3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25R4035FM1IH1
MXIC(Macronix) · Pre-ordered Products · SOP-8
MX25R4035FM1IH1 from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; the datasheet gives no further electrical limits for this pin in the text provided. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O mode and Serial Data Input & Output for 4 x I/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write Protection, active low, or Serial Data Input & Output (SIO2) for 4 x I/O read mode; internal pull-up stays active while the pin is not physically connected. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O mode and Serial Data Input & Output (SIO0) for 4 x I/O read mode. |
| 6 | SCLK | input | Clock Input for serial data transfer. |
| 7 | HOLD#/SIO3 | bidirectional | For this ordering code the pin is HOLD#, which pauses the device without deselecting it, or Serial Data Input & Output (SIO3) in 4 x I/O read mode; internal pull-up stays active while not physically connected. |
| 8 | VCC | power_in | Power supply; the device is specified for 1.65V-3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Standby Current | ISB1 | 9 | 40 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| Deep Power-down Current | ISB2 | 0.007 | 0.35 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 67 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 67 | |
| Leakage Current while WP# at Vhv | Iwph | 30 | uA | VCC < 2.1V | 67 | ||
| VCC Read Current | ICC1 | 4.2 | 6.7 | mA | f=108MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 5 | 8 | mA | f=104MHz (2x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 3.9 | 6.5 | mA | f=33MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 6.5 | 9.5 | mA | f=104MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Program Current (PP) | ICC2 | 5.8 | 10 | mA | Program in Progress, CS# = VCC | 67 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 3.5 | 10 | mA | Program status register in progress, CS#=VCC | 67 | |
| VCC Sector/Block (64K) Erase Current (SE/BE) | ICC4 | 3.5 | 10 | mA | Erase in Progress, CS#=VCC | 67 | |
| VCC Chip Erase Current (CE) | ICC5 | 4 | 10 | mA | Erase in Progress, CS#=VCC | 67 | |
| High Voltage Applied at WP# pin | Vhv | 7 | 8 | V | Test Condition, VCC=2.0V | 67 | |
| Input Low Voltage | VIL | -0.5 | V | 67 | |||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 67 | ||
| Input Capacitance | CIN | 6 | pF | TA = 25°C, f = 1.0 MHz, VIN = 0V | 64 | ||
| Output Capacitance | COUT | 8 | pF | TA = 25°C, f = 1.0 MHz, VOUT = 0V | 64 | ||
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 64 | ||
| Storage Temperature | -65 | 150 | °C | 64 | |||
| Applied Input Voltage | -0.5 | V | Maximum listed as VCC+0.5V | 64 | |||
| Applied Output Voltage | -0.5 | V | Maximum listed as VCC+0.5V | 64 | |||
| VCC to Ground Potential MX25R (1.65V-3.6V) | -0.5 | 4 | V | 64 | |||
| VCC Operation Voltage | VCC | 1.65 | 3.6 | V | Read, Erase and Program Operations | 4 | |
| VCC Rise Time | tVR | 500000 | us/V | 72 | |||
| Erase Suspend Latency (HPM) | tESL | 40 | us | 71 | |||
| Program Suspend Latency (HPM) | tPSL | 40 | us | 71 | |||
| Latency between Program Resume and next Suspend | tPRS | 0.3 | us | 71 | |||
| Latency between Erase Resume and next Suspend | tERS | 0.3 | us | 71 | |||
| Byte-Program | tBP | 32 | 100 | us | 71 | ||
| Byte-Program (Applied Vhv at WP# pin) | tBP | 32 | 100 | us | Applied Vhv at WP# pin | 71 | |
| Page Program Cycle Time | tPP | 0.85 | 4 | ms | 71 | ||
| Page Program Cycle Time (Applied Vhv at WP# pin) | tPP | 0.6 | 3.6 | ms | Applied Vhv at WP# pin | 71 | |
| Sector Erase Cycle Time | tSE | 40 | 240 | ms | 71 | ||
| Sector Erase Cycle Time (Applied Vhv at WP# pin) | tSE | 36 | 210 | ms | Applied Vhv at WP# pin | 71 | |
| Block Erase (32KB) Cycle Time | tBE32K | 0.24 | 1.5 | s | 71 | ||
| Block Erase (32KB) Cycle Time (Applied Vhv at WP# pin) | tBE32K | 0.22 | 1.05 | s | Applied Vhv at WP# pin | 71 | |
| Block Erase (64KB) Cycle Time | tBE | 0.48 | 3 | s | 71 | ||
| Block Erase (64KB) Cycle Time (Applied Vhv at WP# pin) | tBE | 0.43 | 2.1 | s | Applied Vhv at WP# pin | 71 | |
| Chip Erase Cycle Time | tCE | 3 | 9 | s | 71 | ||
| Chip Erase Cycle Time (Applied Vhv at WP# pin) | tCE | 2.7 | 8 | s | Applied Vhv at WP# pin | 71 |
CAD (KiCad official)
- Symbol:
MX25R4035FM1IH1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25r4035fm1ih1-etched.step/mx25r4035fm1ih1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25r4035fm1ih1.step/mx25r4035fm1ih1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (85 pp, sha256
ac115f6a8ed43b3d, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).