component
MX25L1006EMI-10G
Public Made by Adomby adom
MXIC Macronix NOR FLASH, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMX25L1006EMI-10G
MXIC Macronix · NOR FLASH · SOP-8
MX25L1006EMI-10G from MXIC Macronix, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select, active-low. Drives the device into standby when high and enables the SPI interface when low. Internal state machine resets if CS# goes high during a HOLD condition. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for standard 1 x I/O SPI; also serves as data I/O bit 1 in Dual Output Read (DREAD, opcode 3Bh) mode. |
| 3 | WP# | input | Write Protect, active-low. When low, together with the SRWD status bit, hardware-locks the BP0/BP1 and SRWD bits in the status register from further modification. |
| 4 | GND | power_in | Ground reference (0 V) for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for standard 1 x I/O SPI (commands, addresses, data-in); also serves as data I/O bit 0 in Dual Output Read (DREAD) mode. |
| 6 | SCLK | input | Serial Clock input. Data on SI is latched on the rising edge; data on SO is shifted out on the falling edge. Supports SPI Modes 0 and 3, up to 104 MHz (80 MHz in Dual Output). |
| 7 | HOLD# | input | Hold input, active-low. Pauses serial communication with the device without deselecting it; SO becomes high-impedance while HOLD# is low. Does not interrupt program or erase operations in progress. |
| 8 | VCC | power_in | Positive power supply, +2.7 V to +3.6 V (nominal 3.3 V). Recommend local 0.1 uF decoupling to GND at the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC Macronix |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MX25L1006EMI-10GMX25L1006EMI-10GZUIMX25L1006EMI-10GXCI
CAD (KiCad official)
- Symbol:
MX25L1006EMI-10G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25l1006emi-10g-etched.step/mx25l1006emi-10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l1006emi-10g.step/mx25l1006emi-10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC Macronix datasheet (51 pp, sha256
a21b3ff13068953b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).