Generated by kicad-footprint-generator · KiCad file format 20260206
MX25L25635FMI-10G
MXIC(Macronix) · NOR FLASH · SOIC-16-300mil
MX25L25635FMI-10G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNU/SIO3 | bidirectional | Do not use, or serial data input and output in 4xI/O read mode; with 1I/O or 2I/O (QE bit not enabled) it must not be connected to GND and should go to VCC or float. |
| 2 | VCC | power_in | +3V power supply. |
| 3 | RESET# | input | Hardware reset pin, active low, with an internal pull up. |
| 4 | NC | unconnected | No connection. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | CS# | input | Chip select; serial access to the device is enabled by CS#, and the device goes to standby mode when CS# is high and no operation is in progress. |
| 8 | SO/SIO1 | bidirectional | Serial data output for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode. |
| 9 | WP#/SIO2 | bidirectional | Write protection input (connect to GND if unused), or serial data input and output in 4xI/O read mode. |
| 10 | GND | power_in | Ground. |
| 11 | NC | unconnected | No connection. |
| 12 | NC | unconnected | No connection. |
| 13 | NC | unconnected | No connection. |
| 14 | NC | unconnected | No connection. |
| 15 | SI/SIO0 | bidirectional | Serial data input for 1xI/O, or serial data input and output for 2xI/O or 4xI/O read mode. |
| 16 | SCLK | input | Serial clock input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOIC-16-300mil |
| Category | Memory |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 94 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 94 | |
| VCC Standby Current | ISB1 | 15 | 60 | uA | VIN = VCC or GND, CS# = VCC | 94 | |
| Deep Power-down Current | ISB2 | 20 | uA | VIN = VCC or GND, CS# = VCC | 94 | ||
| VCC Read Current 133MHz | ICC1 | 25 | mA | f=133MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 94 | ||
| VCC Read Current 104MHz | ICC1 | 20 | mA | f=104MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 94 | ||
| VCC Read Current 84MHz | ICC1 | 15 | mA | f=84MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 94 | ||
| VCC Program Current (PP) | ICC2 | 20 | 25 | mA | Program in Progress, CS# = VCC | 94 | |
| VCC Write Status Register Current | ICC3 | 20 | mA | Program status register in progress, CS#=VCC | 94 | ||
| VCC Sector/Block Erase Current | ICC4 | 20 | 25 | mA | Erase in Progress, CS#=VCC | 94 | |
| VCC Chip Erase Current | ICC5 | 20 | 25 | mA | Erase in Progress, CS#=VCC | 94 | |
| Input Low Voltage | VIL | -0.5 | 0.8 | V | 94 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 94 | ||
| Input Capacitance | CIN | 6 | pF | VIN = 0V, TA = 25°C, f = 1.0 MHz | 92 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V, TA = 25°C, f = 1.0 MHz | 92 | ||
| Ambient Operating Temperature Industrial grade | -40 | 85 | °C | 92 | |||
| Storage Temperature | -65 | 150 | °C | 92 | |||
| Applied Input Voltage (max is VCC+0.5V) | -0.5 | V | -0.5V to VCC+0.5V | 92 | |||
| Applied Output Voltage (max is VCC+0.5V) | -0.5 | V | -0.5V to VCC+0.5V | 92 | |||
| VCC to Ground Potential (max is VCC+0.5V) | -0.5 | V | -0.5V to VCC+0.5V | 92 | |||
| VCC Power Supply | VCC | 2.7 | 3.6 | V | 98 | ||
| Operating Temperature | -40 | 85 | °C | Industrial | 94 | ||
| Clock Frequency for all commands (except Read) | fSCLK | 0 | 133 | MHz | 95 | ||
| Clock Frequency for READ instructions | fRSCLK | 50 | MHz | 95 | |||
| Clock Frequency for 2READ instructions | fTSCLK | 84 | MHz | 95 | |||
| Clock Frequency for 4READ instructions | fQ | 84 | MHz | 95 | |||
| Clock High Time Others (fSCLK) | tCH | 3.3 | ns | 95 | |||
| Clock Low Time Others (fSCLK) | tCL | 3.3 | ns | 95 | |||
| CS# Active Setup Time | tSLCH | 5 | ns | 95 | |||
| Data In Setup Time | tDVCH | 2 | ns | 95 | |||
| Data In Hold Time | tCHDX | 4 | ns | 95 | |||
| Output Disable Time | tSHQZ | 8 | ns | 95 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | Loading: 30pF | 95 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | Loading: 15pF | 95 | ||
| Output Hold Time | tCLQX | 1 | ns | 95 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 95 | |||
| Write Status/Configuration Register Cycle Time | tW | 40 | ms | 95 | |||
| Page Program Cycle Time | tPP | 0.6 | 3 | ms | 95 | ||
| Sector Erase Cycle Time | tSE | 43 | 200 | ms | 95 | ||
| Chip Erase Cycle Time | tCE | 120 | 300 | s | 95 | ||
| VCC Rise Time | tVR | 20 | 500000 | us/V | 98 | ||
| VCC(min.) to device operation | tVSL | 800 | us | 98 | |||
| Command Inhibit Voltage | VWI | 2.3 | 2.5 | V | 98 | ||
| Minimum duration for ensuring initialization | tPWD | 300 | us | 98 |
CAD (KiCad official)
- Symbol:
MX25L25635FMI-10G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mx25l25635fmi-10g-etched.step/mx25l25635fmi-10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l25635fmi-10g.step/mx25l25635fmi-10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (105 pp, sha256
f7152949e248441d, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).