main
Ray Publish 0.1.0 dd0ab05
{
  "slug": "mt25ql128aba8esf-0sit",
  "version": "0.1.0",
  "type": "component",
  "description": "Micron Tech NOR FLASH, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "mt25ql128aba8esf-0sit",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mt25ql128aba8esf-0sit.kicad_sym",
    "mt25ql128aba8esf-0sit.kicad_mod",
    "mt25ql128aba8esf-0sit.glb",
    "mt25ql128aba8esf-0sit.step",
    "mt25ql128aba8esf-0sit.lbr",
    "docs/hero.png",
    "docs/mt25ql128aba8esf-0sit-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mt25ql128aba8esf-0sit-hero.glb",
    "mt25ql128aba8esf-0sit-hero.overlay.json"
  ],
  "component": {
    "mpn": "MT25QL128ABA8ESF-0SIT",
    "manufacturer": "Micron Tech",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8f6611fe71b24132f763a2c7542178e2.pdf",
    "parts": {
      "symbol": "mt25ql128aba8esf-0sit.kicad_sym",
      "footprint": "mt25ql128aba8esf-0sit.kicad_mod",
      "model_3d": "mt25ql128aba8esf-0sit-hero.glb",
      "model_3d_plain": "mt25ql128aba8esf-0sit.glb",
      "model_3d_step": "mt25ql128aba8esf-0sit-etched.step",
      "model_3d_step_plain": "mt25ql128aba8esf-0sit.step",
      "lbr": "mt25ql128aba8esf-0sit.lbr"
    },
    "distributor_links": {
      "lcsc": "C427722",
      "digikey": "MT25QL128ABA8ESF-0SIT-ND",
      "mouser": "340-283255-TRAY"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T07:37:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MT25QL128ABA8ESF-0SIT-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "340-283255-TRAY",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DQ3/HOLD#",
        "type": "bidirectional",
        "description": "Serial I/O DQ3 shared with HOLD#, which pauses serial communication without deselecting or resetting the device (HOLD# is disabled in QIO-SPI mode or DTR operation); DQ3 must be driven HIGH or pulled up when using single/dual I/O commands."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Core and I/O power supply, 2.7 V to 3.6 V operating range."
      },
      {
        "number": "3",
        "name": "RESET#",
        "type": "input",
        "description": "Active-low hardware reset that tri-states outputs and resets the device (data may be lost if driven LOW during a write, program or erase); it has an internal pull-up and may be left unconnected if unused."
      },
      {
        "number": "4",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "5",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "6",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "7",
        "name": "S#",
        "type": "input",
        "description": "Chip select: HIGH puts the device in standby and tri-states outputs, LOW enables it, and a falling edge is required before any command after power-up."
      },
      {
        "number": "8",
        "name": "DQ1",
        "type": "bidirectional",
        "description": "Serial I/O DQ1: serial data output in legacy x1 extended SPI, bidirectional in dual and quad modes."
      },
      {
        "number": "9",
        "name": "W#/DQ2",
        "type": "bidirectional",
        "description": "Write protect input that freezes the status register when the status register write-disable bit is 1 and W# is LOW, or DQ2 I/O in quad modes; it has no internal pull-up, cannot be left floating and must be driven."
      },
      {
        "number": "10",
        "name": "VSS",
        "type": "power_in",
        "description": "Core and I/O ground connection."
      },
      {
        "number": "11",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "12",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "13",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "14",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use: must be left floating and not connected to any other signal or power supply."
      },
      {
        "number": "15",
        "name": "DQ0",
        "type": "bidirectional",
        "description": "Serial I/O DQ0: serial data input in legacy x1 extended SPI, bidirectional in dual and quad modes."
      },
      {
        "number": "16",
        "name": "C",
        "type": "input",
        "description": "Serial clock: command inputs latch on the rising edge, in STR data is output on the falling edge, and in DTR data is latched and output on both edges; maximum 133 MHz STR, 90 MHz DTR."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Figure 7 SO16 signal map is flattened in the extracted text, so the pin-to-position assignment w; DNU pins 4-8 and 11-12 were assigned by elimination: they are the only remaining positions for the 1; Datasheet Note 1 says DQ3 must be driven HIGH or pulled up externally when single/dual I/O is used, "
        ],
        "pages_sent": 93,
        "cost_usd": 0.3805,
        "at": "2026-11-13T07:37:18"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/8f6611fe71b24132f763a2c7542178e2.pdf",
        "pages": 93,
        "sha256": "1cbf328ecd1ee6f0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mt25ql128aba8esf-0sit.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mt25ql128aba8esf-0sit-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "299bdebd241487ce16adbb8fbe23b9fd4810d2a4b9ee608ef0d71a86942bc048",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SF",
      "source_page": 19,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.325,
        "range_mm": [
          10.0,
          10.65
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.5,
        "range_mm": [
          2.35,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "mt25ql128aba8esf-0sit.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}