main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mx25v8006em1i-13g: viewers · Ray
mx25v8006em1i-13g-etched.glb Publish 0.1.0 · Ray
mx25v8006em1i-13g-etched.step mx25v8006em1i-13g: factory component page (tier=lcsc) · Ray
mx25v8006em1i-13g-hero.glb mx25v8006em1i-13g: hero GLB from the etched model (keeps the MPN mark) · Ray
mx25v8006em1i-13g-hero.overlay.json Publish 0.1.0 · Ray
mx25v8006em1i-13g.glb Publish 0.1.0 · Ray
mx25v8006em1i-13g.kicad_mod Publish 0.1.0 · Ray
mx25v8006em1i-13g.kicad_sym Publish 0.1.0 · Ray
mx25v8006em1i-13g.lbr Publish 0.1.0 · Ray
mx25v8006em1i-13g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

MX25V8006EM1I-13G

MXIC(Macronix) · Pre-ordered Products · SOP-8

MX25V8006EM1I-13G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip select; serial access to the device is enabled by the CS# input, and the device enters standby mode when CS# is high and it is not in operation.
2 SO/SIO1 bidirectional Serial data output for 1 x I/O operation, and serial data output SIO1 for Dual Output mode.
3 WP# input Write protection input.
4 GND power_in Ground reference for the device.
5 SI/SIO0 bidirectional Serial data input for 1 x I/O operation, and serial data input and output SIO0 for Dual Output mode.
6 SCLK input Serial clock input; the datasheet supports serial clock up to 75MHz for standard operation and 70MHz in Dual Output mode.
7 HOLD# input Hold input that pauses the device without deselecting it.
8 VCC power_in Power supply, specified at 2.35 to 3.6 V for read, erase, and program operations.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Electronic Tools/Instruments/Consumables
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Single Power Supply Operation (read, erase, program) VCC 2.35 3.6 V read, erase, program operations 4
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 30
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 30
VCC Standby Current ISB1 25 uA VIN = VCC or GND, CS# = VCC 30
Deep Power-down Current ISB2 5 10 uA VIN = VCC or GND, CS# = VCC 30
VCC Read (75MHz, 2xI/O read) ICC1 12 mA f=75MHz, fT=75MHz (2xI/O read), SCLK=0.1VCC/0.9VCC, SO=Open 30
VCC Read (66MHz) ICC1 12 mA f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open 30
VCC Read (33MHz) ICC1 4 mA f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open 30
VCC Program Current (PP) ICC2 20 mA Program in Progress, CS# = VCC 30
VCC Write Status Register (WRSR) Current ICC3 15 mA Program status register in progress, CS#=VCC 30
VCC Sector Erase Current (SE) ICC4 15 mA Erase in Progress, CS#=VCC 30
VCC Chip Erase Current (CE) ICC5 20 mA Erase in Progress, CS#=VCC 30
Input Low Voltage VIL -0.5 V 30
Output Low Voltage VOL 0.4 V IOL = 1.6mA 30
Low VCC Write Inhibit Voltage VWI 1.5 2.3 V 30
Clock Frequency (FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) fSCLK 75 MHz 31
Clock Frequency for READ instructions fRSCLK 33 MHz 31
Clock Frequency for DREAD instructions fTSCLK 70 MHz 31
Clock High Time tCH 13 ns @33MHz 31
Clock High Time tCH 6 ns @75MHz 31
Clock Low Time tCL 13 ns @33MHz 31
Clock Low Time tCL 6 ns @75MHz 31
CS# Active Setup Time (relative to SCLK) tSLCH 5 ns 31
CS# Not Active Hold Time (relative to SCLK) tCHSL 5 ns 31
Data In Setup Time tDVCH 2 ns 31
Data In Hold Time tCHDX 5 ns 31
CS# Active Hold Time (relative to SCLK) tCHSH 5 ns 31
CS# Not Active Setup Time (relative to SCLK) tSHCH 5 ns 31
CS# Deselect Time tSHSL 15 ns Read 31
CS# Deselect Time tSHSL 40 ns Write 31
Output Disable Time tSHQZ 6 ns 31
Clock Low to Output Valid tCLQV 8 ns 30pF 31
Clock Low to Output Valid tCLQV 6 ns 15pF 31
Output Hold Time tCLQX 0 ns 31
HOLD# Setup Time (relative to SCLK) tHLCH 5 ns 31
HOLD# Hold Time (relative to SCLK) tCHHH 5 ns 31
HOLD Setup Time (relative to SCLK) tHHCH 5 ns 31
HOLD Hold Time (relative to SCLK) tCHHL 5 ns 31
HOLD to Output Low-Z tHHQX 6 ns 31
HOLD# to Output High-Z tHLQZ 6 ns 31
Write Protect Setup Time tWHSL 20 ns 31
Write Protect Hold Time tSHWL 100 ns 31
CS# High to Deep Power-down Mode tDP 10 us 31
CS# High to Standby Mode without Electronic Signature Read tRES1 8.8 us 31
CS# High to Standby Mode with Electronic Signature Read tRES2 8.8 us 31
Write Status Register Cycle Time tW 5 40 ms 31
Byte-Program Time tBP 9 300 us 31
Page Program Cycle Time tPP 1.4 5 ms 31
Sector Erase Cycle Time tSE 60 300 ms 31
Block Erase Cycle Time tBE 0.7 2 s 31
Chip Erase Cycle Time tCE 7 15 s 31
VCC(min) to CS# low tVSL 200 us 32
VCC Rise Time tVR 5 500000 us/V 44
Ambient Operating Temperature -40 85 °C 28
Storage Temperature -65 150 °C 28
Current (latch-up) -100 100 mA Includes all pins except VCC; VCC = 2.5V, one pin at a time 46
Data retention 20 years 55˚C 46
Erase/Program Cycle 100000 cycles 46
Input Capacitance CIN 6 pF VIN = 0V 28
Output Capacitance COUT 8 pF VOUT = 0V 28

CAD (KiCad official)

  • Symbol: MX25V8006EM1I-13G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25v8006em1i-13g-etched.step / mx25v8006em1i-13g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25v8006em1i-13g.step / mx25v8006em1i-13g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (52 pp, sha256 7aef9e0dfea445b7, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF