main
Ray
Publish 0.1.0
ec7de1b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240
{
"slug": "mt9523ct-10bf3",
"version": "0.1.0",
"type": "component",
"description": "Magn Tek Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"magnetic sensors",
"mt9523ct-10bf3",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mt9523ct-10bf3.kicad_sym",
"mt9523ct-10bf3.kicad_mod",
"mt9523ct-10bf3.glb",
"mt9523ct-10bf3.step",
"mt9523ct-10bf3.lbr",
"docs/hero.png",
"docs/mt9523ct-10bf3-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mt9523ct-10bf3-hero.glb",
"mt9523ct-10bf3-hero.overlay.json",
"mt9523ct-10bf3-etched.glb"
],
"component": {
"mpn": "MT9523CT-10BF3",
"manufacturer": "Magn Tek",
"package": "SOP-8",
"pin_count": 8,
"category": "Magnetic Sensors",
"subcategory": "Current Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4f2a7061345e487bab15000345df1ca5.pdf",
"parts": {
"symbol": "mt9523ct-10bf3.kicad_sym",
"footprint": "mt9523ct-10bf3.kicad_mod",
"model_3d": "mt9523ct-10bf3-hero.glb",
"model_3d_plain": "mt9523ct-10bf3-etched.glb",
"model_3d_step": "mt9523ct-10bf3-etched.step",
"model_3d_step_plain": "mt9523ct-10bf3.step",
"lbr": "mt9523ct-10bf3.lbr"
},
"distributor_links": {
"lcsc": "C7528174"
},
"distributor_check": {
"checked_at": "2026-11-05T00:59:00Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "IP+",
"type": "passive",
"description": "Input current positive terminal of the internal low-resistance (typically 1.0mΩ) conductor path, which is electrically isolated from the signal pins 5 to 8 with 2.5kVrms isolation for 1 minute."
},
{
"number": "2",
"name": "IP+",
"type": "passive",
"description": "Input current positive terminal, bonded in parallel with pin 1 to the internal conductor path that runs to pins 3 and 4, with the same 2.5kVrms isolation from the signal pins."
},
{
"number": "3",
"name": "IP-",
"type": "passive",
"description": "Input current negative terminal of the internal conductor path, which carries the measured current from pins 1 and 2 and is isolated from the signal pins 5 to 8."
},
{
"number": "4",
"name": "IP-",
"type": "passive",
"description": "Input current negative terminal, bonded in parallel with pin 3 to the internal conductor path that carries the measured current from pins 1 and 2."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Signal ground for the Hall sensor and output stage, referenced for the VOUT and VZCR outputs."
},
{
"number": "6",
"name": "VZCR",
"type": "output",
"description": "Zero-current reference voltage output, which is ratiometric to VCC (2.5V at VCC=5V) for proportional-output parts or fixed (2.5V for bidirectional 5V-fixed parts, 1.65V for 3.3V-fixed parts) for fixed-output parts, and is used with VOUT to measure zero-current offset single-ended or differentially."
},
{
"number": "7",
"name": "VOUT",
"type": "output",
"description": "Analog voltage output that is proportional to the input current, with zero-current output of 0.5×VCC for bidirectional proportional parts or 2.5V for bidirectional fixed-output parts."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input, specified for 5.0V or 3.3V DC supply operation, with minimum operating VCC of 2.5V stated in the power-up timing definition."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers taken from the numbered pin table on page 3 (1,2 IP+; 3,4 IP-; 5 GND; 6 VZCR; 7 VOUT; 8 ; MPN MT9523CT-10BF3 is not in the ordering table on page 4 (which lists MT9523CT-10UR5 and MT9523CT-1; Pin types are not stated in the datasheet. IP+/IP- are assigned passive because they are current-con"
],
"pages_sent": 8,
"cost_usd": 0.043,
"at": "2026-11-05T00:58:48"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/4f2a7061345e487bab15000345df1ca5.pdf",
"pages": 35,
"sha256": "47ac41e92a15e700",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mt9523ct-10bf3.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mt9523ct-10bf3-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "17be002c7e282a2873e5c5fb5cc3d8f9c7986ea8a3b397e4f179b7137b9173cc",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP-8",
"source_page": 34,
"D": {
"nom_mm": 4.9,
"range_mm": [
4.7,
5.1
]
},
"E1": {
"nom_mm": 3.9,
"range_mm": [
3.8,
4.0
]
},
"E": {
"nom_mm": 6.0,
"range_mm": [
5.8,
6.2
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
1.45,
1.75
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "mt9523ct-10bf3.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}