Generated by kicad-footprint-generator · KiCad file format 20260206
MT9222WT-30BR5
Magn Tek · Current Sensors · SOP-16-300mil
MT9222WT-30BR5 from Magn Tek, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive primary current input; current flows from pins 1-4 to pins 5-8 to give a positive output slope, with 0.85 mΩ typical primary conductor resistance. |
| 2 | IP+ | passive | Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit. |
| 3 | IP+ | passive | Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit. |
| 4 | IP+ | passive | Positive primary current input; pins 1-4 are shorted together externally in the typical application circuit. |
| 5 | IP- | passive | Negative primary current terminal (current return); pins 5-8 are shorted together externally in the typical application circuit and are electrically isolated from signal pins 9-16. |
| 6 | IP- | passive | Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16. |
| 7 | IP- | passive | Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16. |
| 8 | IP- | passive | Negative primary current terminal (current return); pins 5-8 are shorted together externally and are electrically isolated from signal pins 9-16. |
| 9 | NC | unconnected | No internal connection. |
| 10 | VCC | power_in | Supply input; 5 V nominal with 4.5 to 5.5 V operating range, and a bypass capacitor (CBYPASS, 0.1 µF in the application circuit) is required between VCC and GND. |
| 11 | NC | unconnected | No internal connection. |
| 12 | VOUT | output | Analog output proportional to primary current; output saturates at VOL 0.3 V max and VOH VCC−0.3 V min with RL ≥ 4.7 kΩ, CL 1-10 nF to GND, and ROUT 5 Ω max. |
| 13 | FILTER | passive | Bandwidth set pin; an external CFILTER with the internal 1.8 kΩ RF sets fc = 1/(2πRF·CFILTER), and leaving it open gives the fastest response time. |
| 14 | NC | unconnected | No internal connection. |
| 15 | GND | power_in | Signal ground reference for the supply, bypass and output load. |
| 16 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 7 | |
| Supply Current | ICC | 14 | 20 | mA | TA = 25°C | 7 | |
| Response Time | TRESP | 4 | 5 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 | |
| Analog Output Low Saturation Level | VOL | 0.3 | V | RL>=4.7KΩ | 7 | ||
| Output CAP Load | CL | 1 | 10 | nF | OUT to GND | 7 | |
| DC Output resistance | ROUT | 5 | Ω | 7 | |||
| Output RES Load to GND | RL | 4.7 | KΩ | OUT to GND | 7 | ||
| Output RES Load to VCC | RL | 4.7 | KΩ | OUT to VCC | 7 | ||
| Nonlinearity error | ELIN | -1.5 | 1.5 | % | Through full range of IP | 7 | |
| Ratiometry Sensitivity Error | ERAT_SNST | -1.5 | 1.5 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 | |
| Ratiometry Quiescent Voltage Output Error | ERAT_VOQ | -1 | 1 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 | |
| Sensitivity Error Lifetime Drift | ESNST_DRIFT | -3 | 3 | % | TA=-40~125℃ | 6 | |
| Total Output Error Lifetime Drift | ETOT_DRIFT | -3 | 3 | % | TA=-40~125℃ | 6 | |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 6 | |||
| Reverse Battery Voltage | VRCC | -0.1 | V | 6 | |||
| Reverse Output Voltage | VROUT | -0.1 | V | 6 | |||
| Continuous Output Current (source) | IOUT(source) | 80 | mA | 6 | |||
| Continuous Output Current (sink) | IOUT(sink) | 40 | mA | 6 | |||
| Operating Ambient Temperature | TA | -40 | 125 | ℃ | 6 | ||
| Storage Temperature | TS | -50 | 150 | ℃ | 6 | ||
| Junction Temperature | TJ | 175 | ℃ | 6 | |||
| Power-On Reset High Voltage | VPORH | 3.75 | 4 | 4.25 | V | TA = 25°C, VCC rising | 8 |
| Hall Plate Sensitivity Matching | SNST(match) | -1 | 1 | % | TA = 25°C | 8 | |
| Optimized Input Current Range | IPR | -30 | 30 | A | 9 | ||
| Zero-Current Output Error | VOE | -10 | 10 | mV | IP=0 A, TA=25°C | 9 | |
| Zero-Current Output Error | VOE | -25 | 25 | mV | IP=0 A, TA=-40°C to 25°C | 9 | |
| Sensitivity Error | ESNST | -1.1 | 1.1 | % | IP=30A, TA=25°C | 9 | |
| Sensitivity Error | ESNST | -2.5 | 2.5 | % | IP=30A, TA=-40°C to 25°C | 9 | |
| Total Output Error | ETOT | -1.5 | 1.5 | % | IP=30A, TA=25°C | 9 | |
| Total Output Error | ETOT | -3.5 | 3.5 | % | IP=30A, TA = -40°C to 25°C | 9 | |
| Sensitivity | SNST | 66.6 | mV/A | -30A≤IP≤30A | 9 | ||
| Power On Time | TPO | 190 | us | TA = 25°C, CL = 1nF, IP=IPR(max) applied | 7 | ||
| Rise time | TR | 3 | us | IP = IPR(max), A = 25°C, CL = 1nF | 7 | ||
| Propagation Delay | TPD | 2 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 | ||
| Internal Bandwidth | BW | 150 | KHz | Small signal -3 dB; CL = 1 nF | 7 | ||
| Primary Conductor Resistance | RIP | 0.85 | mΩ | TA = 25°C | 7 | ||
| Noise Density | IND | 450 | uA/√Hz | TA = 25°C, CL = 1 nF | 7 | ||
| Internal filter resistance | RF(int) | 1.8 | KΩ | 7 | |||
| Source Current of Over-Current-Limit | ISCLP | 80 | mA | 8 | |||
| Sink Current of Over-Current-Limit | ISCLN | 40 | mA | 8 | |||
| Power-On Reset Low Voltage | VPORL | 3.5 | V | TA = 25°C, VCC falling | 8 |
CAD (KiCad official)
- Symbol:
MT9222WT-30BR5 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mt9222wt-30br5-etched.step/mt9222wt-30br5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt9222wt-30br5.step/mt9222wt-30br5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (16 pp, sha256
af8620bfcf126083, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).