main
Ray
Publish 0.1.0
4d01b04
MT7832A
MAXIC Tech · LED Drivers · SOP-8
MT7832A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Output of the internal error amplifier, which is connected to ground through a capacitor for frequency compensation; COMP is precharged during startup and the system begins normal operation once it reaches 1.4V. |
| 2 | DSEN | input | Feedback voltage input, connected through a resistor divider to the LED output or the auxiliary winding to reflect the output voltage; it is sampled 2 µs after the DRV pulse turns off, with the normal-operation level kept below 2.7V, an overvoltage threshold of 3.2V (three times within 1 ms), and a short-circuit threshold of 400 mV. |
| 3 | VDD | power_in | Supply pin with a recommended operating range of 9V to 24V, a startup voltage of 18V, an undervoltage lockout at 9V, and an internal clamp voltage of 24V with a clamp current capability of 10 mA. |
| 4 | CS | input | Source of the internal power MOSFET and current-sense input, where the overcurrent protection threshold is 1.4V with a 300 ns leading-edge blanking time, and the MOSFET is turned off cycle-by-cycle when this threshold is exceeded. |
| 5 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A. |
| 6 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A. |
| 7 | NC | unconnected | No-connect pin that is left floating and is not connected internally. |
| 8 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (工作电压) | VDD | 9 | 24 | V | 2 | ||
| Operating temperature (ambient) (工作温度(环境)) | TA | -40 | 105 | °C | 2 | ||
| Output power (输出功率) | 9 | W | 90VAC~264VAC | 2 | |||
| Output power (输出功率) | 13 | W | 176VAC~264VAC | 2 | |||
| VDD pin voltage (VDD 管脚电压) | VDD | -0.3 | V | upper limit printed as VDD clamp voltage (VDD 钳位电压), no numeric value | 2 | ||
| DRAIN pin voltage (DRAIN 管脚电压) | DRAIN | -0.3 | 550 | V | 2 | ||
| COMP/CS/DSEN pin voltage (COMP/CS/DSEN 管脚电压) | COMP/CS/DSEN | -0.3 | 6 | V | 2 | ||
| Soldering temperature (焊接温度) | 260 | °C | 10 s | 2 | |||
| Maximum power dissipation (PDMAX 最大功耗) | PDMAX | 0.8 | W | 2 | |||
| Storage temperature (储存温度) | -55 | 150 | °C | 2 | |||
| Start-up voltage (启动电压) | VSTP | 18 | V | VDD 电压从 0V 升压 | 3 | ||
| UVLO low-voltage protection threshold (低压保护 降压) | UVLO | 9 | V | VDD 电压从(VSTP+1V)降压 | 3 | ||
| Start-up current (启动电流) | ISTP | 25 | μA | VDD=16V | 3 | ||
| VDD clamp voltage (VDD 管脚的钳位电压) | VDD_CLAMP | 24 | V | 3 | |||
| VDD clamp current capability (VDD 管脚钳位电流能力) | ICLAMP | 10 | mA | 3 | |||
| Static current (静态电流) | IQ | 1 | mA | 3 | |||
| Feedback reference voltage (反馈环路的参考电压) | VREF-FB | 196 | 200 | 204 | mV | 闭环测试 (closed-loop test) | 3 |
| DSEN short-circuit protection threshold (DSEN 管脚的短路保护阈值) | SCP | 400 | mV | 3 | |||
| DSEN overvoltage protection threshold (DSEN 管脚的过压保护阈值) | OVP | 3.2 | V | 3 | |||
| DSEN front-edge blanking time (DSEN 管脚的前端消隐时间) | LEB1 | 2 | uS | 3 | |||
| Minimum switching period (最小开关周期) | MinT | 10 | uS | 3 | |||
| CS overcurrent protection threshold (CS 管脚的过流保护阈值) | OCP | 1.4 | V | 3 | |||
| CS front-edge blanking time (CS 管脚的前端消隐时间) | LEB2 | 300 | nS | 3 | |||
| Over-temperature protection (过温保护) | OTP | 155 | °C | 3 | |||
| Over-temperature protection hysteresis (过温保护的迟滞) | Hys-OTP | 15 | °C | 3 | |||
| Internal high-voltage power MOSFET on-resistance (内部高压功率管导通阻抗) | Ron | 5.5 | Ω | VGS=10V/IDS=1.0A | 3 | ||
| Breakdown voltage (击穿电压) | BVDSS | 550 | V | VGS=0V/IDS=250uA | 3 | ||
| Junction-to-ambient thermal resistance (内部芯片到环境 RθJA) | RθJA | 128 | °C/W | JEDEC 51-3, tested at 25°C ambient | 2 |
CAD (KiCad official)
- Symbol:
MT7832A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt7832a-etched.step/mt7832a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt7832a.step/mt7832a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MAXIC Tech datasheet (7 pp, sha256
64368f9914d18fef, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT7832A
**MAXIC Tech** · LED Drivers · SOP-8
MT7832A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Output of the internal error amplifier, which is connected to ground through a capacitor for frequency compensation; COMP is precharged during startup and the system begins normal operation once it reaches 1.4V. |
| 2 | DSEN | input | Feedback voltage input, connected through a resistor divider to the LED output or the auxiliary winding to reflect the output voltage; it is sampled 2 µs after the DRV pulse turns off, with the normal-operation level kept below 2.7V, an overvoltage threshold of 3.2V (three times within 1 ms), and a short-circuit threshold of 400 mV. |
| 3 | VDD | power_in | Supply pin with a recommended operating range of 9V to 24V, a startup voltage of 18V, an undervoltage lockout at 9V, and an internal clamp voltage of 24V with a clamp current capability of 10 mA. |
| 4 | CS | input | Source of the internal power MOSFET and current-sense input, where the overcurrent protection threshold is 1.4V with a 300 ns leading-edge blanking time, and the MOSFET is turned off cycle-by-cycle when this threshold is exceeded. |
| 5 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A. |
| 6 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A. |
| 7 | NC | unconnected | No-connect pin that is left floating and is not connected internally. |
| 8 | GND | power_in | Ground reference pin for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (工作电压) | VDD | 9 | | 24 | V | | 2 |
| Operating temperature (ambient) (工作温度(环境)) | TA | -40 | | 105 | °C | | 2 |
| Output power (输出功率) | | | | 9 | W | 90VAC~264VAC | 2 |
| Output power (输出功率) | | | | 13 | W | 176VAC~264VAC | 2 |
| VDD pin voltage (VDD 管脚电压) | VDD | -0.3 | | | V | upper limit printed as VDD clamp voltage (VDD 钳位电压), no numeric value | 2 |
| DRAIN pin voltage (DRAIN 管脚电压) | DRAIN | -0.3 | | 550 | V | | 2 |
| COMP/CS/DSEN pin voltage (COMP/CS/DSEN 管脚电压) | COMP/CS/DSEN | -0.3 | | 6 | V | | 2 |
| Soldering temperature (焊接温度) | | | | 260 | °C | 10 s | 2 |
| Maximum power dissipation (PDMAX 最大功耗) | PDMAX | | | 0.8 | W | | 2 |
| Storage temperature (储存温度) | | -55 | | 150 | °C | | 2 |
| Start-up voltage (启动电压) | VSTP | | 18 | | V | VDD 电压从 0V 升压 | 3 |
| UVLO low-voltage protection threshold (低压保护 降压) | UVLO | | 9 | | V | VDD 电压从(VSTP+1V)降压 | 3 |
| Start-up current (启动电流) | ISTP | | 25 | | μA | VDD=16V | 3 |
| VDD clamp voltage (VDD 管脚的钳位电压) | VDD_CLAMP | | 24 | | V | | 3 |
| VDD clamp current capability (VDD 管脚钳位电流能力) | ICLAMP | | 10 | | mA | | 3 |
| Static current (静态电流) | IQ | | 1 | | mA | | 3 |
| Feedback reference voltage (反馈环路的参考电压) | VREF-FB | 196 | 200 | 204 | mV | 闭环测试 (closed-loop test) | 3 |
| DSEN short-circuit protection threshold (DSEN 管脚的短路保护阈值) | SCP | | 400 | | mV | | 3 |
| DSEN overvoltage protection threshold (DSEN 管脚的过压保护阈值) | OVP | | 3.2 | | V | | 3 |
| DSEN front-edge blanking time (DSEN 管脚的前端消隐时间) | LEB1 | | 2 | | uS | | 3 |
| Minimum switching period (最小开关周期) | MinT | | 10 | | uS | | 3 |
| CS overcurrent protection threshold (CS 管脚的过流保护阈值) | OCP | | 1.4 | | V | | 3 |
| CS front-edge blanking time (CS 管脚的前端消隐时间) | LEB2 | | 300 | | nS | | 3 |
| Over-temperature protection (过温保护) | OTP | | 155 | | °C | | 3 |
| Over-temperature protection hysteresis (过温保护的迟滞) | Hys-OTP | | 15 | | °C | | 3 |
| Internal high-voltage power MOSFET on-resistance (内部高压功率管导通阻抗) | Ron | | 5.5 | | Ω | VGS=10V/IDS=1.0A | 3 |
| Breakdown voltage (击穿电压) | BVDSS | | 550 | | V | VGS=0V/IDS=250uA | 3 |
| Junction-to-ambient thermal resistance (内部芯片到环境 RθJA) | RθJA | | 128 | | °C/W | JEDEC 51-3, tested at 25°C ambient | 2 |
## CAD (KiCad official)
- Symbol: `MT7832A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mt7832a-etched.step` / `mt7832a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt7832a.step` / `mt7832a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MAXIC Tech datasheet](docs/mt7832a-datasheet.pdf) (7 pp, sha256 `64368f9914d18fef`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt7832a-datasheet.pdf)