main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mt7832a: viewers · Ray
mt7832a-etched.glb Publish 0.1.0 · Ray
mt7832a-etched.step mt7832a: factory component page (tier=lcsc) · Ray
mt7832a-hero.glb mt7832a: hero GLB from the etched model (keeps the MPN mark) · Ray
mt7832a-hero.overlay.json Publish 0.1.0 · Ray
mt7832a.glb Publish 0.1.0 · Ray
mt7832a.kicad_mod Publish 0.1.0 · Ray
mt7832a.kicad_sym Publish 0.1.0 · Ray
mt7832a.lbr Publish 0.1.0 · Ray
mt7832a.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MT7832A

MAXIC Tech · LED Drivers · SOP-8

MT7832A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Output of the internal error amplifier, which is connected to ground through a capacitor for frequency compensation; COMP is precharged during startup and the system begins normal operation once it reaches 1.4V.
2 DSEN input Feedback voltage input, connected through a resistor divider to the LED output or the auxiliary winding to reflect the output voltage; it is sampled 2 µs after the DRV pulse turns off, with the normal-operation level kept below 2.7V, an overvoltage threshold of 3.2V (three times within 1 ms), and a short-circuit threshold of 400 mV.
3 VDD power_in Supply pin with a recommended operating range of 9V to 24V, a startup voltage of 18V, an undervoltage lockout at 9V, and an internal clamp voltage of 24V with a clamp current capability of 10 mA.
4 CS input Source of the internal power MOSFET and current-sense input, where the overcurrent protection threshold is 1.4V with a 300 ns leading-edge blanking time, and the MOSFET is turned off cycle-by-cycle when this threshold is exceeded.
5 DRAIN passive Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A.
6 DRAIN passive Drain of the internal high-voltage power MOSFET, rated for a breakdown voltage (BVDSS) of 550V with an on-resistance of 5.5 Ω at VGS = 10V and IDS = 1.0A.
7 NC unconnected No-connect pin that is left floating and is not connected internally.
8 GND power_in Ground reference pin for the device.

Key specifications

Parameter Value
Manufacturer MAXIC Tech
Package SOP-8
Category Display Modules / LED Drivers / Display Drivers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (工作电压) VDD 9 24 V 2
Operating temperature (ambient) (工作温度(环境)) TA -40 105 °C 2
Output power (输出功率) 9 W 90VAC~264VAC 2
Output power (输出功率) 13 W 176VAC~264VAC 2
VDD pin voltage (VDD 管脚电压) VDD -0.3 V upper limit printed as VDD clamp voltage (VDD 钳位电压), no numeric value 2
DRAIN pin voltage (DRAIN 管脚电压) DRAIN -0.3 550 V 2
COMP/CS/DSEN pin voltage (COMP/CS/DSEN 管脚电压) COMP/CS/DSEN -0.3 6 V 2
Soldering temperature (焊接温度) 260 °C 10 s 2
Maximum power dissipation (PDMAX 最大功耗) PDMAX 0.8 W 2
Storage temperature (储存温度) -55 150 °C 2
Start-up voltage (启动电压) VSTP 18 V VDD 电压从 0V 升压 3
UVLO low-voltage protection threshold (低压保护 降压) UVLO 9 V VDD 电压从(VSTP+1V)降压 3
Start-up current (启动电流) ISTP 25 μA VDD=16V 3
VDD clamp voltage (VDD 管脚的钳位电压) VDD_CLAMP 24 V 3
VDD clamp current capability (VDD 管脚钳位电流能力) ICLAMP 10 mA 3
Static current (静态电流) IQ 1 mA 3
Feedback reference voltage (反馈环路的参考电压) VREF-FB 196 200 204 mV 闭环测试 (closed-loop test) 3
DSEN short-circuit protection threshold (DSEN 管脚的短路保护阈值) SCP 400 mV 3
DSEN overvoltage protection threshold (DSEN 管脚的过压保护阈值) OVP 3.2 V 3
DSEN front-edge blanking time (DSEN 管脚的前端消隐时间) LEB1 2 uS 3
Minimum switching period (最小开关周期) MinT 10 uS 3
CS overcurrent protection threshold (CS 管脚的过流保护阈值) OCP 1.4 V 3
CS front-edge blanking time (CS 管脚的前端消隐时间) LEB2 300 nS 3
Over-temperature protection (过温保护) OTP 155 °C 3
Over-temperature protection hysteresis (过温保护的迟滞) Hys-OTP 15 °C 3
Internal high-voltage power MOSFET on-resistance (内部高压功率管导通阻抗) Ron 5.5 Ω VGS=10V/IDS=1.0A 3
Breakdown voltage (击穿电压) BVDSS 550 V VGS=0V/IDS=250uA 3
Junction-to-ambient thermal resistance (内部芯片到环境 RθJA) RθJA 128 °C/W JEDEC 51-3, tested at 25°C ambient 2

CAD (KiCad official)

  • Symbol: MT7832A
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mt7832a-etched.step / mt7832a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt7832a.step / mt7832a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MAXIC Tech datasheet (7 pp, sha256 64368f9914d18fef, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF