main
Ray Publish 0.1.0 b0a8f5f

MX25L25635FMI-10G

MXIC(Macronix) · NOR FLASH · SOIC-16-300mil

MX25L25635FMI-10G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNU/SIO3 bidirectional Do not use, or serial data input and output in 4xI/O read mode; with 1I/O or 2I/O (QE bit not enabled) it must not be connected to GND and should go to VCC or float.
2 VCC power_in +3V power supply.
3 RESET# input Hardware reset pin, active low, with an internal pull up.
4 NC unconnected No connection.
5 NC unconnected No connection.
6 NC unconnected No connection.
7 CS# input Chip select; serial access to the device is enabled by CS#, and the device goes to standby mode when CS# is high and no operation is in progress.
8 SO/SIO1 bidirectional Serial data output for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode.
9 WP#/SIO2 bidirectional Write protection input (connect to GND if unused), or serial data input and output in 4xI/O read mode.
10 GND power_in Ground.
11 NC unconnected No connection.
12 NC unconnected No connection.
13 NC unconnected No connection.
14 NC unconnected No connection.
15 SI/SIO0 bidirectional Serial data input for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode.
16 SCLK input Serial clock input.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOIC-16-300mil
Category Memory
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 94
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 94
VCC Standby Current ISB1 15 60 uA VIN = VCC or GND, CS# = VCC 94
Deep Power-down Current ISB2 20 uA VIN = VCC or GND, CS# = VCC 94
VCC Read Current 133MHz ICC1 25 mA f=133MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open 94
VCC Read Current 104MHz ICC1 20 mA f=104MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open 94
VCC Read Current 84MHz ICC1 15 mA f=84MHz, SCLK=0.1VCC/0.9VCC, SO=Open 94
VCC Program Current (PP) ICC2 20 25 mA Program in Progress, CS# = VCC 94
VCC Write Status Register Current ICC3 20 mA Program status register in progress, CS#=VCC 94
VCC Sector/Block Erase Current ICC4 20 25 mA Erase in Progress, CS#=VCC 94
VCC Chip Erase Current ICC5 20 25 mA Erase in Progress, CS#=VCC 94
Input Low Voltage VIL -0.5 0.8 V 94
Output Low Voltage VOL 0.2 V IOL = 100uA 94
Input Capacitance CIN 6 pF VIN = 0V, TA = 25°C, f = 1.0 MHz 92
Output Capacitance COUT 8 pF VOUT = 0V, TA = 25°C, f = 1.0 MHz 92
Ambient Operating Temperature Industrial grade -40 85 °C 92
Storage Temperature -65 150 °C 92
Applied Input Voltage (max is VCC+0.5V) -0.5 V -0.5V to VCC+0.5V 92
Applied Output Voltage (max is VCC+0.5V) -0.5 V -0.5V to VCC+0.5V 92
VCC to Ground Potential (max is VCC+0.5V) -0.5 V -0.5V to VCC+0.5V 92
VCC Power Supply VCC 2.7 3.6 V 98
Operating Temperature -40 85 °C Industrial 94
Clock Frequency for all commands (except Read) fSCLK 0 133 MHz 95
Clock Frequency for READ instructions fRSCLK 50 MHz 95
Clock Frequency for 2READ instructions fTSCLK 84 MHz 95
Clock Frequency for 4READ instructions fQ 84 MHz 95
Clock High Time Others (fSCLK) tCH 3.3 ns 95
Clock Low Time Others (fSCLK) tCL 3.3 ns 95
CS# Active Setup Time tSLCH 5 ns 95
Data In Setup Time tDVCH 2 ns 95
Data In Hold Time tCHDX 4 ns 95
Output Disable Time tSHQZ 8 ns 95
Clock Low to Output Valid tCLQV 8 ns Loading: 30pF 95
Clock Low to Output Valid tCLQV 6 ns Loading: 15pF 95
Output Hold Time tCLQX 1 ns 95
CS# High to Deep Power-down Mode tDP 10 us 95
Write Status/Configuration Register Cycle Time tW 40 ms 95
Page Program Cycle Time tPP 0.6 3 ms 95
Sector Erase Cycle Time tSE 43 200 ms 95
Chip Erase Cycle Time tCE 120 300 s 95
VCC Rise Time tVR 20 500000 us/V 98
VCC(min.) to device operation tVSL 800 us 98
Command Inhibit Voltage VWI 2.3 2.5 V 98
Minimum duration for ensuring initialization tPWD 300 us 98

CAD (KiCad official)

  • Symbol: MX25L25635FMI-10G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: mx25l25635fmi-10g-etched.step / mx25l25635fmi-10g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l25635fmi-10g.step / mx25l25635fmi-10g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (105 pp, sha256 f7152949e248441d, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF