main
Ray
Publish 0.1.0
a9f9cd6
MX25L512EMI-10G
MXIC(Macronix) · NOR FLASH · SOP-8
MX25L512EMI-10G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device is deselected and in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, or serial data input and output in Dual output mode. |
| 3 | WP# | input | Write Protection input. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, or serial data input and output in Dual output mode. |
| 6 | SCLK | input | Serial clock input. |
| 7 | HOLD# | input | Hold input used to pause the device without deselecting it. |
| 8 | VCC | power_in | +3.3V power supply (2.7 to 3.6 V for read, erase and program operations). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 28 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 28 | |
| VCC Standby Current | ISB1 | 15 | 25 | uA | VIN = VCC or GND, CS#=VCC | 28 | |
| Deep Power-down Current | ISB2 | 10 | uA | VIN = VCC or GND, CS#=VCC | 28 | ||
| VCC Read Current | ICC1 | 12 | mA | f=104MHz, fT=80MHz (Dual Output), SCLK=0.1VCC/0.9VCC, SO=Open | 28 | ||
| VCC Read Current | ICC1 | 10 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 28 | ||
| VCC Read Current | ICC1 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 28 | ||
| VCC Program Current (PP) | ICC2 | 15 | 20 | mA | Program in Progress, CS#=VCC | 28 | |
| VCC Write Status Register Current | ICC3 | 15 | mA | Program status register in progress, CS#=VCC | 28 | ||
| VCC Sector Erase Current (SE) | ICC4 | 9 | 15 | mA | Erase in Progress, CS#=VCC | 28 | |
| VCC Chip Erase Current (CE) | ICC5 | 15 | 20 | mA | Erase in Progress, CS#=VCC | 28 | |
| Input Low Voltage | VIL | -0.5 | V | 28 | |||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 28 | ||
| Low VCC Write Inhibit Voltage | VWI | 2.1 | 2.3 | 2.5 | V | 28 | |
| Supply Voltage | VCC | 2.7 | 3.6 | V | Industrial grade | 28 | |
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 26 | ||
| Storage Temperature | -65 | 150 | °C | 26 | |||
| Applied Input Voltage | -0.5 | 4.6 | V | 26 | |||
| Applied Output Voltage | -0.5 | 4.6 | V | 26 | |||
| VCC to Ground Potential | -0.5 | 4.6 | V | 26 | |||
| Input Capacitance | CIN | 6 | pF | VIN = 0V, TA = 25°C, f = 1.0 MHz | 26 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V, TA = 25°C, f = 1.0 MHz | 26 | ||
| Clock Frequency (FAST_READ etc.) | fSCLK | 0 | 104 | MHz | 29 | ||
| Clock Frequency for READ | fRSCLK | 0 | 33 | MHz | 29 | ||
| Clock Frequency for DREAD | fTSCLK | 0 | 80 | MHz | 29 | ||
| Clock High Time | tCH | 13 | ns | @33MHz | 29 | ||
| Clock High Time | tCH | 4.7 | ns | @104MHz | 29 | ||
| Clock Low Time | tCL | 13 | ns | @33MHz | 29 | ||
| Clock Low Time | tCL | 4.7 | ns | @104MHz | 29 | ||
| CS# Active Setup Time | tSLCH | 7 | ns | 29 | |||
| Data In Setup Time | tDVCH | 2 | ns | 29 | |||
| Data In Hold Time | tCHDX | 5 | ns | 29 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | 30pF | 29 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | 15pF | 29 | ||
| Page Program Cycle Time | tPP | 0.6 | 3 | ms | 29 | ||
| Sector Erase Cycle Time | tSE | 40 | 200 | ms | 29 | ||
| Chip Erase Cycle Time | tCE | 0.4 | 2 | s | 29 | ||
| VCC(min) to CS# low | tVSL | 200 | us | 30 | |||
| VCC Rise Time | tVR | 500000 | us/V | 40 |
CAD (KiCad official)
- Symbol:
MX25L512EMI-10G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25l512emi-10g-etched.step/mx25l512emi-10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l512emi-10g.step/mx25l512emi-10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (49 pp, sha256
f346b4282d828254, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX25L512EMI-10G
**MXIC(Macronix)** · NOR FLASH · SOP-8
MX25L512EMI-10G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device is deselected and in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, or serial data input and output in Dual output mode. |
| 3 | WP# | input | Write Protection input. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, or serial data input and output in Dual output mode. |
| 6 | SCLK | input | Serial clock input. |
| 7 | HOLD# | input | Hold input used to pause the device without deselecting it. |
| 8 | VCC | power_in | +3.3V power supply (2.7 to 3.6 V for read, erase and program operations). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 28 |
| Output Leakage Current | ILO | -2 | | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 28 |
| VCC Standby Current | ISB1 | | 15 | 25 | uA | VIN = VCC or GND, CS#=VCC | 28 |
| Deep Power-down Current | ISB2 | | 10 | | uA | VIN = VCC or GND, CS#=VCC | 28 |
| VCC Read Current | ICC1 | | | 12 | mA | f=104MHz, fT=80MHz (Dual Output), SCLK=0.1VCC/0.9VCC, SO=Open | 28 |
| VCC Read Current | ICC1 | | | 10 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 28 |
| VCC Read Current | ICC1 | | | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 28 |
| VCC Program Current (PP) | ICC2 | | 15 | 20 | mA | Program in Progress, CS#=VCC | 28 |
| VCC Write Status Register Current | ICC3 | | | 15 | mA | Program status register in progress, CS#=VCC | 28 |
| VCC Sector Erase Current (SE) | ICC4 | | 9 | 15 | mA | Erase in Progress, CS#=VCC | 28 |
| VCC Chip Erase Current (CE) | ICC5 | | 15 | 20 | mA | Erase in Progress, CS#=VCC | 28 |
| Input Low Voltage | VIL | -0.5 | | | V | | 28 |
| Output Low Voltage | VOL | | | 0.4 | V | IOL = 1.6mA | 28 |
| Low VCC Write Inhibit Voltage | VWI | 2.1 | 2.3 | 2.5 | V | | 28 |
| Supply Voltage | VCC | 2.7 | | 3.6 | V | Industrial grade | 28 |
| Ambient Operating Temperature | | -40 | | 85 | °C | Industrial grade | 26 |
| Storage Temperature | | -65 | | 150 | °C | | 26 |
| Applied Input Voltage | | -0.5 | | 4.6 | V | | 26 |
| Applied Output Voltage | | -0.5 | | 4.6 | V | | 26 |
| VCC to Ground Potential | | -0.5 | | 4.6 | V | | 26 |
| Input Capacitance | CIN | | | 6 | pF | VIN = 0V, TA = 25°C, f = 1.0 MHz | 26 |
| Output Capacitance | COUT | | | 8 | pF | VOUT = 0V, TA = 25°C, f = 1.0 MHz | 26 |
| Clock Frequency (FAST_READ etc.) | fSCLK | 0 | | 104 | MHz | | 29 |
| Clock Frequency for READ | fRSCLK | 0 | | 33 | MHz | | 29 |
| Clock Frequency for DREAD | fTSCLK | 0 | | 80 | MHz | | 29 |
| Clock High Time | tCH | 13 | | | ns | @33MHz | 29 |
| Clock High Time | tCH | 4.7 | | | ns | @104MHz | 29 |
| Clock Low Time | tCL | 13 | | | ns | @33MHz | 29 |
| Clock Low Time | tCL | 4.7 | | | ns | @104MHz | 29 |
| CS# Active Setup Time | tSLCH | 7 | | | ns | | 29 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 29 |
| Data In Hold Time | tCHDX | 5 | | | ns | | 29 |
| Clock Low to Output Valid | tCLQV | | | 8 | ns | 30pF | 29 |
| Clock Low to Output Valid | tCLQV | | | 6 | ns | 15pF | 29 |
| Page Program Cycle Time | tPP | | 0.6 | 3 | ms | | 29 |
| Sector Erase Cycle Time | tSE | | 40 | 200 | ms | | 29 |
| Chip Erase Cycle Time | tCE | | 0.4 | 2 | s | | 29 |
| VCC(min) to CS# low | tVSL | 200 | | | us | | 30 |
| VCC Rise Time | tVR | | | 500000 | us/V | | 40 |
## CAD (KiCad official)
- Symbol: `MX25L512EMI-10G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mx25l512emi-10g-etched.step` / `mx25l512emi-10g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx25l512emi-10g.step` / `mx25l512emi-10g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](docs/mx25l512emi-10g-datasheet.pdf) (49 pp, sha256 `f346b4282d828254`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx25l512emi-10g-datasheet.pdf)