main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mx25l3233fmi-08g: viewers · Ray
mx25l3233fmi-08g-etched.glb Publish 0.1.0 · Ray
mx25l3233fmi-08g-etched.step mx25l3233fmi-08g: factory component page (tier=lcsc) · Ray
mx25l3233fmi-08g-hero.glb mx25l3233fmi-08g: hero GLB from the etched model (keeps the MPN mark) · Ray
mx25l3233fmi-08g-hero.overlay.json Publish 0.1.0 · Ray
mx25l3233fmi-08g.glb Publish 0.1.0 · Ray
mx25l3233fmi-08g.kicad_mod Publish 0.1.0 · Ray
mx25l3233fmi-08g.kicad_sym Publish 0.1.0 · Ray
mx25l3233fmi-08g.lbr Publish 0.1.0 · Ray
mx25l3233fmi-08g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

MX25L3233FMI-08G

MXIC(Macronix) · Pre-ordered Products · SOIC-16-300mil

MX25L3233FMI-08G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HOLD#/SIO3 bidirectional Pauses the device without deselecting it, or serves as serial data input/output SIO3 in 4xI/O mode (internal pull-up when not connected).
2 VCC power_in +3.0V power supply.
3 NC unconnected No connection.
4 NC unconnected No connection.
5 NC unconnected No connection.
6 NC unconnected No connection.
7 CS# input Chip select input that enables serial access to the device; the device stays in standby when CS# is high and not in operation.
8 SO/SIO1 bidirectional Serial data output in 1xI/O, or serial data input and output in 2xI/O and 4xI/O modes.
9 WP#/SIO2 bidirectional Active-low write protection input, or serial data input and output SIO2 in 4xI/O mode (internal pull-up when not connected).
10 GND power_in Ground.
11 NC unconnected No connection.
12 NC unconnected No connection.
13 NC unconnected No connection.
14 NC unconnected No connection.
15 SI/SIO0 bidirectional Serial data input in 1xI/O, or serial data input and output in 2xI/O and 4xI/O modes.
16 SCLK input Serial clock input.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOIC-16-300mil
Category Electronic Tools/Instruments/Consumables
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 67
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 67
VCC Standby Current ISB1 10 50 uA VIN = VCC or GND, CS# = VCC 67
Deep Power-down Current ISB2 3 20 uA VIN = VCC or GND, CS# = VCC 67
VCC Read Current ICC1 2.5 5 mA f=50MHz, SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Read Current (4 x I/O) ICC1 10 17 mA fQ=133MHz (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open 67
VCC Program Current (PP) ICC2 10 15 mA Program in Progress, CS# = VCC 67
VCC Write Status Register Current ICC3 10 15 mA Program status register in progress, CS#=VCC 67
VCC Sector Erase Current ICC4 10 15 mA Erase in Progress, CS#=VCC 67
VCC Chip Erase Current ICC5 10 15 mA Erase in Progress, CS#=VCC 67
Input Low Voltage VIL -0.5 0.8 V 67
Output Low Voltage VOL 0.4 V IOL = 1.6mA 67
VCC Power Supply VCC 2.65 3.6 V 74
Ambient Operating Temperature -40 85 °C Industrial grade 65
Storage Temperature -65 150 °C 65
Applied Input Voltage -0.5 4.6 V 65
Applied Output Voltage -0.5 4.6 V 65
VCC to Ground Potential -0.5 4.6 V 65
Input Capacitance CIN 6 pF VIN = 0V; TA = 25°C, f = 1.0 MHz 65
Output Capacitance COUT 8 pF VOUT = 0V; TA = 25°C, f = 1.0 MHz 65
Clock Frequency (FAST_READ, PP, SE, etc.) fSCLK 133 MHz 68
Clock Frequency for READ fRSCLK 50 MHz 68
VCC Rise Time tVR 500000 us/V 72
VCC(min.) to device operation tVSL 800 us 74
Write Inhibit Voltage VWI 1.5 2.5 V 74
Page Program Cycle Time tPP 0.33 1.2 ms 69
Sector Erase Cycle Time (4KB) tSE 25 200 ms 69
Block Erase Cycle Time (64KB) tBE 0.25 1 s 69
Chip Erase Cycle Time tCE 10 30 s 69
Erase/Program Cycle 100000 cycles 75

CAD (KiCad official)

  • Symbol: MX25L3233FMI-08G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: mx25l3233fmi-08g-etched.step / mx25l3233fmi-08g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l3233fmi-08g.step / mx25l3233fmi-08g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (86 pp, sha256 48c831d2dc0d30a6, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF