3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25L4006EM1I-12GTR
MXIC(Macronix) · NOR FLASH · SOP-8
MX25L4006EM1I-12GTR from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; serial access to the device is enabled by CS#, and the device enters standby mode when CS# is high and the device is not in operation. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O mode, and Serial Data Output (SIO1) for Dual Output mode. |
| 3 | WP# | input | Write Protection input for the device's write-protection function. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O mode, and Serial Data Input & Output (SIO0) for Dual Output mode. |
| 6 | SCLK | input | Clock Input for the serial interface, supporting SPI Mode 0 and Mode 3 with an 86MHz serial clock. |
| 7 | HOLD# | input | Hold input, used to pause the device without deselecting the device. |
| 8 | VCC | power_in | Power supply pin, labelled +3.3V; the device is specified for a 2.7 to 3.6 volt supply for read, erase, and program operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -55 | 125 | °C | 27 | |||
| Applied Input Voltage | -0.5 | 4.6 | V | 27 | |||
| Applied Output Voltage | -0.5 | 4.6 | V | 27 | |||
| VCC to Ground Potential | -0.5 | 4.6 | V | 27 | |||
| Input voltage with respect to GND on all power pins, SI, CS# | -1 | V | 44 | ||||
| Input voltage with respect to GND on SO | -1 | V | 44 | ||||
| Latch-up current | -100 | 100 | mA | Includes all pins except VCC; VCC = 3.0V, one pin at a time | 44 | ||
| Ambient Operating Temperature, Industrial (I) grade | -40 | 85 | °C | Industrial (I) grade | 27 | ||
| Supply voltage | VCC | 2.7 | 3.6 | V | Temperature -40°C to 85°C | 29 | |
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max; VIN = VCC or GND | 29 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max; VOUT = VCC or GND | 29 | |
| VCC Standby Current | ISB1 | 15 | 25 | uA | VIN = VCC or GND; CS# = VCC | 29 | |
| VCC Read Current | ICC1 | 12 | mA | f=86MHz; SCLK=0.1VCC/0.9VCC; SO=Open | 29 | ||
| VCC Read Current | ICC1 | 4 | mA | f=33MHz; SCLK=0.1VCC/0.9VCC; SO=Open | 29 | ||
| VCC Program Current (PP) | ICC2 | 15 | 20 | mA | Program in Progress; CS# = VCC | 29 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 15 | mA | Program status register in progress; CS# = VCC | 29 | ||
| VCC Sector Erase Current (SE) | ICC4 | 9 | 15 | mA | Erase in Progress; CS# = VCC | 29 | |
| VCC Chip Erase Current (CE) | ICC5 | 15 | 20 | mA | Erase in Progress; CS# = VCC | 29 | |
| Input Low Voltage | VIL | -0.5 | V | 29 | |||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 29 | ||
| Low VCC Write Inhibit Voltage | VWI | 2.1 | 2.3 | 2.5 | V | 29 | |
| Clock Frequency for FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 86 | MHz | 30 | |||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | 30 | |||
| Clock Frequency for DREAD instructions | fTSCLK | 80 | MHz | 30 | |||
| Clock High Time | tCH | 13 | ns | @33MHz | 30 | ||
| Clock High Time | tCH | 5.5 | ns | @86MHz | 30 | ||
| Clock Low Time | tCL | 13 | ns | @33MHz | 30 | ||
| Clock Low Time | tCL | 5.5 | ns | @86MHz | 30 | ||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 7 | ns | 30 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 7 | ns | 30 | |||
| Data In Setup Time | tDVCH | 2 | ns | 30 | |||
| Data In Hold Time | tCHDX | 5 | ns | 30 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 7 | ns | 30 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 7 | ns | 30 | |||
| CS# Deselect Time | tSHSL | 15 | ns | Read | 30 | ||
| CS# Deselect Time | tSHSL | 40 | ns | Write | 30 | ||
| Output Disable Time | tSHQZ | 6 | ns | 30 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | 30pF | 30 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | 15pF | 30 | ||
| HOLD# Setup Time (relative to SCLK) | tHLCH | 5 | ns | 30 | |||
| HOLD# Hold Time (relative to SCLK) | tCHHH | 5 | ns | 30 | |||
| HOLD Setup Time (relative to SCLK) | tHHCH | 5 | ns | 30 | |||
| HOLD Hold Time (relative to SCLK) | tCHHL | 5 | ns | 30 | |||
| Output Hold Time | tCLQX | 0 | ns | 30 | |||
| HOLD to Output Low-Z | tHHQX | 6 | ns | 30 | |||
| HOLD# to Output High-Z | tHLQZ | 6 | ns | 30 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | Only for WRSR when SRWD=1 | 30 | ||
| Write Protect Hold Time | tSHWL | 100 | ns | Only for WRSR when SRWD=1 | 30 | ||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 30 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 8.8 | us | 30 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 8.8 | us | 30 | |||
| Write Status Register Cycle Time | tW | 5 | 40 | ms | 30 | ||
| Byte-Program Time | tBP | 9 | 50 | us | 30 | ||
| Page Program Cycle Time | tPP | 0.6 | 3 | ms | 30 | ||
| Sector Erase Cycle Time | tSE | 40 | 200 | ms | 30 | ||
| Block Erase Cycle Time | tBE | 0.4 | 2 | s | 30 | ||
| Chip Erase Cycle Time | tCE | 1.7 | 4 | s | 30 | ||
| VCC(min) to CS# low | tVSL | 200 | us | 31 | |||
| VCC Rise Time | tVR | 1 | 500000 | us/V | 42 |
CAD (KiCad official)
- Symbol:
MX25L4006EM1I-12GTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25l4006em1i-12gtr-etched.step/mx25l4006em1i-12gtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l4006em1i-12gtr.step/mx25l4006em1i-12gtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (53 pp, sha256
4bdea1f63dc56f39, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).