Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MX25L512EMI-10G

MXIC(Macronix) · NOR FLASH · SOP-8

MX25L512EMI-10G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input that enables serial access to the device; when high the device is deselected and in standby mode.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O, or serial data input and output in Dual output mode.
3 WP# input Write Protection input.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O, or serial data input and output in Dual output mode.
6 SCLK input Serial clock input.
7 HOLD# input Hold input used to pause the device without deselecting it.
8 VCC power_in +3.3V power supply (2.7 to 3.6 V for read, erase and program operations).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 28
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 28
VCC Standby Current ISB1 15 25 uA VIN = VCC or GND, CS#=VCC 28
Deep Power-down Current ISB2 10 uA VIN = VCC or GND, CS#=VCC 28
VCC Read Current ICC1 12 mA f=104MHz, fT=80MHz (Dual Output), SCLK=0.1VCC/0.9VCC, SO=Open 28
VCC Read Current ICC1 10 mA f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open 28
VCC Read Current ICC1 4 mA f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open 28
VCC Program Current (PP) ICC2 15 20 mA Program in Progress, CS#=VCC 28
VCC Write Status Register Current ICC3 15 mA Program status register in progress, CS#=VCC 28
VCC Sector Erase Current (SE) ICC4 9 15 mA Erase in Progress, CS#=VCC 28
VCC Chip Erase Current (CE) ICC5 15 20 mA Erase in Progress, CS#=VCC 28
Input Low Voltage VIL -0.5 V 28
Output Low Voltage VOL 0.4 V IOL = 1.6mA 28
Low VCC Write Inhibit Voltage VWI 2.1 2.3 2.5 V 28
Supply Voltage VCC 2.7 3.6 V Industrial grade 28
Ambient Operating Temperature -40 85 °C Industrial grade 26
Storage Temperature -65 150 °C 26
Applied Input Voltage -0.5 4.6 V 26
Applied Output Voltage -0.5 4.6 V 26
VCC to Ground Potential -0.5 4.6 V 26
Input Capacitance CIN 6 pF VIN = 0V, TA = 25°C, f = 1.0 MHz 26
Output Capacitance COUT 8 pF VOUT = 0V, TA = 25°C, f = 1.0 MHz 26
Clock Frequency (FAST_READ etc.) fSCLK 0 104 MHz 29
Clock Frequency for READ fRSCLK 0 33 MHz 29
Clock Frequency for DREAD fTSCLK 0 80 MHz 29
Clock High Time tCH 13 ns @33MHz 29
Clock High Time tCH 4.7 ns @104MHz 29
Clock Low Time tCL 13 ns @33MHz 29
Clock Low Time tCL 4.7 ns @104MHz 29
CS# Active Setup Time tSLCH 7 ns 29
Data In Setup Time tDVCH 2 ns 29
Data In Hold Time tCHDX 5 ns 29
Clock Low to Output Valid tCLQV 8 ns 30pF 29
Clock Low to Output Valid tCLQV 6 ns 15pF 29
Page Program Cycle Time tPP 0.6 3 ms 29
Sector Erase Cycle Time tSE 40 200 ms 29
Chip Erase Cycle Time tCE 0.4 2 s 29
VCC(min) to CS# low tVSL 200 us 30
VCC Rise Time tVR 500000 us/V 40

CAD (KiCad official)

  • Symbol: MX25L512EMI-10G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25l512emi-10g-etched.step / mx25l512emi-10g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l512emi-10g.step / mx25l512emi-10g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (49 pp, sha256 f346b4282d828254, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF