main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mspm0g3507srhbr: viewers · Ray
mspm0g3507srhbr-etched.glb mspm0g3507srhbr: factory component page (tier=mfr) · Ray
mspm0g3507srhbr-etched.step mspm0g3507srhbr: factory component page (tier=mfr) · Ray
mspm0g3507srhbr-hero.glb mspm0g3507srhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
mspm0g3507srhbr-hero.overlay.json mspm0g3507srhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
mspm0g3507srhbr.glb Publish 0.1.0 · Ray
mspm0g3507srhbr.kicad_mod Publish 0.1.0 · Ray
mspm0g3507srhbr.kicad_sym Publish 0.1.0 · Ray
mspm0g3507srhbr.lbr Publish 0.1.0 · Ray
mspm0g3507srhbr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

MSPM0G3507SRHBR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)

MSPM0G3507SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SDA and also FCC_IN, and it needs an external pullup when used as an output high for I2C or UART.
2 PA1 bidirectional 5V-tolerant open-drain general-purpose I/O with wake from SHUTDOWN; default BSL I2C_SCL, and it needs an external pullup when used as an output high for I2C or UART.
3 NRST input Active-low reset input that must be pulled high to VDD for the device to release from reset and start the boot process.
4 VDD power_in Power supply, 1.62 V to 3.6 V, decoupled with a 10 uF capacitor and a 0.1 uF capacitor to VSS.
5 VSS power_in Ground supply; the QFN exposed thermal pad is also recommended to be connected to VSS.
6 PA2 bidirectional Standard I/O that doubles as the ROSC pin, which needs a 100 kOhm 0.1% resistor to VSS when the SYSOSC frequency correction loop is used, and can be used as a digital I/O otherwise.
7 PA3 bidirectional Standard I/O that doubles as the LFXIN input for the 32 kHz low-frequency crystal oscillator (LFXT).
8 PA4 bidirectional Standard I/O that doubles as the LFXOUT output for the 32 kHz low-frequency crystal oscillator and the LFCLK_IN digital clock input.
9 PA5 bidirectional Standard I/O that doubles as the HFXIN input for the 4 MHz to 48 MHz high-frequency crystal oscillator (HFXT) and FCC_IN.
10 PA6 bidirectional Standard I/O that doubles as the HFXOUT output for the high-frequency crystal oscillator (HFXT) and the HFCLK_IN digital clock input.
11 PA7 bidirectional Standard general-purpose I/O that doubles as CLK_OUT and COMP0_OUT.
12 PA8 bidirectional Standard general-purpose I/O with UART1_TX, SPI0_CS0, UART0_RTS and timer alternate functions.
13 PA9 bidirectional High-speed general-purpose I/O that doubles as RTC_OUT and CLK_OUT and UART1_RX.
14 PA10 bidirectional High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_TX and also CLK_OUT.
15 PA11 bidirectional High-drive general-purpose I/O with wake from SHUTDOWN; default BSL UART_RX and also COMP0_OUT.
16 PA12 bidirectional High-speed general-purpose I/O that doubles as FCC_IN, CAN_TX and UART3_CTS.
17 PA13 bidirectional High-speed general-purpose I/O that doubles as CAN_RX and UART3_RTS.
18 PA14 bidirectional High-speed general-purpose I/O that doubles as ADC0 analog input A0_12 (COMP0_IN2+) and CLK_OUT.
19 PA15 bidirectional Standard general-purpose I/O that doubles as ADC1 analog input A1_0 and DAC_OUT; avoid external circuitry on this pin when DAC_OUT is used.
20 PA16 bidirectional Standard general-purpose I/O that doubles as ADC1 analog input A1_1 and OPA1_OUT, and FCC_IN.
21 PA17 bidirectional Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_2 and OPA1_IN1-.
22 PA18 bidirectional Standard general-purpose I/O with wake from SHUTDOWN that doubles as ADC1 analog input A1_3 and OPA1_IN1+; default BSL_Invoke.
23 PA19 bidirectional High-speed general-purpose I/O that doubles as the serial wire debug data pin SWDIO.
24 PA20 bidirectional Standard general-purpose I/O that doubles as the serial wire debug clock input SWCLK.
25 PA21 bidirectional Standard general-purpose I/O that doubles as ADC1 analog input A1_7, COMP2_IN1- and VREF-; it has an internal test connection and no injection current is allowed on it.
26 PA22 bidirectional Standard general-purpose I/O that doubles as ADC0 analog input A0_7, GPAMP_OUT and OPA0_OUT.
27 PA23 bidirectional Standard general-purpose I/O that doubles as the VREF+ external voltage reference input or internal reference output and COMP1_IN1-.
28 PA24 bidirectional Standard general-purpose I/O that doubles as ADC0 analog input A0_3 and OPA0_IN1-.
29 PA25 bidirectional Standard general-purpose I/O that doubles as ADC0 analog input A0_2 and OPA0_IN1+.
30 PA26 bidirectional Standard general-purpose I/O that doubles as ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+.
31 PA27 bidirectional Standard general-purpose I/O that doubles as ADC0 analog input A0_0, COMP0_IN0-, OPA0_IN0- and RTC_OUT.
32 VCORE power_out Regulated core power supply output that requires a 0.47 uF tank capacitor to VSS and must not be supplied or loaded externally.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 4.1 V At VDD pin 25
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 25
Input voltage, common tolerance pins VI -0.3 4.1 V Applied to any common tolerance pins; table prints VDD + 0.3 (4.1 MAX) 25
Current into VDD pin (source) IVDD 80 mA -40℃ ≤ Tj ≤ 130℃ 25
Current into VDD pin (source) IVDD 100 mA -40℃ ≤ Tj ≤ 90℃ 25
Current out of VSS pin (sink) IVSS 80 mA -40℃ ≤ Tj ≤ 130℃ 25
Current out of VSS pin (sink) IVSS 100 mA -40℃ ≤ Tj ≤ 90℃ 25
Current of SDIO pin IIO 6 mA Current sunk or sourced by SDIO pin 25
Current of HSIO pin IIO 6 mA Current sunk or sourced by HSIO pin 25
Current of HDIO pin IIO 20 mA Current sunk or sourced by HDIO pin 25
Current of ODIO pin IIO 20 mA Current sunk by ODIO pin 25
Supported diode current ID -2 2 mA Diode current at any device pin 25
Ambient temperature TA -40 125 °C Ambient temperature 25
Junction temperature TJ -40 130 °C Junction temperature 25
Storage temperature Tstg -40 150 °C 25
Supply voltage VDD 1.62 3.6 V 25
Voltage on VCORE pin VCORE 1.35 V 25
Capacitor connected between VDD and VSS CVDD 10 uF 25
Capacitor connected between VCORE and VSS CVCORE 470 nF 25
Ambient temperature, S version TA -40 125 °C 25
Max junction temperature, S version TJ 130 °C 25
MCLK, CPUCLK frequency with 2 flash wait states fMCLK 80 MHz 26
MCLK, CPUCLK frequency with 1 flash wait state fMCLK 48 MHz 26
MCLK, CPUCLK frequency with 0 flash wait states fMCLK 24 MHz 26
ULPCLK frequency fULPCLK 40 MHz 26
Junction-to-ambient thermal resistance (VQFN-32 RHB) RθJA 32.1 °C/W 26
Junction-to-case (top) thermal resistance (VQFN-32 RHB) RθJC(top) 23.6 °C/W 26
Junction-to-board thermal resistance (VQFN-32 RHB) RθJB 13 °C/W 26
Junction-to-case (bottom) thermal resistance (VQFN-32 RHB) RθJC(bot) 3.3 °C/W 26
External resistor between ROSC pin and VSS ROSC 100 kΩ SETUSEFCL=1 33
ROSC resistor reference accuracy ROSC -0.1 0.1 % ±0.1% ±25ppm ROSC reference point 33
High level input voltage, ODIO VIH 2 5.5 V VDD≥2.7V 35
Low level input voltage, ODIO VIL -0.3 0.8 V VDD≥2.7V 35
Pull up resistance RPU 40 kΩ All I/O except ODIO 35
Pull down resistance RPD 40 kΩ 35
Input capacitance CI 5 pF 35
Low level output voltage, ODIO VOL 0.4 V VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 25 °C 37
Low level output voltage, ODIO VOL 0.45 V VDD≥2.7V, IOL,max=8mA, -40 °C ≤ Ta ≤ 125 °C 37
Port output frequency, SDIO fmax 32 MHz VDD ≥ 2.7V, CL= 20pF 38
ADC sample-and-hold capacitance CS/H 3.3 pF 39
ADC input resistance Rin 0.5 kΩ 39
Integral linearity error (INL) EI -2 2 LSB External reference 40
Differential linearity error (DNL) ED -1 1 LSB Guaranteed no missing codes, external reference 40
Offset error EO -5 5 mV Internal or external reference 40
Gain error EG -4 4 LSB External reference 40
Factory trim temperature TSTRIM 27 30 33 ℃ ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=0h (VDD = 3.3V) 41
Temperature coefficient TSc -2.1 -1.8 -1.7 mV/℃ -40℃ ≤ Tj ≤ 130℃ 41
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 41
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 41
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V Rising 29
Power-on reset voltage level, falling VPOR- 0.9 1.25 1.54 V Falling 29
Input offset voltage Voffset -20 20 mV 42
Input offset voltage, GPAMP VOS -9 0.2 9 mV Noninverting, unity gain, TA = 25℃, VDD = 3.3V, CHOP = 0x0 44
Input offset voltage, OPA VOS -2 0.4 2 mV Noninverting, unity gain, VDD = 3.3V, TA = 25°C, CHOP = 0x0 45
SYSOSC frequency accuracy with FCL enabled, internal ROSC, 32MHz fSYSOSC -0.8 1.3 % SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃, ideal ROSC 32
LFOSC accuracy fLFOSC -5 5 % -40 ℃ ≤ Ta ≤ 125 ℃ 34
SPI clock frequency fSPI 32 MHz Clock max speed >= 64MHz, 2.7 < VDD < 3.6V, peripheral or controller with high speed IO 48
VDD slew rate, rising dVDD/dt 0.1 V/us Rising 29
DAC integral nonlinearity, 12-bit INL -4 4 LSB 43
SYSPLL VCO output frequency fVCO 80 400 MHz 33
I2C tLOW, standard mode tLOW 4.7 us Standard mode 47
UART input clock frequency, power domain 1 fUART 80 MHz UART in Power Domain1 50
Input capacitance of ADC CI 5 pF 35

CAD (KiCad official)

  • Symbol: MSPM0G3507SRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: mspm0g3507srhbr-etched.step / mspm0g3507srhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mspm0g3507srhbr.step / mspm0g3507srhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (120 pp, sha256 0cba2418fd28709c, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF