main
Ray Publish 0.1.0 ec85666

MX25L4006EM1I-12GTR

MXIC(Macronix) · NOR FLASH · SOP-8

MX25L4006EM1I-12GTR from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; serial access to the device is enabled by CS#, and the device enters standby mode when CS# is high and the device is not in operation.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O mode, and Serial Data Output (SIO1) for Dual Output mode.
3 WP# input Write Protection input for the device's write-protection function.
4 GND power_in Ground reference for the device.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O mode, and Serial Data Input & Output (SIO0) for Dual Output mode.
6 SCLK input Clock Input for the serial interface, supporting SPI Mode 0 and Mode 3 with an 86MHz serial clock.
7 HOLD# input Hold input, used to pause the device without deselecting the device.
8 VCC power_in Power supply pin, labelled +3.3V; the device is specified for a 2.7 to 3.6 volt supply for read, erase, and program operations.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -55 125 °C 27
Applied Input Voltage -0.5 4.6 V 27
Applied Output Voltage -0.5 4.6 V 27
VCC to Ground Potential -0.5 4.6 V 27
Input voltage with respect to GND on all power pins, SI, CS# -1 V 44
Input voltage with respect to GND on SO -1 V 44
Latch-up current -100 100 mA Includes all pins except VCC; VCC = 3.0V, one pin at a time 44
Ambient Operating Temperature, Industrial (I) grade -40 85 °C Industrial (I) grade 27
Supply voltage VCC 2.7 3.6 V Temperature -40°C to 85°C 29
Input Load Current ILI -2 2 uA VCC = VCC Max; VIN = VCC or GND 29
Output Leakage Current ILO -2 2 uA VCC = VCC Max; VOUT = VCC or GND 29
VCC Standby Current ISB1 15 25 uA VIN = VCC or GND; CS# = VCC 29
VCC Read Current ICC1 12 mA f=86MHz; SCLK=0.1VCC/0.9VCC; SO=Open 29
VCC Read Current ICC1 4 mA f=33MHz; SCLK=0.1VCC/0.9VCC; SO=Open 29
VCC Program Current (PP) ICC2 15 20 mA Program in Progress; CS# = VCC 29
VCC Write Status Register (WRSR) Current ICC3 15 mA Program status register in progress; CS# = VCC 29
VCC Sector Erase Current (SE) ICC4 9 15 mA Erase in Progress; CS# = VCC 29
VCC Chip Erase Current (CE) ICC5 15 20 mA Erase in Progress; CS# = VCC 29
Input Low Voltage VIL -0.5 V 29
Output Low Voltage VOL 0.4 V IOL = 1.6mA 29
Low VCC Write Inhibit Voltage VWI 2.1 2.3 2.5 V 29
Clock Frequency for FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR fSCLK 86 MHz 30
Clock Frequency for READ instructions fRSCLK 33 MHz 30
Clock Frequency for DREAD instructions fTSCLK 80 MHz 30
Clock High Time tCH 13 ns @33MHz 30
Clock High Time tCH 5.5 ns @86MHz 30
Clock Low Time tCL 13 ns @33MHz 30
Clock Low Time tCL 5.5 ns @86MHz 30
CS# Active Setup Time (relative to SCLK) tSLCH 7 ns 30
CS# Not Active Hold Time (relative to SCLK) tCHSL 7 ns 30
Data In Setup Time tDVCH 2 ns 30
Data In Hold Time tCHDX 5 ns 30
CS# Active Hold Time (relative to SCLK) tCHSH 7 ns 30
CS# Not Active Setup Time (relative to SCLK) tSHCH 7 ns 30
CS# Deselect Time tSHSL 15 ns Read 30
CS# Deselect Time tSHSL 40 ns Write 30
Output Disable Time tSHQZ 6 ns 30
Clock Low to Output Valid tCLQV 8 ns 30pF 30
Clock Low to Output Valid tCLQV 6 ns 15pF 30
HOLD# Setup Time (relative to SCLK) tHLCH 5 ns 30
HOLD# Hold Time (relative to SCLK) tCHHH 5 ns 30
HOLD Setup Time (relative to SCLK) tHHCH 5 ns 30
HOLD Hold Time (relative to SCLK) tCHHL 5 ns 30
Output Hold Time tCLQX 0 ns 30
HOLD to Output Low-Z tHHQX 6 ns 30
HOLD# to Output High-Z tHLQZ 6 ns 30
Write Protect Setup Time tWHSL 20 ns Only for WRSR when SRWD=1 30
Write Protect Hold Time tSHWL 100 ns Only for WRSR when SRWD=1 30
CS# High to Deep Power-down Mode tDP 10 us 30
CS# High to Standby Mode without Electronic Signature Read tRES1 8.8 us 30
CS# High to Standby Mode with Electronic Signature Read tRES2 8.8 us 30
Write Status Register Cycle Time tW 5 40 ms 30
Byte-Program Time tBP 9 50 us 30
Page Program Cycle Time tPP 0.6 3 ms 30
Sector Erase Cycle Time tSE 40 200 ms 30
Block Erase Cycle Time tBE 0.4 2 s 30
Chip Erase Cycle Time tCE 1.7 4 s 30
VCC(min) to CS# low tVSL 200 us 31
VCC Rise Time tVR 1 500000 us/V 42

CAD (KiCad official)

  • Symbol: MX25L4006EM1I-12GTR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25l4006em1i-12gtr-etched.step / mx25l4006em1i-12gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l4006em1i-12gtr.step / mx25l4006em1i-12gtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (53 pp, sha256 4bdea1f63dc56f39, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF