MX25L1006EMI-10G

{
  "schema_version": 1,
  "type": "component",
  "slug": "mx25l1006emi-10g",
  "title": "MX25L1006EMI-10G",
  "brief": "MXIC Macronix NOR FLASH, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "mx25l1006emi-10g"
  ],
  "component": {
    "mpn": "MX25L1006EMI-10G",
    "manufacturer": "MXIC Macronix",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/98d017fb89124913ae19b102253fad11.pdf",
    "parts": {
      "symbol": "mx25l1006emi-10g.kicad_sym",
      "footprint": "mx25l1006emi-10g.kicad_mod",
      "model_3d": "mx25l1006emi-10g-etched.glb",
      "model_3d_plain": "mx25l1006emi-10g.glb",
      "model_3d_step": "mx25l1006emi-10g-etched.step",
      "model_3d_step_plain": "mx25l1006emi-10g.step",
      "lbr": "mx25l1006emi-10g.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip Select, active-low. Drives the device into standby when high and enables the SPI interface when low. Internal state machine resets if CS# goes high during a HOLD condition."
      },
      {
        "number": "2",
        "name": "SO/SIO1",
        "type": "bidirectional",
        "description": "Serial Data Output for standard 1 x I/O SPI; also serves as data I/O bit 1 in Dual Output Read (DREAD, opcode 3Bh) mode."
      },
      {
        "number": "3",
        "name": "WP#",
        "type": "input",
        "description": "Write Protect, active-low. When low, together with the SRWD status bit, hardware-locks the BP0/BP1 and SRWD bits in the status register from further modification."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device."
      },
      {
        "number": "5",
        "name": "SI/SIO0",
        "type": "bidirectional",
        "description": "Serial Data Input for standard 1 x I/O SPI (commands, addresses, data-in); also serves as data I/O bit 0 in Dual Output Read (DREAD) mode."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial Clock input. Data on SI is latched on the rising edge; data on SO is shifted out on the falling edge. Supports SPI Modes 0 and 3, up to 104 MHz (80 MHz in Dual Output)."
      },
      {
        "number": "7",
        "name": "HOLD#",
        "type": "input",
        "description": "Hold input, active-low. Pauses serial communication with the device without deselecting it; SO becomes high-impedance while HOLD# is low. Does not interrupt program or erase operations in progress."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive power supply, +2.7 V to +3.6 V (nominal 3.3 V). Recommend local 0.1 uF decoupling to GND at the pin."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/98d017fb89124913ae19b102253fad11.pdf",
        "pages": 51,
        "sha256": "a21b3ff13068953b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mx25l1006emi-10g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mx25l1006emi-10g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ca44b223def6f42c2090dd66a69e9bb51f946d542deaab0fe82d07f771890c1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "MXIC Macronix",
      "Package": "SOP-8",
      "Category": "Memory",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "MX25L1006EMI-10G",
      "kind": "packaging"
    },
    {
      "mpn": "MX25L1006EMI-10GZUI",
      "kind": "packaging"
    },
    {
      "mpn": "MX25L1006EMI-10GXCI",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mx25l1006emi-10g"
  ],
  "discovery_pitch": "MX25L1006EMI-10G (MXIC Macronix) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mx25l1006emi-10g.kicad_sym",
    "mx25l1006emi-10g.kicad_mod",
    "mx25l1006emi-10g.glb",
    "mx25l1006emi-10g.step",
    "mx25l1006emi-10g.lbr",
    "docs/hero.png",
    "docs/mx25l1006emi-10g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:41:03.687Z"
}