main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mt9221ct-10br5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mt9221ct-10br5: viewers · Ray
mt9221ct-10br5-etched.fit.json mt9221ct-10br5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9221ct-10br5-etched.glb mt9221ct-10br5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9221ct-10br5-etched.step mt9221ct-10br5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9221ct-10br5.glb Publish 0.1.0 · Ray
mt9221ct-10br5.kicad_mod Publish 0.1.0 · Ray
mt9221ct-10br5.kicad_sym Publish 0.1.0 · Ray
mt9221ct-10br5.lbr Publish 0.1.0 · Ray
mt9221ct-10br5.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json mt9221ct-10br5: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mt9221ct-10br5: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MT9221CT-10BR5

Magn Tek · Current Sensors · SOP-8

MT9221CT-10BR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Primary current input positive terminal. Internally tied to pin 2; short pins 1 and 2 together on the board. Part of the low-resistance (1.5 mΩ typ.) isolated primary conductor path with pins 3/4.
2 IP+ passive Primary current input positive terminal. Internally tied to pin 1; short pins 1 and 2 together on the board. Part of the isolated primary conductor path (1.5 mΩ typ.).
3 IP- passive Primary current input negative terminal. Internally tied to pin 4; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path.
4 IP- passive Primary current input negative terminal. Internally tied to pin 3; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path.
5 GND power_in Signal ground reference for the low-voltage side of the sensor. Electrically isolated from the primary current conductor pins (2.6 kVrms dielectric isolation, SOP-8).
6 FILTER passive Bandwidth-setting filter pin. Connect an external capacitor (CFILTER) to GND to reduce bandwidth and optimize output noise. Internal filter resistance is 1.8 kΩ typical; default internal bandwidth is 150 kHz.
7 VOUT output Analog output voltage proportional to the primary sensed current. Ratiometric from VCC with quiescent (0 A) output = VCC × 0.5 (2.5 V typ. at 5 V), sensitivity 200 mV/A, output range 0.5 V to VCC-0.3 V, DC output resistance 5 Ω typ. Drive up to 80 mA source / 40 mA sink.
8 VCC power_in Positive supply input, 4.5 V to 5.5 V (5.0 V nominal). ICC = 14 mA typ. (20 mA max). Requires a 0.1 µF bypass capacitor to GND close to the pin. Power-on reset thresholds: VPORH = 4 V typ., VPORL = 3.5 V typ.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOP-8
Category Sensor
Pins 8

Ordering variants

  • MT9221CT-10BR5
  • MT9221CT-10BR5QT

CAD (KiCad official)

  • Symbol: MT9221CT-10BR5
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mt9221ct-10br5-etched.step / mt9221ct-10br5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt9221ct-10br5.step / mt9221ct-10br5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (None pp, sha256 6687bbd3c43ad19a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF