main
Ray Publish 0.1.0 40675ab

MX25L25645GMI-10G

MXIC(Macronix) · NOR FLASH · SOIC-16-300mil

MX25L25645GMI-10G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC/SIO3 bidirectional No connection or serial data input/output SIO3 for 4xI/O read mode (SIO3 function when QE=1).
2 VCC power_in +3V power supply (2.7V-3.6V operating range).
3 RESET# input Hardware reset pin, active low; has an internal pull-up that is disabled if the pin is physically connected in the system.
4 NC unconnected No connection.
5 NC unconnected No connection.
6 NC unconnected No connection.
7 CS# input Chip select; enables serial access to the device, and the device goes to standby mode when CS# is high.
8 SO/SIO1 bidirectional Serial data output for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode.
9 WP#/SIO2 bidirectional Write protection, active low, or serial data input and output for 4xI/O read mode; has an internal pull-up when not physically connected.
10 GND power_in Ground.
11 NC unconnected No connection.
12 NC unconnected No connection.
13 NC unconnected No connection.
14 NC unconnected No connection.
15 SI/SIO0 bidirectional Serial data input for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode.
16 SCLK input Serial clock input (up to 133MHz).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOIC-16-300mil
Category Memory
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 105
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 105
VCC Standby Current ISB1 15 100 uA VIN = VCC or GND, CS# = VCC 105
Deep Power-down Current ISB2 20 uA VIN = VCC or GND, CS# = VCC 105
VCC Read Current ICC1 16 30 mA f=100MHz, (DTR 4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open 105
VCC Read Current ICC1 14 25 mA f=133MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open 105
VCC Read Current ICC1 12 20 mA f=104MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open 105
VCC Read Current ICC1 12 15 mA f=84MHz, SCLK=0.1VCC/0.9VCC, SO=Open 105
VCC Program Current (PP) ICC2 12 25 mA Program in Progress, CS# = VCC 105
VCC Write Status Register Current ICC3 10 12 mA Program status register in progress, CS#=VCC 105
VCC Sector/Block Erase Current ICC4 10 25 mA Erase in Progress, CS#=VCC 105
VCC Chip Erase Current ICC5 14 25 mA Erase in Progress, CS#=VCC 105
Input Low Voltage VIL -0.5 0.8 V 105
Output Low Voltage VOL 0.2 V IOL = 100uA 105
VCC to Ground Potential -0.5 4 V 103
Storage Temperature -65 150 °C 103
Ambient Operating Temperature -40 85 °C Industrial grade 103
Supply Voltage VCC 2.7 3.6 V read, erase, and program operations 105
Input Capacitance CIN 8 pF VIN = 0V 103
Output Capacitance COUT 10 pF VOUT = 0V 103
Clock Frequency for all commands (except Read) fSCLK 120 MHz 106
Clock Frequency for READ instructions fRSCLK 50 MHz 106
Clock Frequency for 2READ/DREAD fTSCLK 80 MHz 106
Clock Frequency for 4READ/QREAD fQ 80 MHz 106
Clock High Time tCH 7 ns Others (fSCLK) ≤ 66MHz 106
Clock Low Time tCL 7 ns Others (fSCLK) ≤ 66MHz 106
CS# Active Setup Time tSLCH 3 ns 106
CS# Not Active Hold Time tCHSL 3 ns 106
Data In Setup Time tDVCH/tDVCL 2 ns 106
Data In Hold Time tCHDX/tCLDX 2 ns 106
CS# Deselect Time tSHSL 7 ns From Read to next Read 106
CS# Deselect Time tSHSL 30 ns From Write/Erase/Program to Read Status Register 106
Output Disable Time tSHQZ 8 ns 106
Clock Low to Output Valid tCLQV 8 ns Loading: 30pF 106
Clock Low to Output Valid tCLQV 6 ns Loading: 15pF 106
Output Hold Time tCLQX 1 ns Loading: 30pF 106
CS# High to Deep Power-down Mode tDP 10 us 106
CS# High to Standby Mode without Electronic Signature Read tRES1 30 us 106
CS# High to Standby Mode with Electronic Signature Read tRES2 30 us 106
Write Status/Configuration Register Cycle Time tW 40 ms 106
Byte-Program tBP 15 30 us 106
Page Program Cycle Time tPP 0.25 0.75 ms 106
Sector Erase Cycle Time tSE 30 400 ms 106
Block Erase (32KB) Cycle Time tBE32 180 1000 ms 106
Block Erase (64KB) Cycle Time tBE 380 2000 ms 106
Chip Erase Cycle Time tCE 110 210 s 106
Erase Suspend Latency tESL 25 us 106
Program Suspend Latency tPSL 25 us 106
VCC Rise Time tVR 500000 us/V Sampled, not 100% tested 108
Data retention 20 years 55˚C 112
Erase/Program Cycle 100000 cycles 111

CAD (KiCad official)

  • Symbol: MX25L25645GMI-10G
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: mx25l25645gmi-10g-etched.step / mx25l25645gmi-10g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l25645gmi-10g.step / mx25l25645gmi-10g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (123 pp, sha256 718f67d89d8e3080, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF