Generated by kicad-footprint-generator · KiCad file format 20260206
MX25L25645GMI-10G
MXIC(Macronix) · NOR FLASH · SOIC-16-300mil
MX25L25645GMI-10G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC/SIO3 | bidirectional | No connection or serial data input/output SIO3 for 4xI/O read mode (SIO3 function when QE=1). |
| 2 | VCC | power_in | +3V power supply (2.7V-3.6V operating range). |
| 3 | RESET# | input | Hardware reset pin, active low; has an internal pull-up that is disabled if the pin is physically connected in the system. |
| 4 | NC | unconnected | No connection. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | CS# | input | Chip select; enables serial access to the device, and the device goes to standby mode when CS# is high. |
| 8 | SO/SIO1 | bidirectional | Serial data output for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode. |
| 9 | WP#/SIO2 | bidirectional | Write protection, active low, or serial data input and output for 4xI/O read mode; has an internal pull-up when not physically connected. |
| 10 | GND | power_in | Ground. |
| 11 | NC | unconnected | No connection. |
| 12 | NC | unconnected | No connection. |
| 13 | NC | unconnected | No connection. |
| 14 | NC | unconnected | No connection. |
| 15 | SI/SIO0 | bidirectional | Serial data input for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode. |
| 16 | SCLK | input | Serial clock input (up to 133MHz). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOIC-16-300mil |
| Category | Memory |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 105 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 105 | |
| VCC Standby Current | ISB1 | 15 | 100 | uA | VIN = VCC or GND, CS# = VCC | 105 | |
| Deep Power-down Current | ISB2 | 20 | uA | VIN = VCC or GND, CS# = VCC | 105 | ||
| VCC Read Current | ICC1 | 16 | 30 | mA | f=100MHz, (DTR 4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 105 | |
| VCC Read Current | ICC1 | 14 | 25 | mA | f=133MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 105 | |
| VCC Read Current | ICC1 | 12 | 20 | mA | f=104MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 105 | |
| VCC Read Current | ICC1 | 12 | 15 | mA | f=84MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 105 | |
| VCC Program Current (PP) | ICC2 | 12 | 25 | mA | Program in Progress, CS# = VCC | 105 | |
| VCC Write Status Register Current | ICC3 | 10 | 12 | mA | Program status register in progress, CS#=VCC | 105 | |
| VCC Sector/Block Erase Current | ICC4 | 10 | 25 | mA | Erase in Progress, CS#=VCC | 105 | |
| VCC Chip Erase Current | ICC5 | 14 | 25 | mA | Erase in Progress, CS#=VCC | 105 | |
| Input Low Voltage | VIL | -0.5 | 0.8 | V | 105 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 105 | ||
| VCC to Ground Potential | -0.5 | 4 | V | 103 | |||
| Storage Temperature | -65 | 150 | °C | 103 | |||
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 103 | ||
| Supply Voltage | VCC | 2.7 | 3.6 | V | read, erase, and program operations | 105 | |
| Input Capacitance | CIN | 8 | pF | VIN = 0V | 103 | ||
| Output Capacitance | COUT | 10 | pF | VOUT = 0V | 103 | ||
| Clock Frequency for all commands (except Read) | fSCLK | 120 | MHz | 106 | |||
| Clock Frequency for READ instructions | fRSCLK | 50 | MHz | 106 | |||
| Clock Frequency for 2READ/DREAD | fTSCLK | 80 | MHz | 106 | |||
| Clock Frequency for 4READ/QREAD | fQ | 80 | MHz | 106 | |||
| Clock High Time | tCH | 7 | ns | Others (fSCLK) ≤ 66MHz | 106 | ||
| Clock Low Time | tCL | 7 | ns | Others (fSCLK) ≤ 66MHz | 106 | ||
| CS# Active Setup Time | tSLCH | 3 | ns | 106 | |||
| CS# Not Active Hold Time | tCHSL | 3 | ns | 106 | |||
| Data In Setup Time | tDVCH/tDVCL | 2 | ns | 106 | |||
| Data In Hold Time | tCHDX/tCLDX | 2 | ns | 106 | |||
| CS# Deselect Time | tSHSL | 7 | ns | From Read to next Read | 106 | ||
| CS# Deselect Time | tSHSL | 30 | ns | From Write/Erase/Program to Read Status Register | 106 | ||
| Output Disable Time | tSHQZ | 8 | ns | 106 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | Loading: 30pF | 106 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | Loading: 15pF | 106 | ||
| Output Hold Time | tCLQX | 1 | ns | Loading: 30pF | 106 | ||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 106 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 30 | us | 106 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 30 | us | 106 | |||
| Write Status/Configuration Register Cycle Time | tW | 40 | ms | 106 | |||
| Byte-Program | tBP | 15 | 30 | us | 106 | ||
| Page Program Cycle Time | tPP | 0.25 | 0.75 | ms | 106 | ||
| Sector Erase Cycle Time | tSE | 30 | 400 | ms | 106 | ||
| Block Erase (32KB) Cycle Time | tBE32 | 180 | 1000 | ms | 106 | ||
| Block Erase (64KB) Cycle Time | tBE | 380 | 2000 | ms | 106 | ||
| Chip Erase Cycle Time | tCE | 110 | 210 | s | 106 | ||
| Erase Suspend Latency | tESL | 25 | us | 106 | |||
| Program Suspend Latency | tPSL | 25 | us | 106 | |||
| VCC Rise Time | tVR | 500000 | us/V | Sampled, not 100% tested | 108 | ||
| Data retention | 20 | years | 55˚C | 112 | |||
| Erase/Program Cycle | 100000 | cycles | 111 |
CAD (KiCad official)
- Symbol:
MX25L25645GMI-10G - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mx25l25645gmi-10g-etched.step/mx25l25645gmi-10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l25645gmi-10g.step/mx25l25645gmi-10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (123 pp, sha256
718f67d89d8e3080, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).