main
Ray Publish 0.1.0 bce1ae2

MT9222WT-30BR5

Magn Tek · Current Sensors · SOP-16-300mil

MT9222WT-30BR5 from Magn Tek, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Positive primary current input; current flows from pins 1-4 to pins 5-8 to give a positive output slope, with 0.85 mΩ typical primary conductor resistance.
2 IP+ passive Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit.
3 IP+ passive Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit.
4 IP+ passive Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit.
5 IP- passive Negative primary current terminal (current return); pins 5-8 are shorted together externally in the typical application circuit and are electrically isolated from signal pins 9-16.
6 IP- passive Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16.
7 IP- passive Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16.
8 IP- passive Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16.
9 NC unconnected No internal connection.
10 VCC power_in Supply input; 5 V nominal with 4.5 to 5.5 V operating range, and a bypass capacitor (CBYPASS, 0.1 µF in the application circuit) is required between VCC and GND.
11 NC unconnected No internal connection.
12 VOUT output Analog output proportional to primary current; output saturates at VOL 0.3 V max and VOH VCC−0.3 V min with RL ≥ 4.7 kΩ, CL 1-10 nF to GND, and ROUT 5 Ω max.
13 FILTER passive Bandwidth set pin; an external CFILTER with the internal 1.8 kΩ RF sets fc = 1/(2πRF·CFILTER), and leaving it open gives the fastest response time.
14 NC unconnected No internal connection.
15 GND power_in Signal ground reference for the supply, bypass and output load.
16 NC unconnected No internal connection.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOP-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 4.5 5 5.5 V 7
Supply Current ICC 14 20 mA TA = 25°C 7
Response Time TRESP 4 5 us IP = IPR(max), TA = 25°C, CL = 1nF 7
Analog Output Low Saturation Level VOL 0.3 V RL>=4.7KΩ 7
Output CAP Load CL 1 10 nF OUT to GND 7
DC Output resistance ROUT 5 Ω 7
Output RES Load to GND RL 4.7 KΩ OUT to GND 7
Output RES Load to VCC RL 4.7 KΩ OUT to VCC 7
Nonlinearity error ELIN -1.5 1.5 % Through full range of IP 7
Ratiometry Sensitivity Error ERAT_SNST -1.5 1.5 % VCC = 4.5 to 5.5 V, TA = 25°C 7
Ratiometry Quiescent Voltage Output Error ERAT_VOQ -1 1 % VCC = 4.5 to 5.5 V, TA = 25°C 7
Sensitivity Error Lifetime Drift ESNST_DRIFT -3 3 % TA=-40~125℃ 6
Total Output Error Lifetime Drift ETOT_DRIFT -3 3 % TA=-40~125℃ 6
Supply Voltage (absolute maximum) VCC 6 V 6
Reverse Battery Voltage VRCC -0.1 V 6
Reverse Output Voltage VROUT -0.1 V 6
Continuous Output Current (source) IOUT(source) 80 mA 6
Continuous Output Current (sink) IOUT(sink) 40 mA 6
Operating Ambient Temperature TA -40 125 ℃ 6
Storage Temperature TS -50 150 ℃ 6
Junction Temperature TJ 175 ℃ 6
Power-On Reset High Voltage VPORH 3.75 4 4.25 V TA = 25°C, VCC rising 8
Hall Plate Sensitivity Matching SNST(match) -1 1 % TA = 25°C 8
Optimized Input Current Range IPR -30 30 A 9
Zero-Current Output Error VOE -10 10 mV IP=0 A, TA=25°C 9
Zero-Current Output Error VOE -25 25 mV IP=0 A, TA=-40°C to 25°C 9
Sensitivity Error ESNST -1.1 1.1 % IP=30A, TA=25°C 9
Sensitivity Error ESNST -2.5 2.5 % IP=30A, TA=-40°C to 25°C 9
Total Output Error ETOT -1.5 1.5 % IP=30A, TA=25°C 9
Total Output Error ETOT -3.5 3.5 % IP=30A, TA = -40°C to 25°C 9
Sensitivity SNST 66.6 mV/A -30A≤IP≤30A 9
Power On Time TPO 190 us TA = 25°C, CL = 1nF, IP=IPR(max) applied 7
Rise time TR 3 us IP = IPR(max), A = 25°C, CL = 1nF 7
Propagation Delay TPD 2 us IP = IPR(max), TA = 25°C, CL = 1nF 7
Internal Bandwidth BW 150 KHz Small signal -3 dB; CL = 1 nF 7
Primary Conductor Resistance RIP 0.85 mΩ TA = 25°C 7
Noise Density IND 450 uA/√Hz TA = 25°C, CL = 1 nF 7
Internal filter resistance RF(int) 1.8 KΩ 7
Source Current of Over-Current-Limit ISCLP 80 mA 8
Sink Current of Over-Current-Limit ISCLN 40 mA 8
Power-On Reset Low Voltage VPORL 3.5 V TA = 25°C, VCC falling 8

CAD (KiCad official)

  • Symbol: MT9222WT-30BR5
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: mt9222wt-30br5-etched.step / mt9222wt-30br5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt9222wt-30br5.step / mt9222wt-30br5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (16 pp, sha256 af8620bfcf126083, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF