main
Ray
mt9221ct-10br5: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d52e24c
MT9221CT-10BR5
Magn Tek · Current Sensors · SOP-8
MT9221CT-10BR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input positive terminal. Internally tied to pin 2; short pins 1 and 2 together on the board. Part of the low-resistance (1.5 mΩ typ.) isolated primary conductor path with pins 3/4. |
| 2 | IP+ | passive | Primary current input positive terminal. Internally tied to pin 1; short pins 1 and 2 together on the board. Part of the isolated primary conductor path (1.5 mΩ typ.). |
| 3 | IP- | passive | Primary current input negative terminal. Internally tied to pin 4; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path. |
| 4 | IP- | passive | Primary current input negative terminal. Internally tied to pin 3; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path. |
| 5 | GND | power_in | Signal ground reference for the low-voltage side of the sensor. Electrically isolated from the primary current conductor pins (2.6 kVrms dielectric isolation, SOP-8). |
| 6 | FILTER | passive | Bandwidth-setting filter pin. Connect an external capacitor (CFILTER) to GND to reduce bandwidth and optimize output noise. Internal filter resistance is 1.8 kΩ typical; default internal bandwidth is 150 kHz. |
| 7 | VOUT | output | Analog output voltage proportional to the primary sensed current. Ratiometric from VCC with quiescent (0 A) output = VCC × 0.5 (2.5 V typ. at 5 V), sensitivity 200 mV/A, output range 0.5 V to VCC-0.3 V, DC output resistance 5 Ω typ. Drive up to 80 mA source / 40 mA sink. |
| 8 | VCC | power_in | Positive supply input, 4.5 V to 5.5 V (5.0 V nominal). ICC = 14 mA typ. (20 mA max). Requires a 0.1 µF bypass capacitor to GND close to the pin. Power-on reset thresholds: VPORH = 4 V typ., VPORL = 3.5 V typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Sensor |
| Pins | 8 |
Ordering variants
MT9221CT-10BR5MT9221CT-10BR5QT
CAD (KiCad official)
- Symbol:
MT9221CT-10BR5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt9221ct-10br5-etched.step/mt9221ct-10br5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt9221ct-10br5.step/mt9221ct-10br5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (None pp, sha256
6687bbd3c43ad19a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT9221CT-10BR5
**Magn Tek** · Current Sensors · SOP-8
MT9221CT-10BR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input positive terminal. Internally tied to pin 2; short pins 1 and 2 together on the board. Part of the low-resistance (1.5 mΩ typ.) isolated primary conductor path with pins 3/4. |
| 2 | IP+ | passive | Primary current input positive terminal. Internally tied to pin 1; short pins 1 and 2 together on the board. Part of the isolated primary conductor path (1.5 mΩ typ.). |
| 3 | IP- | passive | Primary current input negative terminal. Internally tied to pin 4; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path. |
| 4 | IP- | passive | Primary current input negative terminal. Internally tied to pin 3; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path. |
| 5 | GND | power_in | Signal ground reference for the low-voltage side of the sensor. Electrically isolated from the primary current conductor pins (2.6 kVrms dielectric isolation, SOP-8). |
| 6 | FILTER | passive | Bandwidth-setting filter pin. Connect an external capacitor (CFILTER) to GND to reduce bandwidth and optimize output noise. Internal filter resistance is 1.8 kΩ typical; default internal bandwidth is 150 kHz. |
| 7 | VOUT | output | Analog output voltage proportional to the primary sensed current. Ratiometric from VCC with quiescent (0 A) output = VCC × 0.5 (2.5 V typ. at 5 V), sensitivity 200 mV/A, output range 0.5 V to VCC-0.3 V, DC output resistance 5 Ω typ. Drive up to 80 mA source / 40 mA sink. |
| 8 | VCC | power_in | Positive supply input, 4.5 V to 5.5 V (5.0 V nominal). ICC = 14 mA typ. (20 mA max). Requires a 0.1 µF bypass capacitor to GND close to the pin. Power-on reset thresholds: VPORH = 4 V typ., VPORL = 3.5 V typ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Sensor |
| Pins | 8 |
## Ordering variants
- `MT9221CT-10BR5`
- `MT9221CT-10BR5QT`
## CAD (KiCad official)
- Symbol: `MT9221CT-10BR5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mt9221ct-10br5-etched.step` / `mt9221ct-10br5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt9221ct-10br5.step` / `mt9221ct-10br5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Magn Tek datasheet](docs/mt9221ct-10br5-datasheet.pdf) (None pp, sha256 `6687bbd3c43ad19a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt9221ct-10br5-datasheet.pdf)