main
Ray
Publish 0.1.0
300f32e
MSPM0L1116SRHBR
Texas Instruments · IC · VQFN-32(5x5)
MSPM0L1116SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_TX, I2C0_SDA, TIMA0_C0, BSLSDA and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA. |
| 2 | PA1 | bidirectional | General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_RX, I2C0_SCL, TIMA0_C1, BSLSCL and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA. |
| 3 | NRST | input | Active-low reset input that must be pulled high to VDD or the device cannot start; the datasheet recommends a 47 kΩ pull-up with a 10 nF capacitor, and the pin also serves as a WAKE input. |
| 4 | VDD | power_in | Supply input for the device, 1.62 V to 3.6 V, decoupled with 10 µF to VSS as recommended. |
| 5 | VSS | power_in | Ground reference of the device, the return for VDD and the VCORE capacitor. |
| 6 | PA2 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it is also the ROSC pin for the optional 100 kΩ, 0.1% SYSOSC frequency-correction resistor and may be used as digital I/O when that FCL mode is not used. |
| 7 | PA3 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXIN low-frequency crystal input and UART1_TX. |
| 8 | PA4 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXOUT low-frequency crystal output and LFCLK_IN and UART1_RX. |
| 9 | PA5 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, UART1_TX, TIMG0_C0 and FCC_IN. |
| 10 | PA6 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions HFCLK_IN, UART0_RTS, UART1_RX and TIMG0_C1. |
| 11 | PA7 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions CLK_OUT, FCC_IN, SPI0_POCI and TIMA0_C1. |
| 12 | PA8 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_TX, SPI0_CS0, I2C0_SDA and HFCLK_IN. |
| 13 | PA9 | bidirectional | High-speed I/O (HSIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_RX, I2C0_SCL, CLK_OUT and RTC_OUT. |
| 14 | PA10 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_TX, SPI0_POCI, I2C0_SDA, BSLTX and WAKE. |
| 15 | PA11 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, SPI0_SCK, I2C0_SCL, BSLRX and WAKE. |
| 16 | PA12 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_SCK, TIMA0_C3, FCC_IN, UART1_CTS and ADC0 analog input A0_8. |
| 17 | PA13 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_POCI, RTC_OUT, UART1_RTS and ADC0 analog input A0_9. |
| 18 | PA14 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, SPI0_PICO, CLK_OUT and ADC0 analog input A0_12. |
| 19 | PA15 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RTS, UART0_TX, TIMG1_C0 and WAKE. |
| 20 | PA16 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, FCC_IN, TIMG1_C1, ADC0 analog input A0_13 and WAKE. |
| 21 | PA17 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_TX, TIMG8_C0, SPI0_CS1, ADC0 analog input A0_14 and WAKE. |
| 22 | PA18 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_RX, TIMG8_C1, BSL_invoke, ADC0 analog input A0_4 and WAKE. |
| 23 | PA19 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWDIO for the 2-pin serial wire debug interface. |
| 24 | PA20 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWCLK for the 2-pin serial wire debug interface. |
| 25 | PA21 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, UART1_CTS, TIMA0_C0 and the VREF- external reference input. |
| 26 | PA22 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, UART1_RTS, I2C0_SCL, CLK_OUT and ADC0 analog input A0_7. |
| 27 | PA23 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, TIMA0_C3, TIMG8_C0 and the VREF+ external reference input. |
| 28 | PA24 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, TIMG8_C1, TIMA0_C3N and ADC0 analog input A0_3. |
| 29 | PA25 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMA0_C3, TIMA0_C1N and ADC0 analog input A0_2. |
| 30 | PA26 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C0, TIMA_FAL0, TIMA0_C3N and ADC0 analog input A0_1. |
| 31 | PA27 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C1, TIMA_FAL2, CLK_OUT, RTC_OUT and ADC0 analog input A0_0. |
| 32 | VCORE | power_out | Internal core-supply node at 1.35 V that must only be connected to a 470 nF capacitor to VSS, with no external voltage or load applied. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum, at VDD pin) | VDD | -0.3 | 4.1 | V | At VDD pin | 26 | |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 26 | |
| Input voltage, common tolerance pins | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) | 26 | |
| Current into VDD pin (source) | IVDD | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 26 | ||
| Current into VDD pin (source) | IVDD | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 26 | ||
| Current out of VSS pin (sink) | IVSS | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 26 | ||
| Current out of VSS pin (sink) | IVSS | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 26 | ||
| Current of SDIO pin | IIO | 6 | mA | Current sunk or sourced by SDIO pin, VDD>=2.7V | 26 | ||
| Current of HSIO pin | IIO | 6 | mA | Current sunk or sourced by HSIO pin, VDD>=2.7V | 26 | ||
| Current of HDIO pin | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 26 | ||
| Current of ODIO pin | IIO | 20 | mA | Current sunk by ODIO pin | 26 | ||
| Supported diode current at any device pin | ID | -2 | 2 | mA | Excluding Open Drain IO and PB24 | 26 | |
| Ambient temperature | TA | -40 | 125 | °C | 26 | ||
| Junction temperature | TJ | -40 | 130 | °C | 26 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 26 | ||
| Supply voltage | VDD | 1.62 | 3.6 | V | 26 | ||
| Ambient temperature | TA | -40 | 125 | °C | 27 | ||
| Max junction temperature | TJ | 130 | °C | 27 | |||
| MCLK, CPUCLK, ULPCLK frequency | fMCLK | 32 | MHz | With 1 flash wait state | 27 | ||
| MCLK, CPUCLK, ULPCLK frequency | fMCLK | 24 | MHz | With 0 flash wait states | 27 | ||
| Supply current in SLEEP, CPU halted | IDDSLEEP | 1594 | 1730 | uA | VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, -40°C | 28 | |
| Supply current in SLEEP, CPU halted | IDDSLEEP | 1656 | 1920 | uA | VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, 125°C | 28 | |
| Supply current in STOP0 | IDDSTOP0 | 698 | 760 | uA | VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, -40°C | 28 | |
| Supply current in STOP0 | IDDSTOP0 | 721 | 795 | uA | VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, 125°C | 28 | |
| Supply current in STOP1 | IDDSTOP1 | 232 | 255 | uA | VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, -40°C | 28 | |
| Supply current in STOP1 | IDDSTOP1 | 257 | 290 | uA | VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, 125°C | 28 | |
| Supply current in STOP2 | IDDSTOP2 | 51 | 60 | uA | VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, -40°C | 28 | |
| Supply current in STOP2 | IDDSTOP2 | 70 | 92 | uA | VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, 125°C | 28 | |
| Supply current in STANDBY0 | IDDSTBY0 | 1.7 | 2 | uA | VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, -40°C | 28 | |
| Supply current in STANDBY0 | IDDSTBY0 | 14 | 31 | uA | VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, 125°C | 28 | |
| Supply current in STANDBY1 | IDDSTBY1 | 1.4 | 1.7 | uA | VDD=3.3V, LFCLK=LFOSC, STOPCLKSTBY=1, RTC enabled, -40°C | 28 | |
| Supply current in SHUTDOWN | IDDSHDN | 57 | 75 | nA | VDD=3.3V, all inputs tied to 0V or VDD, -40°C | 28 | |
| High level input voltage, ODIO | VIH | 2 | 5.5 | V | ODIO, VDD≥2.7V | 33 | |
| Low level input voltage, ODIO | VIL | -0.3 | 0.8 | V | ODIO, VDD≥2.7V | 33 | |
| High-Z leakage current, SDIO (except PB24) | Ilkg | 50 | nA | 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 125 °C | 33 | ||
| Low level output voltage, SDIO | VOL | 0.4 | V | VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 25 °C | 35 | ||
| Low level output voltage, SDIO | VOL | 0.45 | V | VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 125 °C | 35 | ||
| Low level output voltage, ODIO | VOL | 0.4 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C | 35 | ||
| Low level output voltage, ODIO | VOL | 0.45 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C | 35 | ||
| Supply Monitor voltage divider (VDD/3) accuracy | VSupplyMon | -1.5 | 1.5 | % | ADC input channel: Supply Monitor | 37 | |
| Integral linearity error (INL) | EI | -2 | 2 | LSB | External reference | 38 | |
| Differential linearity error (DNL) | ED | -1 | 1 | LSB | Guaranteed no missing codes; External reference | 38 | |
| Offset error | EO | -3.5 | 3.5 | mV | External reference | 38 | |
| Gain error | EG | -4 | 4 | LSB | External reference | 38 | |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | °C | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=2h (VREF=1.4V), ADC tSample=12.5µs | 38 |
| Temperature sensor temperature coefficient | TSc | -2.05 | -1.9 | -1.75 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 38 |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 39 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 39 |
| VREF operating supply current | IVREF | 80 | 100 | µA | BUFCONFIG = {0, 1}, No load | 39 | |
| SYSOSC accuracy, FCL enabled, internal ROSC | fSYSOSC | -0.8 | 1.3 | % | SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC assumed | 32 | |
| LFOSC accuracy | fLFOSC | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 33 | |
| Program and erase supply voltage | VDDPGM/ERASE | 1.62 | 3.6 | V | 30 | ||
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| SYSOSC accuracy, FCL disabled, 32MHz | fSYSOSC | -2.6 | 1.8 | % | SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ | 32 | |
| Thermal resistance, junction-to-ambient | RθJA | 35.2 | °C/W | VQFN-32 (RHB) | 27 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 27.8 | °C/W | VQFN-32 (RHB) | 27 | ||
| Thermal resistance, junction-to-board | RθJB | 16.2 | °C/W | VQFN-32 (RHB) | 27 | ||
| Junction-to-top characterization parameter | ΨJT | 0.7 | °C/W | VQFN-32 (RHB) | 27 | ||
| Junction-to-board characterization parameter | ΨJB | 16.1 | °C/W | VQFN-32 (RHB) | 27 | ||
| Thermal resistance, junction-to-case (bottom) | RθJC(bot) | 6.3 | °C/W | VQFN-32 (RHB) | 27 |
CAD (KiCad official)
- Symbol:
MSPM0L1116SRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
mspm0l1116srhbr-etched.step/mspm0l1116srhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0l1116srhbr.step/mspm0l1116srhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
bf02c1ee12b515f7, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSPM0L1116SRHBR
**Texas Instruments** · IC · VQFN-32(5x5)
MSPM0L1116SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_TX, I2C0_SDA, TIMA0_C0, BSLSDA and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA. |
| 2 | PA1 | bidirectional | General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_RX, I2C0_SCL, TIMA0_C1, BSLSCL and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA. |
| 3 | NRST | input | Active-low reset input that must be pulled high to VDD or the device cannot start; the datasheet recommends a 47 kΩ pull-up with a 10 nF capacitor, and the pin also serves as a WAKE input. |
| 4 | VDD | power_in | Supply input for the device, 1.62 V to 3.6 V, decoupled with 10 µF to VSS as recommended. |
| 5 | VSS | power_in | Ground reference of the device, the return for VDD and the VCORE capacitor. |
| 6 | PA2 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it is also the ROSC pin for the optional 100 kΩ, 0.1% SYSOSC frequency-correction resistor and may be used as digital I/O when that FCL mode is not used. |
| 7 | PA3 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXIN low-frequency crystal input and UART1_TX. |
| 8 | PA4 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXOUT low-frequency crystal output and LFCLK_IN and UART1_RX. |
| 9 | PA5 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, UART1_TX, TIMG0_C0 and FCC_IN. |
| 10 | PA6 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions HFCLK_IN, UART0_RTS, UART1_RX and TIMG0_C1. |
| 11 | PA7 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions CLK_OUT, FCC_IN, SPI0_POCI and TIMA0_C1. |
| 12 | PA8 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_TX, SPI0_CS0, I2C0_SDA and HFCLK_IN. |
| 13 | PA9 | bidirectional | High-speed I/O (HSIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_RX, I2C0_SCL, CLK_OUT and RTC_OUT. |
| 14 | PA10 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_TX, SPI0_POCI, I2C0_SDA, BSLTX and WAKE. |
| 15 | PA11 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, SPI0_SCK, I2C0_SCL, BSLRX and WAKE. |
| 16 | PA12 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_SCK, TIMA0_C3, FCC_IN, UART1_CTS and ADC0 analog input A0_8. |
| 17 | PA13 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_POCI, RTC_OUT, UART1_RTS and ADC0 analog input A0_9. |
| 18 | PA14 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, SPI0_PICO, CLK_OUT and ADC0 analog input A0_12. |
| 19 | PA15 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RTS, UART0_TX, TIMG1_C0 and WAKE. |
| 20 | PA16 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, FCC_IN, TIMG1_C1, ADC0 analog input A0_13 and WAKE. |
| 21 | PA17 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_TX, TIMG8_C0, SPI0_CS1, ADC0 analog input A0_14 and WAKE. |
| 22 | PA18 | bidirectional | High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_RX, TIMG8_C1, BSL_invoke, ADC0 analog input A0_4 and WAKE. |
| 23 | PA19 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWDIO for the 2-pin serial wire debug interface. |
| 24 | PA20 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWCLK for the 2-pin serial wire debug interface. |
| 25 | PA21 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, UART1_CTS, TIMA0_C0 and the VREF- external reference input. |
| 26 | PA22 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, UART1_RTS, I2C0_SCL, CLK_OUT and ADC0 analog input A0_7. |
| 27 | PA23 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, TIMA0_C3, TIMG8_C0 and the VREF+ external reference input. |
| 28 | PA24 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, TIMG8_C1, TIMA0_C3N and ADC0 analog input A0_3. |
| 29 | PA25 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMA0_C3, TIMA0_C1N and ADC0 analog input A0_2. |
| 30 | PA26 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C0, TIMA_FAL0, TIMA0_C3N and ADC0 analog input A0_1. |
| 31 | PA27 | bidirectional | General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C1, TIMA_FAL2, CLK_OUT, RTC_OUT and ADC0 analog input A0_0. |
| 32 | VCORE | power_out | Internal core-supply node at 1.35 V that must only be connected to a 470 nF capacitor to VSS, with no external voltage or load applied. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum, at VDD pin) | VDD | -0.3 | | 4.1 | V | At VDD pin | 26 |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 26 |
| Input voltage, common tolerance pins | VI | -0.3 | | 4.1 | V | Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) | 26 |
| Current into VDD pin (source) | IVDD | | | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 26 |
| Current into VDD pin (source) | IVDD | | | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 26 |
| Current out of VSS pin (sink) | IVSS | | | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 26 |
| Current out of VSS pin (sink) | IVSS | | | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 26 |
| Current of SDIO pin | IIO | | | 6 | mA | Current sunk or sourced by SDIO pin, VDD>=2.7V | 26 |
| Current of HSIO pin | IIO | | | 6 | mA | Current sunk or sourced by HSIO pin, VDD>=2.7V | 26 |
| Current of HDIO pin | IIO | | | 20 | mA | Current sunk or sourced by HDIO pin | 26 |
| Current of ODIO pin | IIO | | | 20 | mA | Current sunk by ODIO pin | 26 |
| Supported diode current at any device pin | ID | -2 | | 2 | mA | Excluding Open Drain IO and PB24 | 26 |
| Ambient temperature | TA | -40 | | 125 | °C | | 26 |
| Junction temperature | TJ | -40 | | 130 | °C | | 26 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 26 |
| Supply voltage | VDD | 1.62 | | 3.6 | V | | 26 |
| Ambient temperature | TA | -40 | | 125 | °C | | 27 |
| Max junction temperature | TJ | | | 130 | °C | | 27 |
| MCLK, CPUCLK, ULPCLK frequency | fMCLK | | | 32 | MHz | With 1 flash wait state | 27 |
| MCLK, CPUCLK, ULPCLK frequency | fMCLK | | | 24 | MHz | With 0 flash wait states | 27 |
| Supply current in SLEEP, CPU halted | IDDSLEEP | | 1594 | 1730 | uA | VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, -40°C | 28 |
| Supply current in SLEEP, CPU halted | IDDSLEEP | | 1656 | 1920 | uA | VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, 125°C | 28 |
| Supply current in STOP0 | IDDSTOP0 | | 698 | 760 | uA | VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, -40°C | 28 |
| Supply current in STOP0 | IDDSTOP0 | | 721 | 795 | uA | VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, 125°C | 28 |
| Supply current in STOP1 | IDDSTOP1 | | 232 | 255 | uA | VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, -40°C | 28 |
| Supply current in STOP1 | IDDSTOP1 | | 257 | 290 | uA | VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, 125°C | 28 |
| Supply current in STOP2 | IDDSTOP2 | | 51 | 60 | uA | VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, -40°C | 28 |
| Supply current in STOP2 | IDDSTOP2 | | 70 | 92 | uA | VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, 125°C | 28 |
| Supply current in STANDBY0 | IDDSTBY0 | | 1.7 | 2 | uA | VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, -40°C | 28 |
| Supply current in STANDBY0 | IDDSTBY0 | | 14 | 31 | uA | VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, 125°C | 28 |
| Supply current in STANDBY1 | IDDSTBY1 | | 1.4 | 1.7 | uA | VDD=3.3V, LFCLK=LFOSC, STOPCLKSTBY=1, RTC enabled, -40°C | 28 |
| Supply current in SHUTDOWN | IDDSHDN | | 57 | 75 | nA | VDD=3.3V, all inputs tied to 0V or VDD, -40°C | 28 |
| High level input voltage, ODIO | VIH | 2 | | 5.5 | V | ODIO, VDD≥2.7V | 33 |
| Low level input voltage, ODIO | VIL | -0.3 | | 0.8 | V | ODIO, VDD≥2.7V | 33 |
| High-Z leakage current, SDIO (except PB24) | Ilkg | | | 50 | nA | 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 125 °C | 33 |
| Low level output voltage, SDIO | VOL | | | 0.4 | V | VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 25 °C | 35 |
| Low level output voltage, SDIO | VOL | | | 0.45 | V | VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 125 °C | 35 |
| Low level output voltage, ODIO | VOL | | | 0.4 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C | 35 |
| Low level output voltage, ODIO | VOL | | | 0.45 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C | 35 |
| Supply Monitor voltage divider (VDD/3) accuracy | VSupplyMon | -1.5 | | 1.5 | % | ADC input channel: Supply Monitor | 37 |
| Integral linearity error (INL) | EI | -2 | | 2 | LSB | External reference | 38 |
| Differential linearity error (DNL) | ED | -1 | | 1 | LSB | Guaranteed no missing codes; External reference | 38 |
| Offset error | EO | -3.5 | | 3.5 | mV | External reference | 38 |
| Gain error | EG | -4 | | 4 | LSB | External reference | 38 |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | °C | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=2h (VREF=1.4V), ADC tSample=12.5µs | 38 |
| Temperature sensor temperature coefficient | TSc | -2.05 | -1.9 | -1.75 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 38 |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 39 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 39 |
| VREF operating supply current | IVREF | | 80 | 100 | µA | BUFCONFIG = {0, 1}, No load | 39 |
| SYSOSC accuracy, FCL enabled, internal ROSC | fSYSOSC | -0.8 | | 1.3 | % | SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC assumed | 32 |
| LFOSC accuracy | fLFOSC | -5 | | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 33 |
| Program and erase supply voltage | VDDPGM/ERASE | 1.62 | | 3.6 | V | | 30 |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| SYSOSC accuracy, FCL disabled, 32MHz | fSYSOSC | -2.6 | | 1.8 | % | SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ | 32 |
| Thermal resistance, junction-to-ambient | RθJA | | 35.2 | | °C/W | VQFN-32 (RHB) | 27 |
| Thermal resistance, junction-to-case (top) | RθJC(top) | | 27.8 | | °C/W | VQFN-32 (RHB) | 27 |
| Thermal resistance, junction-to-board | RθJB | | 16.2 | | °C/W | VQFN-32 (RHB) | 27 |
| Junction-to-top characterization parameter | ΨJT | | 0.7 | | °C/W | VQFN-32 (RHB) | 27 |
| Junction-to-board characterization parameter | ΨJB | | 16.1 | | °C/W | VQFN-32 (RHB) | 27 |
| Thermal resistance, junction-to-case (bottom) | RθJC(bot) | | 6.3 | | °C/W | VQFN-32 (RHB) | 27 |
## CAD (KiCad official)
- Symbol: `MSPM0L1116SRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `mspm0l1116srhbr-etched.step` / `mspm0l1116srhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0l1116srhbr.step` / `mspm0l1116srhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/mspm0l1116.pdf?ts=1762935354433&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FMSPM0L1116%252Fpart-details%252FMSPM0L1116SPTR) (86 pp, sha256 `bf02c1ee12b515f7`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mspm0l1116srhbr-datasheet.pdf)