MSPM0G3107SRHBR

{
  "schema_version": 1,
  "type": "component",
  "slug": "mspm0g3107srhbr",
  "title": "MSPM0G3107SRHBR",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mspm0g3107srhbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MSPM0G3107SRHBR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32(5x5)",
    "pin_count": 33,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8555053957763993600",
    "parts": {
      "symbol": "mspm0g3107srhbr.kicad_sym",
      "footprint": "mspm0g3107srhbr.kicad_mod",
      "model_3d": "mspm0g3107srhbr-hero.glb",
      "model_3d_plain": "mspm0g3107srhbr.glb",
      "model_3d_step": "mspm0g3107srhbr-etched.step",
      "model_3d_step_plain": "mspm0g3107srhbr.step",
      "lbr": "mspm0g3107srhbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C22362620",
      "digikey": "296-MSPM0G3107SRHBRTR-ND",
      "mouser": "595-MSPM0G3107SRHBR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:22:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-MSPM0G3107SRHBRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MSPM0G3107SRHBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PA0",
        "type": "bidirectional",
        "description": "5 V tolerant open-drain general-purpose I/O (UART0_TX, I2C0_SDA, FCC_IN, among others) that can wake the device from SHUTDOWN; an external pull-up is required for output high."
      },
      {
        "number": "2",
        "name": "PA1",
        "type": "bidirectional",
        "description": "5 V tolerant open-drain general-purpose I/O (UART0_RX, I2C0_SCL, among others) that can wake the device from SHUTDOWN; an external pull-up is required for output high."
      },
      {
        "number": "3",
        "name": "NRST",
        "type": "input",
        "description": "Active-low reset input that must be pulled up to VDD for the device to leave reset and start; TI recommends a 47 kΩ pull-up with a 10 nF capacitor."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Device supply voltage, recommended range 1.62 V to 3.6 V (absolute maximum -0.3 V to 4.1 V), with a 10 µF and 0.1 µF low-ESR decoupling capacitor pair placed close to the pin."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply pin for the device, to which the VDD decoupling capacitors and the VCORE capacitor return."
      },
      {
        "number": "6",
        "name": "PA2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that is also the ROSC pin; when the SYSOSC frequency correction loop is used, a 100 kΩ ±0.1% (±25 ppm) resistor must be connected from this pin to VSS."
      },
      {
        "number": "7",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose I/O that also serves as the LFXT low-frequency crystal input (LFXIN, 32.768 kHz)."
      },
      {
        "number": "8",
        "name": "PA4",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose I/O that also serves as the LFXT crystal output (LFXOUT) or the digital LFCLK_IN input (29.491 kHz to 36.045 kHz)."
      },
      {
        "number": "9",
        "name": "PA5",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose I/O that also serves as the HFXT high-frequency crystal input (HFXIN, 4 MHz to 48 MHz depending on HFXTRSEL) and FCC_IN."
      },
      {
        "number": "10",
        "name": "PA6",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose I/O that also serves as the HFXT crystal output (HFXOUT) or the digital HFCLK_IN input (4 MHz to 48 MHz)."
      },
      {
        "number": "11",
        "name": "PA7",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that can also be configured as a clock output (CLK_OUT) and timer channels."
      },
      {
        "number": "12",
        "name": "PA8",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O with UART1, SPI0, UART0 and TIMA alternate functions."
      },
      {
        "number": "13",
        "name": "PA9",
        "type": "bidirectional",
        "description": "High-speed general-purpose digital I/O (HSIO) with UART1, SPI0, RTC_OUT and CLK_OUT alternate functions; output frequency up to 40 MHz at DRV=1 with VDD ≥ 2.7 V and 20 pF load."
      },
      {
        "number": "14",
        "name": "PA10",
        "type": "bidirectional",
        "description": "High-drive general-purpose I/O (HDIO) that can wake the device from SHUTDOWN, with an absolute maximum sink or source current of 20 mA."
      },
      {
        "number": "15",
        "name": "PA11",
        "type": "bidirectional",
        "description": "High-drive general-purpose I/O (HDIO) that can wake the device from SHUTDOWN, with an absolute maximum sink or source current of 20 mA."
      },
      {
        "number": "16",
        "name": "PA12",
        "type": "bidirectional",
        "description": "High-speed general-purpose digital I/O with UART3, SPI0, CAN_TX, TIMG0 and FCC_IN alternate functions."
      },
      {
        "number": "17",
        "name": "PA13",
        "type": "bidirectional",
        "description": "High-speed general-purpose digital I/O with UART3, SPI0, CAN_RX, TIMG0 and TIMA0 alternate functions."
      },
      {
        "number": "18",
        "name": "PA14",
        "type": "bidirectional",
        "description": "High-speed general-purpose digital I/O that also serves as ADC0 analog input channel 12 (A0_12), with UART0, SPI0, UART3 and CLK_OUT alternate functions."
      },
      {
        "number": "19",
        "name": "PA15",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC1 analog input channel 0 (A1_0), with UART0, SPI1, I2C1 and timer alternate functions."
      },
      {
        "number": "20",
        "name": "PA16",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC1 analog input channel 1 (A1_1), with SPI1, I2C1, timer and FCC_IN alternate functions."
      },
      {
        "number": "21",
        "name": "PA17",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O with shutdown wake-up capability that also serves as ADC1 analog input channel 2 (A1_2), with UART1, SPI1 and I2C1 alternate functions."
      },
      {
        "number": "22",
        "name": "PA18",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O with shutdown wake-up capability that also serves as ADC1 analog input channel 3 (A1_3) and the GPAMP inverting input (GPAMP_IN-)."
      },
      {
        "number": "23",
        "name": "PA19",
        "type": "bidirectional",
        "description": "High-speed general-purpose I/O that carries the serial wire debug data signal SWDIO (bidirectional, shared)."
      },
      {
        "number": "24",
        "name": "PA20",
        "type": "input",
        "description": "Standard-drive general-purpose I/O that carries the serial wire debug clock input SWCLK from the debug probe."
      },
      {
        "number": "25",
        "name": "PA21",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC1 analog input channel 7 (A1_7) and the VREF- external reference or ground pin."
      },
      {
        "number": "26",
        "name": "PA22",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC0 analog input channel 7 (A0_7) and the GPAMP output (GPAMP_OUT)."
      },
      {
        "number": "27",
        "name": "PA23",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as the VREF+ voltage reference pin, for external reference input or internal reference output, which requires a decoupling capacitor (0.7 µF to 1.15 µF) to VREF-/GND."
      },
      {
        "number": "28",
        "name": "PA24",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC0 analog input channel 3 (A0_3), with UART2, SPI0 and timer alternate functions."
      },
      {
        "number": "29",
        "name": "PA25",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC0 analog input channel 2 (A0_2), with UART3, SPI1 and timer alternate functions."
      },
      {
        "number": "30",
        "name": "PA26",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC0 analog input channel 1 (A0_1) and the GPAMP non-inverting input (GPAMP_IN+)."
      },
      {
        "number": "31",
        "name": "PA27",
        "type": "bidirectional",
        "description": "Standard-drive general-purpose digital I/O that also serves as ADC0 analog input channel 0 (A0_0) and the RTC clock output (RTC_OUT)."
      },
      {
        "number": "32",
        "name": "VCORE",
        "type": "power_out",
        "description": "Regulated core supply output; a 0.47 µF capacitor must be connected close to the device between VCORE and VSS, and no external voltage or load may be applied to this pin."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad of the VQFN-32 package is not a numbered pin and is omitted from pins. The d; Pin numbers were taken from the RHB columns of Table 6-1 (pin attributes) and Table 6-3 (signal desc; Types for multi-function pins are set to bidirectional (GPIO I/O with analog or peripheral alternate",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 51,
        "cost_usd": 0.3245,
        "at": "2026-10-08T18:22:13"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8555053957763993600",
        "pages": 69,
        "sha256": "7c5df909316e74bc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mspm0g3107srhbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mspm0g3107srhbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8d190d0f66f5bd5632b16140f2780fa4c6e36ba4b60ef8cb22d0e46807ba5cb8",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-32(5x5)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "33"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mspm0g3107srhbr"
  ],
  "discovery_pitch": "MSPM0G3107SRHBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mspm0g3107srhbr.kicad_sym",
    "mspm0g3107srhbr.kicad_mod",
    "mspm0g3107srhbr.glb",
    "mspm0g3107srhbr.step",
    "mspm0g3107srhbr.lbr",
    "docs/hero.png",
    "docs/mspm0g3107srhbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mspm0g3107srhbr-hero.glb",
    "mspm0g3107srhbr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}