main
Ray
Publish 0.1.0
d36a41c
MSPM0G3507SRHBR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)
MSPM0G3507SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SDA and also FCC_IN, and it needs an external pullup when used as an output high for I2C or UART. |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SCL, and it needs an external pullup when used as an output high for I2C or UART. |
| 3 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to release from reset and start the boot process. |
| 4 | VDD | power_in | Power supply, 1.62 V to 3.6 V, decoupled with a 10 uF capacitor and a 0.1 uF capacitor to VSS. |
| 5 | VSS | power_in | Ground supply; the QFN exposed thermal pad is also recommended to be connected to VSS. |
| 6 | PA2 | bidirectional | Standard I/O that doubles as the ROSC pin, which needs a 100 kOhm 0.1% resistor to VSS when the SYSOSC frequency correction loop is used, and can be used as a digital I/O otherwise. |
| 7 | PA3 | bidirectional | Standard I/O that doubles as the LFXIN input for the 32 kHz low-frequency crystal oscillator (LFXT). |
| 8 | PA4 | bidirectional | Standard I/O that doubles as the LFXOUT output for the 32 kHz low-frequency crystal oscillator and the LFCLK_IN digital clock input. |
| 9 | PA5 | bidirectional | Standard I/O that doubles as the HFXIN input for the 4 MHz to 48 MHz high-frequency crystal oscillator (HFXT) and FCC_IN. |
| 10 | PA6 | bidirectional | Standard I/O that doubles as the HFXOUT output for the high-frequency crystal oscillator (HFXT) and the HFCLK_IN digital clock input. |
| 11 | PA7 | bidirectional | Standard general-purpose I/O that doubles as CLK_OUT and COMP0_OUT. |
| 12 | PA8 | bidirectional | Standard general-purpose I/O with UART1_TX, SPI0_CS0, UART0_RTS and timer alternate functions. |
| 13 | PA9 | bidirectional | High-speed general-purpose I/O that doubles as RTC_OUT and CLK_OUT and UART1_RX. |
| 14 | PA10 | bidirectional | High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_TX and also CLK_OUT. |
| 15 | PA11 | bidirectional | High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_RX and also COMP0_OUT. |
| 16 | PA12 | bidirectional | High-speed general-purpose I/O that doubles as FCC_IN, CAN_TX and UART3_CTS. |
| 17 | PA13 | bidirectional | High-speed general-purpose I/O that doubles as CAN_RX and UART3_RTS. |
| 18 | PA14 | bidirectional | High-speed general-purpose I/O that doubles as ADC0 analog input A0_12 (COMP0_IN2+) and CLK_OUT. |
| 19 | PA15 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_0 and DAC_OUT; avoid external circuitry on this pin when DAC_OUT is used. |
| 20 | PA16 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_1 and OPA1_OUT, and FCC_IN. |
| 21 | PA17 | bidirectional | Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_2 and OPA1_IN1-. |
| 22 | PA18 | bidirectional | Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_3 and OPA1_IN1+; default BSL_Invoke. |
| 23 | PA19 | bidirectional | High-speed general-purpose I/O that doubles as the serial wire debug data pin SWDIO. |
| 24 | PA20 | bidirectional | Standard general-purpose I/O that doubles as the serial wire debug clock input SWCLK. |
| 25 | PA21 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_7, COMP2_IN1- and VREF-; it has an internal test connection and no injection current is allowed on it. |
| 26 | PA22 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_7, GPAMP_OUT and OPA0_OUT. |
| 27 | PA23 | bidirectional | Standard general-purpose I/O that doubles as the VREF+ external voltage reference input or internal reference output and COMP1_IN1-. |
| 28 | PA24 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_3 and OPA0_IN1-. |
| 29 | PA25 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_2 and OPA0_IN1+. |
| 30 | PA26 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+. |
| 31 | PA27 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_0, COMP0_IN0-, OPA0_IN0- and RTC_OUT. |
| 32 | VCORE | power_out | Regulated core power supply output that requires a 0.47 uF tank capacitor to VSS and must not be supplied or loaded externally. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 4.1 | V | At VDD pin | 25 | |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 25 | |
| Input voltage, common tolerance pins | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; table prints VDD + 0.3 (4.1 MAX) | 25 | |
| Current into VDD pin (source) | IVDD | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 25 | ||
| Current into VDD pin (source) | IVDD | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 25 | ||
| Current out of VSS pin (sink) | IVSS | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 25 | ||
| Current out of VSS pin (sink) | IVSS | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 25 | ||
| Current of SDIO pin | IIO | 6 | mA | Current sunk or sourced by SDIO pin | 25 | ||
| Current of HSIO pin | IIO | 6 | mA | Current sunk or sourced by HSIO pin | 25 | ||
| Current of HDIO pin | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 25 | ||
| Current of ODIO pin | IIO | 20 | mA | Current sunk by ODIO pin | 25 | ||
| Supported diode current | ID | -2 | 2 | mA | Diode current at any device pin | 25 | |
| Ambient temperature | TA | -40 | 125 | °C | Ambient temperature | 25 | |
| Junction temperature | TJ | -40 | 130 | °C | Junction temperature | 25 | |
| Storage temperature | Tstg | -40 | 150 | °C | 25 | ||
| Supply voltage | VDD | 1.62 | 3.6 | V | 25 | ||
| Voltage on VCORE pin | VCORE | 1.35 | V | 25 | |||
| Capacitor connected between VDD and VSS | CVDD | 10 | uF | 25 | |||
| Capacitor connected between VCORE and VSS | CVCORE | 470 | nF | 25 | |||
| Ambient temperature, S version | TA | -40 | 125 | °C | 25 | ||
| Max junction temperature, S version | TJ | 130 | °C | 25 | |||
| MCLK, CPUCLK frequency with 2 flash wait states | fMCLK | 80 | MHz | 26 | |||
| MCLK, CPUCLK frequency with 1 flash wait state | fMCLK | 48 | MHz | 26 | |||
| MCLK, CPUCLK frequency with 0 flash wait states | fMCLK | 24 | MHz | 26 | |||
| ULPCLK frequency | fULPCLK | 40 | MHz | 26 | |||
| Junction-to-ambient thermal resistance (VQFN-32 RHB) | RθJA | 32.1 | °C/W | 26 | |||
| Junction-to-case (top) thermal resistance (VQFN-32 RHB) | RθJC(top) | 23.6 | °C/W | 26 | |||
| Junction-to-board thermal resistance (VQFN-32 RHB) | RθJB | 13 | °C/W | 26 | |||
| Junction-to-case (bottom) thermal resistance (VQFN-32 RHB) | RθJC(bot) | 3.3 | °C/W | 26 | |||
| External resistor between ROSC pin and VSS | ROSC | 100 | kΩ | SETUSEFCL=1 | 33 | ||
| ROSC resistor reference accuracy | ROSC | -0.1 | 0.1 | % | ±0.1% ±25ppm ROSC reference point | 33 | |
| High level input voltage, ODIO | VIH | 2 | 5.5 | V | VDD≥2.7V | 35 | |
| Low level input voltage, ODIO | VIL | -0.3 | 0.8 | V | VDD≥2.7V | 35 | |
| Pull up resistance | RPU | 40 | kΩ | All I/O except ODIO | 35 | ||
| Pull down resistance | RPD | 40 | kΩ | 35 | |||
| Input capacitance | CI | 5 | pF | 35 | |||
| Low level output voltage, ODIO | VOL | 0.4 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C | 37 | ||
| Low level output voltage, ODIO | VOL | 0.45 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C | 37 | ||
| Port output frequency, SDIO | fmax | 32 | MHz | VDD ≥ 2.7V, CL= 20pF | 38 | ||
| ADC sample-and-hold capacitance | CS/H | 3.3 | pF | 39 | |||
| ADC input resistance | Rin | 0.5 | kΩ | 39 | |||
| Integral linearity error (INL) | EI | -2 | 2 | LSB | External reference | 40 | |
| Differential linearity error (DNL) | ED | -1 | 1 | LSB | Guaranteed no missing codes, external reference | 40 | |
| Offset error | EO | -5 | 5 | mV | Internal or external reference | 40 | |
| Gain error | EG | -4 | 4 | LSB | External reference | 40 | |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | ℃ | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=0h (VDD = 3.3V) | 41 |
| Temperature coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 41 |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 41 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 41 |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| Power-on reset voltage level, falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 29 |
| Input offset voltage | Voffset | -20 | 20 | mV | 42 | ||
| Input offset voltage, GPAMP | VOS | -9 | 0.2 | 9 | mV | Noninverting, unity gain, TA = 25℃, VDD = 3.3V, CHOP = 0x0 | 44 |
| Input offset voltage, OPA | VOS | -2 | 0.4 | 2 | mV | Noninverting, unity gain, VDD = 3.3V, TA = 25°C, CHOP = 0x0 | 45 |
| SYSOSC frequency accuracy with FCL enabled, internal ROSC, 32MHz | fSYSOSC | -0.8 | 1.3 | % | SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC | 32 | |
| LFOSC accuracy | fLFOSC | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 34 | |
| SPI clock frequency | fSPI | 32 | MHz | Clock max speed >= 64MHz, 2.7 < VDD < 3.6V, peripheral or controller with high speed IO | 48 | ||
| VDD slew rate, rising | dVDD/dt | 0.1 | V/us | Rising | 29 | ||
| DAC integral nonlinearity, 12-bit | INL | -4 | 4 | LSB | 43 | ||
| SYSPLL VCO output frequency | fVCO | 80 | 400 | MHz | 33 | ||
| I2C tLOW, standard mode | tLOW | 4.7 | us | Standard mode | 47 | ||
| UART input clock frequency, power domain 1 | fUART | 80 | MHz | UART in Power Domain1 | 50 | ||
| Input capacitance of ADC | CI | 5 | pF | 35 |
CAD (KiCad official)
- Symbol:
MSPM0G3507SRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
mspm0g3507srhbr-etched.step/mspm0g3507srhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g3507srhbr.step/mspm0g3507srhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (120 pp, sha256
0cba2418fd28709c, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSPM0G3507SRHBR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)
MSPM0G3507SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SDA and also FCC_IN, and it needs an external pullup when used as an output high for I2C or UART. |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SCL, and it needs an external pullup when used as an output high for I2C or UART. |
| 3 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to release from reset and start the boot process. |
| 4 | VDD | power_in | Power supply, 1.62 V to 3.6 V, decoupled with a 10 uF capacitor and a 0.1 uF capacitor to VSS. |
| 5 | VSS | power_in | Ground supply; the QFN exposed thermal pad is also recommended to be connected to VSS. |
| 6 | PA2 | bidirectional | Standard I/O that doubles as the ROSC pin, which needs a 100 kOhm 0.1% resistor to VSS when the SYSOSC frequency correction loop is used, and can be used as a digital I/O otherwise. |
| 7 | PA3 | bidirectional | Standard I/O that doubles as the LFXIN input for the 32 kHz low-frequency crystal oscillator (LFXT). |
| 8 | PA4 | bidirectional | Standard I/O that doubles as the LFXOUT output for the 32 kHz low-frequency crystal oscillator and the LFCLK_IN digital clock input. |
| 9 | PA5 | bidirectional | Standard I/O that doubles as the HFXIN input for the 4 MHz to 48 MHz high-frequency crystal oscillator (HFXT) and FCC_IN. |
| 10 | PA6 | bidirectional | Standard I/O that doubles as the HFXOUT output for the high-frequency crystal oscillator (HFXT) and the HFCLK_IN digital clock input. |
| 11 | PA7 | bidirectional | Standard general-purpose I/O that doubles as CLK_OUT and COMP0_OUT. |
| 12 | PA8 | bidirectional | Standard general-purpose I/O with UART1_TX, SPI0_CS0, UART0_RTS and timer alternate functions. |
| 13 | PA9 | bidirectional | High-speed general-purpose I/O that doubles as RTC_OUT and CLK_OUT and UART1_RX. |
| 14 | PA10 | bidirectional | High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_TX and also CLK_OUT. |
| 15 | PA11 | bidirectional | High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_RX and also COMP0_OUT. |
| 16 | PA12 | bidirectional | High-speed general-purpose I/O that doubles as FCC_IN, CAN_TX and UART3_CTS. |
| 17 | PA13 | bidirectional | High-speed general-purpose I/O that doubles as CAN_RX and UART3_RTS. |
| 18 | PA14 | bidirectional | High-speed general-purpose I/O that doubles as ADC0 analog input A0_12 (COMP0_IN2+) and CLK_OUT. |
| 19 | PA15 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_0 and DAC_OUT; avoid external circuitry on this pin when DAC_OUT is used. |
| 20 | PA16 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_1 and OPA1_OUT, and FCC_IN. |
| 21 | PA17 | bidirectional | Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_2 and OPA1_IN1-. |
| 22 | PA18 | bidirectional | Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_3 and OPA1_IN1+; default BSL_Invoke. |
| 23 | PA19 | bidirectional | High-speed general-purpose I/O that doubles as the serial wire debug data pin SWDIO. |
| 24 | PA20 | bidirectional | Standard general-purpose I/O that doubles as the serial wire debug clock input SWCLK. |
| 25 | PA21 | bidirectional | Standard general-purpose I/O that doubles as ADC1 analog input A1_7, COMP2_IN1- and VREF-; it has an internal test connection and no injection current is allowed on it. |
| 26 | PA22 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_7, GPAMP_OUT and OPA0_OUT. |
| 27 | PA23 | bidirectional | Standard general-purpose I/O that doubles as the VREF+ external voltage reference input or internal reference output and COMP1_IN1-. |
| 28 | PA24 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_3 and OPA0_IN1-. |
| 29 | PA25 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_2 and OPA0_IN1+. |
| 30 | PA26 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+. |
| 31 | PA27 | bidirectional | Standard general-purpose I/O that doubles as ADC0 analog input A0_0, COMP0_IN0-, OPA0_IN0- and RTC_OUT. |
| 32 | VCORE | power_out | Regulated core power supply output that requires a 0.47 uF tank capacitor to VSS and must not be supplied or loaded externally. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | | 4.1 | V | At VDD pin | 25 |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 25 |
| Input voltage, common tolerance pins | VI | -0.3 | | 4.1 | V | Applied to any common tolerance pins; table prints VDD + 0.3 (4.1 MAX) | 25 |
| Current into VDD pin (source) | IVDD | | | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 25 |
| Current into VDD pin (source) | IVDD | | | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 25 |
| Current out of VSS pin (sink) | IVSS | | | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 25 |
| Current out of VSS pin (sink) | IVSS | | | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 25 |
| Current of SDIO pin | IIO | | | 6 | mA | Current sunk or sourced by SDIO pin | 25 |
| Current of HSIO pin | IIO | | | 6 | mA | Current sunk or sourced by HSIO pin | 25 |
| Current of HDIO pin | IIO | | | 20 | mA | Current sunk or sourced by HDIO pin | 25 |
| Current of ODIO pin | IIO | | | 20 | mA | Current sunk by ODIO pin | 25 |
| Supported diode current | ID | -2 | | 2 | mA | Diode current at any device pin | 25 |
| Ambient temperature | TA | -40 | | 125 | °C | Ambient temperature | 25 |
| Junction temperature | TJ | -40 | | 130 | °C | Junction temperature | 25 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 25 |
| Supply voltage | VDD | 1.62 | | 3.6 | V | | 25 |
| Voltage on VCORE pin | VCORE | | 1.35 | | V | | 25 |
| Capacitor connected between VDD and VSS | CVDD | | 10 | | uF | | 25 |
| Capacitor connected between VCORE and VSS | CVCORE | | 470 | | nF | | 25 |
| Ambient temperature, S version | TA | -40 | | 125 | °C | | 25 |
| Max junction temperature, S version | TJ | | | 130 | °C | | 25 |
| MCLK, CPUCLK frequency with 2 flash wait states | fMCLK | | | 80 | MHz | | 26 |
| MCLK, CPUCLK frequency with 1 flash wait state | fMCLK | | | 48 | MHz | | 26 |
| MCLK, CPUCLK frequency with 0 flash wait states | fMCLK | | | 24 | MHz | | 26 |
| ULPCLK frequency | fULPCLK | | | 40 | MHz | | 26 |
| Junction-to-ambient thermal resistance (VQFN-32 RHB) | RθJA | | 32.1 | | °C/W | | 26 |
| Junction-to-case (top) thermal resistance (VQFN-32 RHB) | RθJC(top) | | 23.6 | | °C/W | | 26 |
| Junction-to-board thermal resistance (VQFN-32 RHB) | RθJB | | 13 | | °C/W | | 26 |
| Junction-to-case (bottom) thermal resistance (VQFN-32 RHB) | RθJC(bot) | | 3.3 | | °C/W | | 26 |
| External resistor between ROSC pin and VSS | ROSC | | 100 | | kΩ | SETUSEFCL=1 | 33 |
| ROSC resistor reference accuracy | ROSC | -0.1 | | 0.1 | % | ±0.1% ±25ppm ROSC reference point | 33 |
| High level input voltage, ODIO | VIH | 2 | | 5.5 | V | VDD≥2.7V | 35 |
| Low level input voltage, ODIO | VIL | -0.3 | | 0.8 | V | VDD≥2.7V | 35 |
| Pull up resistance | RPU | | 40 | | kΩ | All I/O except ODIO | 35 |
| Pull down resistance | RPD | | 40 | | kΩ | | 35 |
| Input capacitance | CI | | 5 | | pF | | 35 |
| Low level output voltage, ODIO | VOL | | | 0.4 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C | 37 |
| Low level output voltage, ODIO | VOL | | | 0.45 | V | VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C | 37 |
| Port output frequency, SDIO | fmax | | | 32 | MHz | VDD ≥ 2.7V, CL= 20pF | 38 |
| ADC sample-and-hold capacitance | CS/H | | 3.3 | | pF | | 39 |
| ADC input resistance | Rin | | 0.5 | | kΩ | | 39 |
| Integral linearity error (INL) | EI | -2 | | 2 | LSB | External reference | 40 |
| Differential linearity error (DNL) | ED | -1 | | 1 | LSB | Guaranteed no missing codes, external reference | 40 |
| Offset error | EO | -5 | | 5 | mV | Internal or external reference | 40 |
| Gain error | EG | -4 | | 4 | LSB | External reference | 40 |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | ℃ | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=0h (VDD = 3.3V) | 41 |
| Temperature coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 41 |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 41 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 41 |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| Power-on reset voltage level, falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 29 |
| Input offset voltage | Voffset | -20 | | 20 | mV | | 42 |
| Input offset voltage, GPAMP | VOS | -9 | 0.2 | 9 | mV | Noninverting, unity gain, TA = 25℃, VDD = 3.3V, CHOP = 0x0 | 44 |
| Input offset voltage, OPA | VOS | -2 | 0.4 | 2 | mV | Noninverting, unity gain, VDD = 3.3V, TA = 25°C, CHOP = 0x0 | 45 |
| SYSOSC frequency accuracy with FCL enabled, internal ROSC, 32MHz | fSYSOSC | -0.8 | | 1.3 | % | SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC | 32 |
| LFOSC accuracy | fLFOSC | -5 | | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 34 |
| SPI clock frequency | fSPI | | | 32 | MHz | Clock max speed >= 64MHz, 2.7 < VDD < 3.6V, peripheral or controller with high speed IO | 48 |
| VDD slew rate, rising | dVDD/dt | 0.1 | | | V/us | Rising | 29 |
| DAC integral nonlinearity, 12-bit | INL | -4 | | 4 | LSB | | 43 |
| SYSPLL VCO output frequency | fVCO | 80 | | 400 | MHz | | 33 |
| I2C tLOW, standard mode | tLOW | 4.7 | | | us | Standard mode | 47 |
| UART input clock frequency, power domain 1 | fUART | | | 80 | MHz | UART in Power Domain1 | 50 |
| Input capacitance of ADC | CI | | 5 | | pF | | 35 |
## CAD (KiCad official)
- Symbol: `MSPM0G3507SRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `mspm0g3507srhbr-etched.step` / `mspm0g3507srhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0g3507srhbr.step` / `mspm0g3507srhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/mspm0g3507.pdf) (120 pp, sha256 `0cba2418fd28709c`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mspm0g3507srhbr-datasheet.pdf)