main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mspm0l1116srhbr: viewers · Ray
mspm0l1116srhbr-etched.glb Publish 0.1.0 · Ray
mspm0l1116srhbr-etched.step mspm0l1116srhbr: factory component page (tier=mfr) · Ray
mspm0l1116srhbr-hero.glb mspm0l1116srhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
mspm0l1116srhbr-hero.overlay.json Publish 0.1.0 · Ray
mspm0l1116srhbr.glb Publish 0.1.0 · Ray
mspm0l1116srhbr.kicad_mod Publish 0.1.0 · Ray
mspm0l1116srhbr.kicad_sym Publish 0.1.0 · Ray
mspm0l1116srhbr.lbr Publish 0.1.0 · Ray
mspm0l1116srhbr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

MSPM0L1116SRHBR

Texas Instruments · IC · VQFN-32(5x5)

MSPM0L1116SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_TX, I2C0_SDA, TIMA0_C0, BSLSDA and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA.
2 PA1 bidirectional General-purpose I/O on a 5V-tolerant open-drain (ODIO) buffer with alternate functions UART0_RX, I2C0_SCL, TIMA0_C1, BSLSCL and WAKE; it needs an external pull-up to drive high and the ODIO pin sinks at most 20 mA.
3 NRST input Active-low reset input that must be pulled high to VDD or the device cannot start; the datasheet recommends a 47 kΩ pull-up with a 10 nF capacitor, and the pin also serves as a WAKE input.
4 VDD power_in Supply input for the device, 1.62 V to 3.6 V, decoupled with 10 µF to VSS as recommended.
5 VSS power_in Ground reference of the device, the return for VDD and the VCORE capacitor.
6 PA2 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it is also the ROSC pin for the optional 100 kΩ, 0.1% SYSOSC frequency-correction resistor and may be used as digital I/O when that FCL mode is not used.
7 PA3 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXIN low-frequency crystal input and UART1_TX.
8 PA4 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V; it also carries the LFXOUT low-frequency crystal output and LFCLK_IN and UART1_RX.
9 PA5 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, UART1_TX, TIMG0_C0 and FCC_IN.
10 PA6 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions HFCLK_IN, UART0_RTS, UART1_RX and TIMG0_C1.
11 PA7 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions CLK_OUT, FCC_IN, SPI0_POCI and TIMA0_C1.
12 PA8 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_TX, SPI0_CS0, I2C0_SDA and HFCLK_IN.
13 PA9 bidirectional High-speed I/O (HSIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART1_RX, I2C0_SCL, CLK_OUT and RTC_OUT.
14 PA10 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_TX, SPI0_POCI, I2C0_SDA, BSLTX and WAKE.
15 PA11 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, SPI0_SCK, I2C0_SCL, BSLRX and WAKE.
16 PA12 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_SCK, TIMA0_C3, FCC_IN, UART1_CTS and ADC0 analog input A0_8.
17 PA13 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_POCI, RTC_OUT, UART1_RTS and ADC0 analog input A0_9.
18 PA14 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions UART0_CTS, SPI0_PICO, CLK_OUT and ADC0 analog input A0_12.
19 PA15 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RTS, UART0_TX, TIMG1_C0 and WAKE.
20 PA16 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART0_RX, FCC_IN, TIMG1_C1, ADC0 analog input A0_13 and WAKE.
21 PA17 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_TX, TIMG8_C0, SPI0_CS1, ADC0 analog input A0_14 and WAKE.
22 PA18 bidirectional High-drive I/O (HDIO), limited to 20 mA, with alternate functions UART1_RX, TIMG8_C1, BSL_invoke, ADC0 analog input A0_4 and WAKE.
23 PA19 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWDIO for the 2-pin serial wire debug interface.
24 PA20 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate function SWCLK for the 2-pin serial wire debug interface.
25 PA21 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, UART1_CTS, TIMA0_C0 and the VREF- external reference input.
26 PA22 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, UART1_RTS, I2C0_SCL, CLK_OUT and ADC0 analog input A0_7.
27 PA23 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS3, TIMA0_C3, TIMG8_C0 and the VREF+ external reference input.
28 PA24 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions SPI0_CS2, TIMG8_C1, TIMA0_C3N and ADC0 analog input A0_3.
29 PA25 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMA0_C3, TIMA0_C1N and ADC0 analog input A0_2.
30 PA26 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C0, TIMA_FAL0, TIMA0_C3N and ADC0 analog input A0_1.
31 PA27 bidirectional General-purpose I/O with standard drive (SDIO), limited to 6 mA at VDD ≥ 2.7 V, with alternate functions TIMG8_C1, TIMA_FAL2, CLK_OUT, RTC_OUT and ADC0 analog input A0_0.
32 VCORE power_out Internal core-supply node at 1.35 V that must only be connected to a 470 nF capacitor to VSS, with no external voltage or load applied.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum, at VDD pin) VDD -0.3 4.1 V At VDD pin 26
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 26
Input voltage, common tolerance pins VI -0.3 4.1 V Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) 26
Current into VDD pin (source) IVDD 80 mA -40 °C ≤ Tj ≤ 130 °C 26
Current into VDD pin (source) IVDD 100 mA -40 °C ≤ Tj ≤ 90 °C 26
Current out of VSS pin (sink) IVSS 80 mA -40 °C ≤ Tj ≤ 130 °C 26
Current out of VSS pin (sink) IVSS 100 mA -40 °C ≤ Tj ≤ 90 °C 26
Current of SDIO pin IIO 6 mA Current sunk or sourced by SDIO pin, VDD>=2.7V 26
Current of HSIO pin IIO 6 mA Current sunk or sourced by HSIO pin, VDD>=2.7V 26
Current of HDIO pin IIO 20 mA Current sunk or sourced by HDIO pin 26
Current of ODIO pin IIO 20 mA Current sunk by ODIO pin 26
Supported diode current at any device pin ID -2 2 mA Excluding Open Drain IO and PB24 26
Ambient temperature TA -40 125 °C 26
Junction temperature TJ -40 130 °C 26
Storage temperature Tstg -40 150 °C 26
Supply voltage VDD 1.62 3.6 V 26
Ambient temperature TA -40 125 °C 27
Max junction temperature TJ 130 °C 27
MCLK, CPUCLK, ULPCLK frequency fMCLK 32 MHz With 1 flash wait state 27
MCLK, CPUCLK, ULPCLK frequency fMCLK 24 MHz With 0 flash wait states 27
Supply current in SLEEP, CPU halted IDDSLEEP 1594 1730 uA VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, -40°C 28
Supply current in SLEEP, CPU halted IDDSLEEP 1656 1920 uA VDD=3.3V, MCLK=SYSOSC, CPU is halted, 32MHz, 125°C 28
Supply current in STOP0 IDDSTOP0 698 760 uA VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, -40°C 28
Supply current in STOP0 IDDSTOP0 721 795 uA VDD=3.3V, SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, 125°C 28
Supply current in STOP1 IDDSTOP1 232 255 uA VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, -40°C 28
Supply current in STOP1 IDDSTOP1 257 290 uA VDD=3.3V, SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, ULPCLK 4MHz, 125°C 28
Supply current in STOP2 IDDSTOP2 51 60 uA VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, -40°C 28
Supply current in STOP2 IDDSTOP2 70 92 uA VDD=3.3V, SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, 125°C 28
Supply current in STANDBY0 IDDSTBY0 1.7 2 uA VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, -40°C 28
Supply current in STANDBY0 IDDSTBY0 14 31 uA VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, 125°C 28
Supply current in STANDBY1 IDDSTBY1 1.4 1.7 uA VDD=3.3V, LFCLK=LFOSC, STOPCLKSTBY=1, RTC enabled, -40°C 28
Supply current in SHUTDOWN IDDSHDN 57 75 nA VDD=3.3V, all inputs tied to 0V or VDD, -40°C 28
High level input voltage, ODIO VIH 2 5.5 V ODIO, VDD≥2.7V 33
Low level input voltage, ODIO VIL -0.3 0.8 V ODIO, VDD≥2.7V 33
High-Z leakage current, SDIO (except PB24) Ilkg 50 nA 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 125 °C 33
Low level output voltage, SDIO VOL 0.4 V VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 25 °C 35
Low level output voltage, SDIO VOL 0.45 V VDD≥2.7V, /IIO/,max=6mA, -40 °C ≤ Ta ≤ 125 °C 35
Low level output voltage, ODIO VOL 0.4 V VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C 35
Low level output voltage, ODIO VOL 0.45 V VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C 35
Supply Monitor voltage divider (VDD/3) accuracy VSupplyMon -1.5 1.5 % ADC input channel: Supply Monitor 37
Integral linearity error (INL) EI -2 2 LSB External reference 38
Differential linearity error (DNL) ED -1 1 LSB Guaranteed no missing codes; External reference 38
Offset error EO -3.5 3.5 mV External reference 38
Gain error EG -4 4 LSB External reference 38
Factory trim temperature TSTRIM 27 30 33 °C ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=2h (VREF=1.4V), ADC tSample=12.5µs 38
Temperature sensor temperature coefficient TSc -2.05 -1.9 -1.75 mV/℃ -40℃ ≤ Tj ≤ 130℃ 38
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 39
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 39
VREF operating supply current IVREF 80 100 µA BUFCONFIG = {0, 1}, No load 39
SYSOSC accuracy, FCL enabled, internal ROSC fSYSOSC -0.8 1.3 % SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC assumed 32
LFOSC accuracy fLFOSC -5 5 % -40 ℃ ≤ Ta ≤ 125 ℃ 33
Program and erase supply voltage VDDPGM/ERASE 1.62 3.6 V 30
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V Rising 29
SYSOSC accuracy, FCL disabled, 32MHz fSYSOSC -2.6 1.8 % SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ 32
Thermal resistance, junction-to-ambient RθJA 35.2 °C/W VQFN-32 (RHB) 27
Thermal resistance, junction-to-case (top) RθJC(top) 27.8 °C/W VQFN-32 (RHB) 27
Thermal resistance, junction-to-board RθJB 16.2 °C/W VQFN-32 (RHB) 27
Junction-to-top characterization parameter ΨJT 0.7 °C/W VQFN-32 (RHB) 27
Junction-to-board characterization parameter ΨJB 16.1 °C/W VQFN-32 (RHB) 27
Thermal resistance, junction-to-case (bottom) RθJC(bot) 6.3 °C/W VQFN-32 (RHB) 27

CAD (KiCad official)

  • Symbol: MSPM0L1116SRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: mspm0l1116srhbr-etched.step / mspm0l1116srhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mspm0l1116srhbr.step / mspm0l1116srhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 bf02c1ee12b515f7, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF