3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25L3233FMI-08G
MXIC(Macronix) · Pre-ordered Products · SOIC-16-300mil
MX25L3233FMI-08G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HOLD#/SIO3 | bidirectional | Pauses the device without deselecting it, or serves as serial data input/output SIO3 in 4xI/O mode (internal pull-up when not connected). |
| 2 | VCC | power_in | +3.0V power supply. |
| 3 | NC | unconnected | No connection. |
| 4 | NC | unconnected | No connection. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | CS# | input | Chip select input that enables serial access to the device; the device stays in standby when CS# is high and not in operation. |
| 8 | SO/SIO1 | bidirectional | Serial data output in 1xI/O, or serial data input and output in 2xI/O and 4xI/O modes. |
| 9 | WP#/SIO2 | bidirectional | Active-low write protection input, or serial data input and output SIO2 in 4xI/O mode (internal pull-up when not connected). |
| 10 | GND | power_in | Ground. |
| 11 | NC | unconnected | No connection. |
| 12 | NC | unconnected | No connection. |
| 13 | NC | unconnected | No connection. |
| 14 | NC | unconnected | No connection. |
| 15 | SI/SIO0 | bidirectional | Serial data input in 1xI/O, or serial data input and output in 2xI/O and 4xI/O modes. |
| 16 | SCLK | input | Serial clock input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOIC-16-300mil |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 67 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 67 | |
| VCC Standby Current | ISB1 | 10 | 50 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| Deep Power-down Current | ISB2 | 3 | 20 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| VCC Read Current | ICC1 | 2.5 | 5 | mA | f=50MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current (4 x I/O) | ICC1 | 10 | 17 | mA | fQ=133MHz (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Program Current (PP) | ICC2 | 10 | 15 | mA | Program in Progress, CS# = VCC | 67 | |
| VCC Write Status Register Current | ICC3 | 10 | 15 | mA | Program status register in progress, CS#=VCC | 67 | |
| VCC Sector Erase Current | ICC4 | 10 | 15 | mA | Erase in Progress, CS#=VCC | 67 | |
| VCC Chip Erase Current | ICC5 | 10 | 15 | mA | Erase in Progress, CS#=VCC | 67 | |
| Input Low Voltage | VIL | -0.5 | 0.8 | V | 67 | ||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 67 | ||
| VCC Power Supply | VCC | 2.65 | 3.6 | V | 74 | ||
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 65 | ||
| Storage Temperature | -65 | 150 | °C | 65 | |||
| Applied Input Voltage | -0.5 | 4.6 | V | 65 | |||
| Applied Output Voltage | -0.5 | 4.6 | V | 65 | |||
| VCC to Ground Potential | -0.5 | 4.6 | V | 65 | |||
| Input Capacitance | CIN | 6 | pF | VIN = 0V; TA = 25°C, f = 1.0 MHz | 65 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V; TA = 25°C, f = 1.0 MHz | 65 | ||
| Clock Frequency (FAST_READ, PP, SE, etc.) | fSCLK | 133 | MHz | 68 | |||
| Clock Frequency for READ | fRSCLK | 50 | MHz | 68 | |||
| VCC Rise Time | tVR | 500000 | us/V | 72 | |||
| VCC(min.) to device operation | tVSL | 800 | us | 74 | |||
| Write Inhibit Voltage | VWI | 1.5 | 2.5 | V | 74 | ||
| Page Program Cycle Time | tPP | 0.33 | 1.2 | ms | 69 | ||
| Sector Erase Cycle Time (4KB) | tSE | 25 | 200 | ms | 69 | ||
| Block Erase Cycle Time (64KB) | tBE | 0.25 | 1 | s | 69 | ||
| Chip Erase Cycle Time | tCE | 10 | 30 | s | 69 | ||
| Erase/Program Cycle | 100000 | cycles | 75 |
CAD (KiCad official)
- Symbol:
MX25L3233FMI-08G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mx25l3233fmi-08g-etched.step/mx25l3233fmi-08g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l3233fmi-08g.step/mx25l3233fmi-08g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (86 pp, sha256
48c831d2dc0d30a6, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).