main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mx25r4035fm1ih1: viewers · Ray
mx25r4035fm1ih1-etched.glb Publish 0.1.0 · Ray
mx25r4035fm1ih1-etched.step mx25r4035fm1ih1: factory component page (tier=lcsc) · Ray
mx25r4035fm1ih1-hero.glb mx25r4035fm1ih1: hero GLB from the etched model (keeps the MPN mark) · Ray
mx25r4035fm1ih1-hero.overlay.json Publish 0.1.0 · Ray
mx25r4035fm1ih1.glb Publish 0.1.0 · Ray
mx25r4035fm1ih1.kicad_mod Publish 0.1.0 · Ray
mx25r4035fm1ih1.kicad_sym Publish 0.1.0 · Ray
mx25r4035fm1ih1.lbr Publish 0.1.0 · Ray
mx25r4035fm1ih1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MX25R4035FM1IH1

MXIC(Macronix) · Pre-ordered Products · SOP-8

MX25R4035FM1IH1 from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; the datasheet gives no further electrical limits for this pin in the text provided.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O mode and Serial Data Input & Output for 4 x I/O read mode.
3 WP#/SIO2 bidirectional Write Protection, active low, or Serial Data Input & Output (SIO2) for 4 x I/O read mode; internal pull-up stays active while the pin is not physically connected.
4 GND power_in Ground reference for the device.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O mode and Serial Data Input & Output (SIO0) for 4 x I/O read mode.
6 SCLK input Clock Input for serial data transfer.
7 HOLD#/SIO3 bidirectional For this ordering code the pin is HOLD#, which pauses the device without deselecting it, or Serial Data Input & Output (SIO3) in 4 x I/O read mode; internal pull-up stays active while not physically connected.
8 VCC power_in Power supply; the device is specified for 1.65V-3.6V.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Electronic Tools/Instruments/Consumables
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Standby Current ISB1 9 40 uA VIN = VCC or GND, CS# = VCC 67
Deep Power-down Current ISB2 0.007 0.35 uA VIN = VCC or GND, CS# = VCC 67
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 67
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 67
Leakage Current while WP# at Vhv Iwph 30 uA VCC < 2.1V 67
VCC Read Current ICC1 4.2 6.7 mA f=108MHz, SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Read Current ICC1 5 8 mA f=104MHz (2x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Read Current ICC1 3.9 6.5 mA f=33MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Read Current ICC1 6.5 9.5 mA f=104MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Program Current (PP) ICC2 5.8 10 mA Program in Progress, CS# = VCC 67
VCC Write Status Register (WRSR) Current ICC3 3.5 10 mA Program status register in progress, CS#=VCC 67
VCC Sector/Block (64K) Erase Current (SE/BE) ICC4 3.5 10 mA Erase in Progress, CS#=VCC 67
VCC Chip Erase Current (CE) ICC5 4 10 mA Erase in Progress, CS#=VCC 67
High Voltage Applied at WP# pin Vhv 7 8 V Test Condition, VCC=2.0V 67
Input Low Voltage VIL -0.5 V 67
Output Low Voltage VOL 0.2 V IOL = 100uA 67
Input Capacitance CIN 6 pF TA = 25°C, f = 1.0 MHz, VIN = 0V 64
Output Capacitance COUT 8 pF TA = 25°C, f = 1.0 MHz, VOUT = 0V 64
Ambient Operating Temperature -40 85 °C Industrial grade 64
Storage Temperature -65 150 °C 64
Applied Input Voltage -0.5 V Maximum listed as VCC+0.5V 64
Applied Output Voltage -0.5 V Maximum listed as VCC+0.5V 64
VCC to Ground Potential MX25R (1.65V-3.6V) -0.5 4 V 64
VCC Operation Voltage VCC 1.65 3.6 V Read, Erase and Program Operations 4
VCC Rise Time tVR 500000 us/V 72
Erase Suspend Latency (HPM) tESL 40 us 71
Program Suspend Latency (HPM) tPSL 40 us 71
Latency between Program Resume and next Suspend tPRS 0.3 us 71
Latency between Erase Resume and next Suspend tERS 0.3 us 71
Byte-Program tBP 32 100 us 71
Byte-Program (Applied Vhv at WP# pin) tBP 32 100 us Applied Vhv at WP# pin 71
Page Program Cycle Time tPP 0.85 4 ms 71
Page Program Cycle Time (Applied Vhv at WP# pin) tPP 0.6 3.6 ms Applied Vhv at WP# pin 71
Sector Erase Cycle Time tSE 40 240 ms 71
Sector Erase Cycle Time (Applied Vhv at WP# pin) tSE 36 210 ms Applied Vhv at WP# pin 71
Block Erase (32KB) Cycle Time tBE32K 0.24 1.5 s 71
Block Erase (32KB) Cycle Time (Applied Vhv at WP# pin) tBE32K 0.22 1.05 s Applied Vhv at WP# pin 71
Block Erase (64KB) Cycle Time tBE 0.48 3 s 71
Block Erase (64KB) Cycle Time (Applied Vhv at WP# pin) tBE 0.43 2.1 s Applied Vhv at WP# pin 71
Chip Erase Cycle Time tCE 3 9 s 71
Chip Erase Cycle Time (Applied Vhv at WP# pin) tCE 2.7 8 s Applied Vhv at WP# pin 71

CAD (KiCad official)

  • Symbol: MX25R4035FM1IH1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25r4035fm1ih1-etched.step / mx25r4035fm1ih1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25r4035fm1ih1.step / mx25r4035fm1ih1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (85 pp, sha256 ac115f6a8ed43b3d, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF