main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mt25ql128aba8esf-0sit: viewers rendered from the public page · Ray
mt25ql128aba8esf-0sit-etched.glb mt25ql128aba8esf-0sit: factory component page (tier=lcsc) · Ray
mt25ql128aba8esf-0sit-etched.step mt25ql128aba8esf-0sit: factory component page (tier=lcsc) · Ray
mt25ql128aba8esf-0sit-hero.glb mt25ql128aba8esf-0sit: hero GLB from the etched model (keeps the MPN mark) · Ray
mt25ql128aba8esf-0sit-hero.overlay.json mt25ql128aba8esf-0sit: hero GLB from the etched model (keeps the MPN mark) · Ray
mt25ql128aba8esf-0sit.glb Publish 0.1.0 · Ray
mt25ql128aba8esf-0sit.kicad_mod Publish 0.1.0 · Ray
mt25ql128aba8esf-0sit.kicad_sym Publish 0.1.0 · Ray
mt25ql128aba8esf-0sit.lbr Publish 0.1.0 · Ray
mt25ql128aba8esf-0sit.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MT25QL128ABA8ESF-0SIT

Micron Tech · NOR FLASH · SOP-16-300mil

MT25QL128ABA8ESF-0SIT from Micron Tech, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DQ3/HOLD# bidirectional Serial I/O DQ3 shared with HOLD#, which pauses serial communication without deselecting or resetting the device (HOLD# is disabled in QIO-SPI mode or DTR operation); DQ3 must be driven HIGH or pulled up when using single/dual I/O commands.
2 VCC power_in Core and I/O power supply, 2.7 V to 3.6 V operating range.
3 RESET# input Active-low hardware reset that tri-states outputs and resets the device (data may be lost if driven LOW during a write, program or erase); it has an internal pull-up and may be left unconnected if unused.
4 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
5 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
6 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
7 S# input Chip select: HIGH puts the device in standby and tri-states outputs, LOW enables it, and a falling edge is required before any command after power-up.
8 DQ1 bidirectional Serial I/O DQ1: serial data output in legacy x1 extended SPI, bidirectional in dual and quad modes.
9 W#/DQ2 bidirectional Write protect input that freezes the status register when the status register write-disable bit is 1 and W# is LOW, or DQ2 I/O in quad modes; it has no internal pull-up, cannot be left floating and must be driven.
10 VSS power_in Core and I/O ground connection.
11 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
12 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
13 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
14 DNU unconnected Do not use: must be left floating and not connected to any other signal or power supply.
15 DQ0 bidirectional Serial I/O DQ0: serial data input in legacy x1 extended SPI, bidirectional in dual and quad modes.
16 C input Serial clock: command inputs latch on the rising edge, in STR data is output on the falling edge, and in DTR data is latched and output on both edges; maximum 133 MHz STR, 90 MHz DTR.

Key specifications

Parameter Value
Manufacturer Micron Tech
Package SOP-16-300mil
Category Memory
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 81
Supply voltage VCC -0.6 4 V 81
Input/output voltage with respect to ground VIO -0.6 V 81
Electrostatic discharge voltage (human body model) VESD -2000 2000 V JESD22-A114A (C1=100pF, R1=1500Ω, R2=500Ω) 81
Supply voltage VCC 2.7 3.6 V 81
Ambient operating temperature TA -40 85 °C IT range 81
Input/output capacitance (DQ0/DQ1/DQ2/DQ3) CIN/OUT 10 pF JEP147 VNA, VBIAS=VCC/2, TA=25°C, f=54 MHz 81
Input capacitance (other pins) CIN 6 pF JEP147 VNA, VBIAS=VCC/2, TA=25°C, f=54 MHz 81
Input/chip select capacitance CIN/S# 10 pF JEP147 VNA, VBIAS=VCC/2, TA=25°C, f=54 MHz 81
Input leakage current ILI -2 2 µA 83
Output leakage current ILO -2 2 µA 83
Standby current (IT range) ICC1 15 50 µA S#=VCC, VIN=VSS or VCC 83
Deep power-down current (IT range) ICC2 5 30 µA S#=VCC, VIN=VSS or VCC 83
Operating current (fast-read extended I/O) ICC3 16 mA C=0.1VCC/0.9VCC at 133 MHz, DQ1 open 83
Operating current (fast-read extended I/O) ICC3 8 mA C=0.1VCC/0.9VCC at 54 MHz, DQ1 open 83
Operating current (fast-read dual I/O) ICC3 20 mA C=0.1VCC/0.9VCC at 133 MHz, DQ1 open 83
Operating current (fast-read quad I/O) ICC3 22 mA C=0.1VCC/0.9VCC at 133 MHz, DQ1 open 83
Operating current (DTR) ICC3 28 mA C=0.1VCC/0.9VCC at 80 MHz DTR, DQ open 83
Operating current (DTR) ICC3 31 mA C=0.1VCC/0.9VCC at 90 MHz DTR, DQ open 83
Operating current (PROGRAM operations) ICC4 35 mA S#=VCC 83
Operating current (WRITE operations) ICC5 35 mA S#=VCC 83
Operating current (erase) ICC6 35 mA S#=VCC 83
Input low voltage VIL -0.5 V 83
Output low voltage VOL 0.4 V IOL=1.6mA 84
Clock frequency for all commands other than READ fC 133 MHz STR 85
Clock frequency for all commands other than READ fC 90 MHz DTR 85
Clock frequency for READ command (03h) fR 54 MHz STR 85
Clock frequency for READ command (03h) fR 27 MHz DTR 85
Clock HIGH time tCH 3.375 ns STR 85
Clock LOW time tCL 3.375 ns STR 85
Clock rise time (peak-to-peak) tCLCH 0.1 V/ns STR/DTR 85
Clock fall time (peak-to-peak) tCHCL 0.1 V/ns STR/DTR 85
S# active setup time (relative to clock) tSLCH 3.375 ns STR/DTR 85
S# not active hold time (relative to clock) tCHSL 3.375 ns STR/DTR 85
Data in setup time tDVCH 1.75 ns STR 85
Data in setup time tDVCH 1.5 ns DTR 85
Data in hold time tCHDX 2.3 ns STR/DTR 85
S# active hold time (relative to clock) tCHSH 3.375 ns STR 85
S# not active setup time (relative to clock) tSHCH 3.375 ns STR 85
S# deselect time after a READ command tSHSL1 20 ns STR/DTR 85
S# deselect time after a nonREAD command tSHSL2 50 ns STR/DTR, nonREAD commands 85
Output disable time tSHQZ 7 ns STR/DTR 85
Clock LOW to output valid tCLQV 6 ns STR/DTR, under 30pF 85
Clock LOW to output valid tCLQV 5 ns STR/DTR, under 10pF 85
Output hold time tCLQX 1.5 ns STR/DTR 85
HOLD setup time (relative to clock) tHLCH 3.375 ns STR/DTR 85
HOLD hold time (relative to clock) tCHHH 3.375 ns STR/DTR 85
HOLD to output Low-Z tHHQX 8 ns STR/DTR 86
HOLD to output High-Z tHLQZ 8 ns STR/DTR 86
Write protect setup time tWHSL 20 ns STR/DTR, applies when STATUS REGISTER WRITE is set to 1 86
Write protect hold time tSHWL 100 ns STR/DTR, applies when STATUS REGISTER WRITE is set to 1 86
S# HIGH to deep power-down tDP 3 µs STR/DTR 86
S# HIGH to standby mode (DPD exit time) tRDP 30 µs STR/DTR 86
WRITE STATUS REGISTER cycle time tW 1.3 8 ms STR/DTR 86
Page program time (256 bytes) tPP 120 1800 µs STR/DTR, 256 bytes 86
Sector erase time tSE 0.15 1 s STR/DTR 86
4KB subsector erase time tSSE 0.05 0.4 s STR/DTR 86
128Mb bulk erase time tBE 38 114 s STR/DTR 86
Reset pulse width tRLRH 50 ns 87
Reset recovery time tRHSL 40 ns device deselected (S# HIGH) and in standby mode 87

CAD (KiCad official)

  • Symbol: MT25QL128ABA8ESF-0SIT
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: mt25ql128aba8esf-0sit-etched.step / mt25ql128aba8esf-0sit-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt25ql128aba8esf-0sit.step / mt25ql128aba8esf-0sit.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Micron Tech datasheet (93 pp, sha256 1cbf328ecd1ee6f0, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF