '>2000V' | 43 | |||
| Pin overshoot below Vss | -2 | V | Relative to Vss, up to 20ns during voltage transitions | 43 | |||
| Pin overshoot above VCC | 2 | V | Relative to VCC, up to 20ns during voltage transitions | 43 | |||
| Clock Frequency | fC | 104 | MHz | 44 | |||
| HOLD# high hold time relative to SCLK | tCHHH | 5 | ns | 44 | |||
| HOLD# low hold time relative to SCLK | tCHHL | 5 | ns | 44 | |||
| Command deselect time | tCS | 100 | ns | 44 | |||
| Chip select hold time | tCHSH | 4 | ns | 44 | |||
| Chip select setup time | tSLCH | 4 | ns | 44 | |||
| Chip select non-active setup time | tSHCH | 4 | ns | 44 | |||
| Chip select non-active hold time | tCHSL | 4 | ns | 44 | |||
| Output disable time | tDIS | 20 | ns | 44 | |||
| Hold# non-active setup time relative to SCLK | tHC | 5 | ns | 44 | |||
| Hold# setup time relative to SCLK | tHD | 5 | ns | 44 | |||
| Data input hold time | tHDDAT | 3.5 | ns | 44 | |||
| Output hold time | tHO | 1 | ns | 44 | |||
| Hold to output High-Z | tHZ | 15 | ns | 44 | |||
| Hold to output low-Z | tLZ | 15 | ns | 44 | |||
| Data input setup time | tSUDAT | 3.5 | ns | 44 | |||
| Clock LOW to output Valid | tV | 8 | ns | 44 | |||
| Clock HIGH time | tWH | 4 | ns | 44 | |||
| Clock LOW time | tWL | 4 | ns | 44 | |||
| WP# hold time | tWPH | 100 | ns | 44 | |||
| WP# setup time | tWPS | 20 | ns | 44 | |||
| Data transfer time from NAND Flash array to data register | tRD | 25 | us | 44 | |||
| Dummy busy time for data read sequential (For 1Gb) | tRCBSY | 3.5 | 25 | us | 44 | ||
| Data transfer time from NAND Flash array to data register with internal ECC enabled | tRD_ECC | 45 | 70 | us | 44 | ||
| Page programming time | tPROG | 300 | 600 | us | 44 | ||
| Page programming time under internal ECC enabled | tPROG_ECC | 320 | 600 | us | 44 | ||
| Block Erase Time | tERS | 1 | 3.5 | ms | 44 | ||
| Number of partial-page programming operation supported (NOP) | NOP | 4 | cycle | 44 |
CAD (KiCad official)
- Symbol:
MX35LF1GE4AB-Z4ITR - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx35lf1ge4ab-z4itr-etched.step/mx35lf1ge4ab-z4itr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx35lf1ge4ab-z4itr.step/mx35lf1ge4ab-z4itr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (50 pp, sha256
68fb98eb328d80be, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX35LF1GE4AB-Z4ITR
**MXIC(Macronix)** · NAND FLASH · WSON-8(6x8)
MX35LF1GE4AB-Z4ITR from MXIC(Macronix), in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input for the serial NAND device (datasheet gives only the function, no electrical limits). |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, and Serial Data Input & Output (SIO1) for 2xI/O or 4xI/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write protection: connect to GND, or Serial Data Input & Output (SIO2) for 4xI/O read mode. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, and Serial Data Input & Output (SIO0) for 2xI/O or 4xI/O read mode. |
| 6 | SCLK | input | Clock Input; data is latched on the rising edge of SCLK and shifts out on the falling edge (serial mode 0 / mode 3). |
| 7 | HOLD#/SIO3 | bidirectional | Hold, or Serial Data Input & Output (SIO3) for 4xI/O read mode. |
| 8 | VCC | power_in | +3V power supply; the ordering information gives the VCC range as 2.7V to 3.6V (voltage option L). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | WSON-8(6x8) |
| Category | Memory |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input leakage current | ILI | -10 | | 10 | uA | VIN= 0 to VCC Max. | 44 |
| Output leakage current | ILO | -10 | | 10 | uA | VOUT= 0 to VCC Max. | 44 |
| VCC standby current (CMOS) | ISB | | 15 | 50 | uA | VIN=VCC or GND, CS#=VCC | 44 |
| VCC active current (Sequential Read) | ICC1 | | 15 | 30 | mA | f=104MHz | 44 |
| VCC active current (Program) | ICC2 | | 15 | 30 | mA | | 44 |
| VCC active current (Erase) | ICC3 | | 15 | 30 | mA | | 44 |
| Input low level | VIL | -0.3 | | | V | | 44 |
| Output low voltage | VOL | | | 0.2 | V | IOL= -1mA | 44 |
| Input capacitance | CIN | | | 6 | pF | VIN = 0V; TA = +25°C, F = 1 MHz | 43 |
| Output capacitance | COUT | | | 8 | pF | VOUT = 0V; TA = +25°C, F = 1 MHz | 43 |
| Operating temperature range | | -40 | | 85 | °C | Industrial grade | 43 |
| VCC supply voltage | VCC | 2.7 | | 3.6 | V | Tolerance, +3.3V nominal | 43 |
| Temperature under bias | | -50 | | 125 | °C | | 43 |
| Storage temperature | | -65 | | 150 | °C | | 43 |
| All input voltages with respect to ground | | -0.6 | | 4.6 | V | With respect to ground (Note 2) | 43 |
| VCC supply voltage with respect to ground | VCC | -0.6 | | 4.6 | V | With respect to ground (Note 2) | 43 |
| ESD protection | | 2000 | | | V | Printed as '>2000V' | 43 |
| Pin overshoot below Vss | | -2 | | | V | Relative to Vss, up to 20ns during voltage transitions | 43 |
| Pin overshoot above VCC | | | | 2 | V | Relative to VCC, up to 20ns during voltage transitions | 43 |
| Clock Frequency | fC | | | 104 | MHz | | 44 |
| HOLD# high hold time relative to SCLK | tCHHH | 5 | | | ns | | 44 |
| HOLD# low hold time relative to SCLK | tCHHL | 5 | | | ns | | 44 |
| Command deselect time | tCS | 100 | | | ns | | 44 |
| Chip select hold time | tCHSH | 4 | | | ns | | 44 |
| Chip select setup time | tSLCH | 4 | | | ns | | 44 |
| Chip select non-active setup time | tSHCH | 4 | | | ns | | 44 |
| Chip select non-active hold time | tCHSL | 4 | | | ns | | 44 |
| Output disable time | tDIS | | | 20 | ns | | 44 |
| Hold# non-active setup time relative to SCLK | tHC | 5 | | | ns | | 44 |
| Hold# setup time relative to SCLK | tHD | 5 | | | ns | | 44 |
| Data input hold time | tHDDAT | 3.5 | | | ns | | 44 |
| Output hold time | tHO | 1 | | | ns | | 44 |
| Hold to output High-Z | tHZ | | | 15 | ns | | 44 |
| Hold to output low-Z | tLZ | | | 15 | ns | | 44 |
| Data input setup time | tSUDAT | 3.5 | | | ns | | 44 |
| Clock LOW to output Valid | tV | | | 8 | ns | | 44 |
| Clock HIGH time | tWH | 4 | | | ns | | 44 |
| Clock LOW time | tWL | 4 | | | ns | | 44 |
| WP# hold time | tWPH | 100 | | | ns | | 44 |
| WP# setup time | tWPS | 20 | | | ns | | 44 |
| Data transfer time from NAND Flash array to data register | tRD | | | 25 | us | | 44 |
| Dummy busy time for data read sequential (For 1Gb) | tRCBSY | 3.5 | | 25 | us | | 44 |
| Data transfer time from NAND Flash array to data register with internal ECC enabled | tRD_ECC | 45 | | 70 | us | | 44 |
| Page programming time | tPROG | | 300 | 600 | us | | 44 |
| Page programming time under internal ECC enabled | tPROG_ECC | 320 | | 600 | us | | 44 |
| Block Erase Time | tERS | | 1 | 3.5 | ms | | 44 |
| Number of partial-page programming operation supported (NOP) | NOP | | | 4 | cycle | | 44 |
## CAD (KiCad official)
- Symbol: `MX35LF1GE4AB-Z4ITR`
- Footprint: `Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm`
- 3D model: WSON-8(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `mx35lf1ge4ab-z4itr-etched.step` / `mx35lf1ge4ab-z4itr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx35lf1ge4ab-z4itr.step` / `mx35lf1ge4ab-z4itr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756115822051758080) (50 pp, sha256 `68fb98eb328d80be`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx35lf1ge4ab-z4itr-datasheet.pdf)