Generated by kicad-footprint-generator · KiCad file format 20260206
MX25U1633FZUI
MXIC(Macronix) · Pre-ordered Products · USON-8(2x3)
MX25U1633FZUI from MXIC(Macronix), in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; serial access to the device is enabled by CS# input. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, and serial data input and output (SIO1) for 4 x I/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write Protection active low, or serial data input and output (SIO2) for 4 x I/O read mode; it has an internal pull-up that is disabled if the pin is physically connected in the system. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, and serial data input and output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Clock input. |
| 7 | HOLD#/SIO3 | bidirectional | Pauses the device without deselecting it, or serial data input and output (SIO3) for 4 x I/O read mode; it has an internal pull-up that is disabled if the pin is physically connected in the system. |
| 8 | VCC | power_in | Power Supply. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8(2x3) |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 62 | ||
| Storage Temperature | -65 | 150 | °C | 62 | |||
| Applied Input Voltage | -0.5 | V | 62 | ||||
| Applied Output Voltage | -0.5 | V | 62 | ||||
| VCC to Ground Potential | -0.5 | 2.5 | V | 62 | |||
| Operating Voltage (VCC) | VCC | 1.65 | 2 | V | For Read, Erase and Program operations | 4 | |
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 64 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 64 | |
| Leakage Current while WP# at Vhv | Iwph | 30 | uA | VCC < 2.1V | 64 | ||
| VCC Standby Current | ISB1 | 9 | 50 | uA | VIN = VCC or GND, CS# = VCC | 64 | |
| Deep Power-down Current | ISB2 | 0.2 | 2 | uA | VIN = VCC or GND, CS# = VCC | 64 | |
| VCC Read | ICC1 | 3.8 | 6.5 | mA | f=80MHz; SCLK=0.1VCC/0.9VCC; SO=Open | 64 | |
| VCC Read (2x I/O) | ICC1 | 4.2 | 6.5 | mA | f=80MHz (2x I/O); SCLK=0.1VCC/0.9VCC; SO=Open | 64 | |
| VCC Read (4x I/O) | ICC1 | 4.2 | 6.5 | mA | f=33MHz (4x I/O); SCLK=0.1VCC/0.9VCC; SO=Open | 64 | |
| VCC Read (4x I/O) | ICC1 | 6.5 | 9 | mA | f=80MHz (4x I/O); SCLK=0.1VCC/0.9VCC; SO=Open | 64 | |
| VCC Program Current (PP) | ICC2 | 5.8 | 10 | mA | Program in Progress, CS# = VCC | 64 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 3.5 | 10 | mA | Program status register in progress, CS#=VCC | 64 | |
| VCC Sector/Block (64K) Erase Current (SE/BE) | ICC4 | 3.5 | 10 | mA | Erase in Progress, CS#=VCC | 64 | |
| VCC Chip Erase Current (CE) | ICC5 | 4 | 10 | mA | Erase in Progress, CS#=VCC | 64 | |
| High Voltage Applied at WP# pin | Vhv | 7 | 8 | V | Test Condition, VCC=2.0V | 64 | |
| Input Low Voltage | VIL | -0.5 | V | 64 | |||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 64 | ||
| Clock Frequency (fSCLK instructions) | fSCLK | 80 | MHz | FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR; min printed as D.C. | 65 | ||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | 65 | |||
| Clock Frequency for 2READ/DREAD instructions | fTSCLK | 80 | MHz | 65 | |||
| Clock Frequency for 4READ/QREAD instructions | fQ | 80 | MHz | 65 | |||
| Clock Frequency for 4PP (Quad page program) | f4PP | 80 | MHz | 65 | |||
| Clock High Time (Normal Read) | tCH | 13 | ns | Normal Read (fRSCLK) | 65 | ||
| Clock Low Time (Normal Read) | tCL | 13 | ns | Normal Read (fRSCLK) | 65 | ||
| Clock Rise Time (peak to peak) | tCLCH | 0.1 | V/ns | 65 | |||
| Clock Fall Time (peak to peak) | tCHCL | 0.1 | V/ns | 65 | |||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | ns | 65 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | ns | 65 | |||
| Data In Setup Time | tDVCH | 2 | ns | 65 | |||
| Data In Hold Time | tCHDX | 3 | ns | 65 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 65 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 65 | |||
| CS# Deselect Time | tSHSL | 5 | ns | From Read to next Read | 65 | ||
| CS# Deselect Time | tSHSL | 30 | ns | From Write/Erase/Program to Read Status Register | 65 | ||
| Output Disable Time | tSHQZ | 8 | ns | 65 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | Loading: 30pF | 65 | ||
| Output Hold Time | tCLQX | 0 | ns | 65 | |||
| HOLD# Active Setup Time (relative to SCLK) | tHLCH | 8 | ns | 65 | |||
| HOLD# Active Hold Time (relative to SCLK) | tCHHH | 8 | ns | 65 | |||
| HOLD# Not Active Setup Time (relative to SCLK) | tHHCH | 8 | ns | 65 | |||
| HOLD# Not Active Hold Time (relative to SCLK) | tCHHL | 8 | ns | 65 | |||
| HOLD# to Output Low-Z | tHHQX | 10 | ns | 65 | |||
| HOLD# to Output High-Z | tHLQZ | 10 | ns | 65 | |||
| Write Protect Setup Time | tWHSL | 10 | ns | 65 | |||
| Write Protect Hold Time | tSHWL | 10 | ns | 65 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 65 | |||
| Write Status Register Cycle Time | tW | 9.5 | 20 | ms | 65 | ||
| Byte-Program | tBP | 32 | 100 | us | 66 | ||
| Page Program Cycle Time | tPP | 0.85 | 4 | ms | 66 | ||
| Sector Erase Cycle Time | tSE | 40 | 240 | ms | 66 | ||
| Block Erase (32KB) Cycle Time | tBE32K | 0.24 | 1.5 | s | 66 | ||
| Block Erase (64KB) Cycle Time | tBE | 0.48 | 3 | s | 66 | ||
| Chip Erase Cycle Time | tCE | 13 | 38 | s | 66 | ||
| Power-up: VCC(min.) to device operation | tVSL | 800 | us | 69 | |||
| Write Inhibit Voltage | VWI | 1 | 1.5 | V | 69 | ||
| Minimum duration for ensuring initialization (power-down) | tPWD | 300 | us | 69 |
CAD (KiCad official)
- Symbol:
MX25U1633FZUI - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx25u1633fzui-etched.step/mx25u1633fzui-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25u1633fzui.step/mx25u1633fzui.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (78 pp, sha256
5a0d871efbf35f7d, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).