main
Ray
Publish 0.1.0
f3066a6
MX25V8006EM1I-13G
MXIC(Macronix) · Pre-ordered Products · SOP-8
MX25V8006EM1I-13G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select; serial access to the device is enabled by the CS# input, and the device enters standby mode when CS# is high and it is not in operation. |
| 2 | SO/SIO1 | bidirectional | Serial data output for 1 x I/O operation, and serial data output SIO1 for Dual Output mode. |
| 3 | WP# | input | Write protection input. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial data input for 1 x I/O operation, and serial data input and output SIO0 for Dual Output mode. |
| 6 | SCLK | input | Serial clock input; the datasheet supports serial clock up to 75MHz for standard operation and 70MHz in Dual Output mode. |
| 7 | HOLD# | input | Hold input that pauses the device without deselecting it. |
| 8 | VCC | power_in | Power supply, specified at 2.35 to 3.6 V for read, erase, and program operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single Power Supply Operation (read, erase, program) | VCC | 2.35 | 3.6 | V | read, erase, program operations | 4 | |
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 30 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 30 | |
| VCC Standby Current | ISB1 | 25 | uA | VIN = VCC or GND, CS# = VCC | 30 | ||
| Deep Power-down Current | ISB2 | 5 | 10 | uA | VIN = VCC or GND, CS# = VCC | 30 | |
| VCC Read (75MHz, 2xI/O read) | ICC1 | 12 | mA | f=75MHz, fT=75MHz (2xI/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 30 | ||
| VCC Read (66MHz) | ICC1 | 12 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 30 | ||
| VCC Read (33MHz) | ICC1 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 30 | ||
| VCC Program Current (PP) | ICC2 | 20 | mA | Program in Progress, CS# = VCC | 30 | ||
| VCC Write Status Register (WRSR) Current | ICC3 | 15 | mA | Program status register in progress, CS#=VCC | 30 | ||
| VCC Sector Erase Current (SE) | ICC4 | 15 | mA | Erase in Progress, CS#=VCC | 30 | ||
| VCC Chip Erase Current (CE) | ICC5 | 20 | mA | Erase in Progress, CS#=VCC | 30 | ||
| Input Low Voltage | VIL | -0.5 | V | 30 | |||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 30 | ||
| Low VCC Write Inhibit Voltage | VWI | 1.5 | 2.3 | V | 30 | ||
| Clock Frequency (FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | 75 | MHz | 31 | |||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | 31 | |||
| Clock Frequency for DREAD instructions | fTSCLK | 70 | MHz | 31 | |||
| Clock High Time | tCH | 13 | ns | @33MHz | 31 | ||
| Clock High Time | tCH | 6 | ns | @75MHz | 31 | ||
| Clock Low Time | tCL | 13 | ns | @33MHz | 31 | ||
| Clock Low Time | tCL | 6 | ns | @75MHz | 31 | ||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | ns | 31 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | ns | 31 | |||
| Data In Setup Time | tDVCH | 2 | ns | 31 | |||
| Data In Hold Time | tCHDX | 5 | ns | 31 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 31 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 31 | |||
| CS# Deselect Time | tSHSL | 15 | ns | Read | 31 | ||
| CS# Deselect Time | tSHSL | 40 | ns | Write | 31 | ||
| Output Disable Time | tSHQZ | 6 | ns | 31 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | 30pF | 31 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | 15pF | 31 | ||
| Output Hold Time | tCLQX | 0 | ns | 31 | |||
| HOLD# Setup Time (relative to SCLK) | tHLCH | 5 | ns | 31 | |||
| HOLD# Hold Time (relative to SCLK) | tCHHH | 5 | ns | 31 | |||
| HOLD Setup Time (relative to SCLK) | tHHCH | 5 | ns | 31 | |||
| HOLD Hold Time (relative to SCLK) | tCHHL | 5 | ns | 31 | |||
| HOLD to Output Low-Z | tHHQX | 6 | ns | 31 | |||
| HOLD# to Output High-Z | tHLQZ | 6 | ns | 31 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | 31 | |||
| Write Protect Hold Time | tSHWL | 100 | ns | 31 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 31 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 8.8 | us | 31 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 8.8 | us | 31 | |||
| Write Status Register Cycle Time | tW | 5 | 40 | ms | 31 | ||
| Byte-Program Time | tBP | 9 | 300 | us | 31 | ||
| Page Program Cycle Time | tPP | 1.4 | 5 | ms | 31 | ||
| Sector Erase Cycle Time | tSE | 60 | 300 | ms | 31 | ||
| Block Erase Cycle Time | tBE | 0.7 | 2 | s | 31 | ||
| Chip Erase Cycle Time | tCE | 7 | 15 | s | 31 | ||
| VCC(min) to CS# low | tVSL | 200 | us | 32 | |||
| VCC Rise Time | tVR | 5 | 500000 | us/V | 44 | ||
| Ambient Operating Temperature | -40 | 85 | °C | 28 | |||
| Storage Temperature | -65 | 150 | °C | 28 | |||
| Current (latch-up) | -100 | 100 | mA | Includes all pins except VCC; VCC = 2.5V, one pin at a time | 46 | ||
| Data retention | 20 | years | 55˚C | 46 | |||
| Erase/Program Cycle | 100000 | cycles | 46 | ||||
| Input Capacitance | CIN | 6 | pF | VIN = 0V | 28 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V | 28 |
CAD (KiCad official)
- Symbol:
MX25V8006EM1I-13G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25v8006em1i-13g-etched.step/mx25v8006em1i-13g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25v8006em1i-13g.step/mx25v8006em1i-13g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (52 pp, sha256
7aef9e0dfea445b7, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX25V8006EM1I-13G
**MXIC(Macronix)** · Pre-ordered Products · SOP-8
MX25V8006EM1I-13G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select; serial access to the device is enabled by the CS# input, and the device enters standby mode when CS# is high and it is not in operation. |
| 2 | SO/SIO1 | bidirectional | Serial data output for 1 x I/O operation, and serial data output SIO1 for Dual Output mode. |
| 3 | WP# | input | Write protection input. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial data input for 1 x I/O operation, and serial data input and output SIO0 for Dual Output mode. |
| 6 | SCLK | input | Serial clock input; the datasheet supports serial clock up to 75MHz for standard operation and 70MHz in Dual Output mode. |
| 7 | HOLD# | input | Hold input that pauses the device without deselecting it. |
| 8 | VCC | power_in | Power supply, specified at 2.35 to 3.6 V for read, erase, and program operations. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single Power Supply Operation (read, erase, program) | VCC | 2.35 | | 3.6 | V | read, erase, program operations | 4 |
| Input Load Current | ILI | -2 | | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 30 |
| Output Leakage Current | ILO | -2 | | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 30 |
| VCC Standby Current | ISB1 | | | 25 | uA | VIN = VCC or GND, CS# = VCC | 30 |
| Deep Power-down Current | ISB2 | | 5 | 10 | uA | VIN = VCC or GND, CS# = VCC | 30 |
| VCC Read (75MHz, 2xI/O read) | ICC1 | | | 12 | mA | f=75MHz, fT=75MHz (2xI/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 30 |
| VCC Read (66MHz) | ICC1 | | | 12 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 30 |
| VCC Read (33MHz) | ICC1 | | | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 30 |
| VCC Program Current (PP) | ICC2 | | | 20 | mA | Program in Progress, CS# = VCC | 30 |
| VCC Write Status Register (WRSR) Current | ICC3 | | | 15 | mA | Program status register in progress, CS#=VCC | 30 |
| VCC Sector Erase Current (SE) | ICC4 | | | 15 | mA | Erase in Progress, CS#=VCC | 30 |
| VCC Chip Erase Current (CE) | ICC5 | | | 20 | mA | Erase in Progress, CS#=VCC | 30 |
| Input Low Voltage | VIL | -0.5 | | | V | | 30 |
| Output Low Voltage | VOL | | | 0.4 | V | IOL = 1.6mA | 30 |
| Low VCC Write Inhibit Voltage | VWI | 1.5 | | 2.3 | V | | 30 |
| Clock Frequency (FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | | | 75 | MHz | | 31 |
| Clock Frequency for READ instructions | fRSCLK | | | 33 | MHz | | 31 |
| Clock Frequency for DREAD instructions | fTSCLK | | | 70 | MHz | | 31 |
| Clock High Time | tCH | 13 | | | ns | @33MHz | 31 |
| Clock High Time | tCH | 6 | | | ns | @75MHz | 31 |
| Clock Low Time | tCL | 13 | | | ns | @33MHz | 31 |
| Clock Low Time | tCL | 6 | | | ns | @75MHz | 31 |
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | | | ns | | 31 |
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | | | ns | | 31 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 31 |
| Data In Hold Time | tCHDX | 5 | | | ns | | 31 |
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | | | ns | | 31 |
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | | | ns | | 31 |
| CS# Deselect Time | tSHSL | 15 | | | ns | Read | 31 |
| CS# Deselect Time | tSHSL | 40 | | | ns | Write | 31 |
| Output Disable Time | tSHQZ | | | 6 | ns | | 31 |
| Clock Low to Output Valid | tCLQV | | | 8 | ns | 30pF | 31 |
| Clock Low to Output Valid | tCLQV | | | 6 | ns | 15pF | 31 |
| Output Hold Time | tCLQX | 0 | | | ns | | 31 |
| HOLD# Setup Time (relative to SCLK) | tHLCH | 5 | | | ns | | 31 |
| HOLD# Hold Time (relative to SCLK) | tCHHH | 5 | | | ns | | 31 |
| HOLD Setup Time (relative to SCLK) | tHHCH | 5 | | | ns | | 31 |
| HOLD Hold Time (relative to SCLK) | tCHHL | 5 | | | ns | | 31 |
| HOLD to Output Low-Z | tHHQX | | | 6 | ns | | 31 |
| HOLD# to Output High-Z | tHLQZ | | | 6 | ns | | 31 |
| Write Protect Setup Time | tWHSL | 20 | | | ns | | 31 |
| Write Protect Hold Time | tSHWL | 100 | | | ns | | 31 |
| CS# High to Deep Power-down Mode | tDP | | | 10 | us | | 31 |
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | | | 8.8 | us | | 31 |
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | | | 8.8 | us | | 31 |
| Write Status Register Cycle Time | tW | | 5 | 40 | ms | | 31 |
| Byte-Program Time | tBP | | 9 | 300 | us | | 31 |
| Page Program Cycle Time | tPP | | 1.4 | 5 | ms | | 31 |
| Sector Erase Cycle Time | tSE | | 60 | 300 | ms | | 31 |
| Block Erase Cycle Time | tBE | | 0.7 | 2 | s | | 31 |
| Chip Erase Cycle Time | tCE | | 7 | 15 | s | | 31 |
| VCC(min) to CS# low | tVSL | | | 200 | us | | 32 |
| VCC Rise Time | tVR | 5 | | 500000 | us/V | | 44 |
| Ambient Operating Temperature | | -40 | | 85 | °C | | 28 |
| Storage Temperature | | -65 | | 150 | °C | | 28 |
| Current (latch-up) | | -100 | | 100 | mA | Includes all pins except VCC; VCC = 2.5V, one pin at a time | 46 |
| Data retention | | 20 | | | years | 55˚C | 46 |
| Erase/Program Cycle | | 100000 | | | cycles | | 46 |
| Input Capacitance | CIN | | | 6 | pF | VIN = 0V | 28 |
| Output Capacitance | COUT | | | 8 | pF | VOUT = 0V | 28 |
## CAD (KiCad official)
- Symbol: `MX25V8006EM1I-13G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mx25v8006em1i-13g-etched.step` / `mx25v8006em1i-13g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx25v8006em1i-13g.step` / `mx25v8006em1i-13g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](docs/mx25v8006em1i-13g-datasheet.pdf) (52 pp, sha256 `7aef9e0dfea445b7`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx25v8006em1i-13g-datasheet.pdf)