Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MX25U1633FZUI

MXIC(Macronix) · Pre-ordered Products · USON-8(2x3)

MX25U1633FZUI from MXIC(Macronix), in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; serial access to the device is enabled by CS# input.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O, and serial data input and output (SIO1) for 4 x I/O read mode.
3 WP#/SIO2 bidirectional Write Protection active low, or serial data input and output (SIO2) for 4 x I/O read mode; it has an internal pull-up that is disabled if the pin is physically connected in the system.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O, and serial data input and output (SIO0) for 4 x I/O read mode.
6 SCLK input Clock input.
7 HOLD#/SIO3 bidirectional Pauses the device without deselecting it, or serial data input and output (SIO3) for 4 x I/O read mode; it has an internal pull-up that is disabled if the pin is physically connected in the system.
8 VCC power_in Power Supply.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package USON-8(2x3)
Category Electronic Tools/Instruments/Consumables
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature -40 85 °C Industrial grade 62
Storage Temperature -65 150 °C 62
Applied Input Voltage -0.5 V 62
Applied Output Voltage -0.5 V 62
VCC to Ground Potential -0.5 2.5 V 62
Operating Voltage (VCC) VCC 1.65 2 V For Read, Erase and Program operations 4
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 64
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 64
Leakage Current while WP# at Vhv Iwph 30 uA VCC < 2.1V 64
VCC Standby Current ISB1 9 50 uA VIN = VCC or GND, CS# = VCC 64
Deep Power-down Current ISB2 0.2 2 uA VIN = VCC or GND, CS# = VCC 64
VCC Read ICC1 3.8 6.5 mA f=80MHz; SCLK=0.1VCC/0.9VCC; SO=Open 64
VCC Read (2x I/O) ICC1 4.2 6.5 mA f=80MHz (2x I/O); SCLK=0.1VCC/0.9VCC; SO=Open 64
VCC Read (4x I/O) ICC1 4.2 6.5 mA f=33MHz (4x I/O); SCLK=0.1VCC/0.9VCC; SO=Open 64
VCC Read (4x I/O) ICC1 6.5 9 mA f=80MHz (4x I/O); SCLK=0.1VCC/0.9VCC; SO=Open 64
VCC Program Current (PP) ICC2 5.8 10 mA Program in Progress, CS# = VCC 64
VCC Write Status Register (WRSR) Current ICC3 3.5 10 mA Program status register in progress, CS#=VCC 64
VCC Sector/Block (64K) Erase Current (SE/BE) ICC4 3.5 10 mA Erase in Progress, CS#=VCC 64
VCC Chip Erase Current (CE) ICC5 4 10 mA Erase in Progress, CS#=VCC 64
High Voltage Applied at WP# pin Vhv 7 8 V Test Condition, VCC=2.0V 64
Input Low Voltage VIL -0.5 V 64
Output Low Voltage VOL 0.2 V IOL = 100uA 64
Clock Frequency (fSCLK instructions) fSCLK 80 MHz FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR; min printed as D.C. 65
Clock Frequency for READ instructions fRSCLK 33 MHz 65
Clock Frequency for 2READ/DREAD instructions fTSCLK 80 MHz 65
Clock Frequency for 4READ/QREAD instructions fQ 80 MHz 65
Clock Frequency for 4PP (Quad page program) f4PP 80 MHz 65
Clock High Time (Normal Read) tCH 13 ns Normal Read (fRSCLK) 65
Clock Low Time (Normal Read) tCL 13 ns Normal Read (fRSCLK) 65
Clock Rise Time (peak to peak) tCLCH 0.1 V/ns 65
Clock Fall Time (peak to peak) tCHCL 0.1 V/ns 65
CS# Active Setup Time (relative to SCLK) tSLCH 5 ns 65
CS# Not Active Hold Time (relative to SCLK) tCHSL 5 ns 65
Data In Setup Time tDVCH 2 ns 65
Data In Hold Time tCHDX 3 ns 65
CS# Active Hold Time (relative to SCLK) tCHSH 5 ns 65
CS# Not Active Setup Time (relative to SCLK) tSHCH 5 ns 65
CS# Deselect Time tSHSL 5 ns From Read to next Read 65
CS# Deselect Time tSHSL 30 ns From Write/Erase/Program to Read Status Register 65
Output Disable Time tSHQZ 8 ns 65
Clock Low to Output Valid tCLQV 8 ns Loading: 30pF 65
Output Hold Time tCLQX 0 ns 65
HOLD# Active Setup Time (relative to SCLK) tHLCH 8 ns 65
HOLD# Active Hold Time (relative to SCLK) tCHHH 8 ns 65
HOLD# Not Active Setup Time (relative to SCLK) tHHCH 8 ns 65
HOLD# Not Active Hold Time (relative to SCLK) tCHHL 8 ns 65
HOLD# to Output Low-Z tHHQX 10 ns 65
HOLD# to Output High-Z tHLQZ 10 ns 65
Write Protect Setup Time tWHSL 10 ns 65
Write Protect Hold Time tSHWL 10 ns 65
CS# High to Deep Power-down Mode tDP 10 us 65
Write Status Register Cycle Time tW 9.5 20 ms 65
Byte-Program tBP 32 100 us 66
Page Program Cycle Time tPP 0.85 4 ms 66
Sector Erase Cycle Time tSE 40 240 ms 66
Block Erase (32KB) Cycle Time tBE32K 0.24 1.5 s 66
Block Erase (64KB) Cycle Time tBE 0.48 3 s 66
Chip Erase Cycle Time tCE 13 38 s 66
Power-up: VCC(min.) to device operation tVSL 800 us 69
Write Inhibit Voltage VWI 1 1.5 V 69
Minimum duration for ensuring initialization (power-down) tPWD 300 us 69

CAD (KiCad official)

  • Symbol: MX25U1633FZUI
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: USON-8(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mx25u1633fzui-etched.step / mx25u1633fzui-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25u1633fzui.step / mx25u1633fzui.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (78 pp, sha256 5a0d871efbf35f7d, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF