main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mspm0g1518srhbr: viewers · Ray
mspm0g1518srhbr-etched.glb Publish 0.1.0 · Ray
mspm0g1518srhbr-etched.step mspm0g1518srhbr: factory component page (tier=mfr) · Ray
mspm0g1518srhbr-hero.glb mspm0g1518srhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
mspm0g1518srhbr-hero.overlay.json Publish 0.1.0 · Ray
mspm0g1518srhbr.glb Publish 0.1.0 · Ray
mspm0g1518srhbr.kicad_mod Publish 0.1.0 · Ray
mspm0g1518srhbr.kicad_sym Publish 0.1.0 · Ray
mspm0g1518srhbr.lbr Publish 0.1.0 · Ray
mspm0g1518srhbr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

MSPM0G1518SRHBR

Texas Instruments · IC · VQFN-32(5x5)

MSPM0G1518SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional 5V-tolerant open-drain IO (ODIO, 20 mA maximum sink) that needs an external pullup to drive high for I2C or UART use, with UART0_TX, I2C0_SDA, TIMA0_C0 and BSLSDA (non-IOMUX) among its functions.
2 PA1 bidirectional 5V-tolerant open-drain IO (ODIO, 20 mA maximum sink) that needs an external pullup to drive high for I2C or UART use, with UART0_RX, I2C0_SCL, TIMA0_C1 and BSLSCL (non-IOMUX) among its functions.
3 NRST input Active-low reset input that must be pulled high to VDD for the device to start, with a 47 kΩ pullup and 10 nF pulldown recommended in the basic application schematic.
4 VDD power_in Supply voltage input, 1.62 V to 3.6 V, with a 10 µF bulk capacitor and 0.1 µF low-ESR ceramic decoupling capacitor recommended across VDD and VSS.
5 VSS power_in Ground reference for the device, with current out of VSS limited to 100 mA at Tj ≤ 90 °C (80 mA at Tj ≤ 130 °C).
6 PA2 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, which doubles as the ROSC analog pin for the SYSOSC frequency correction loop (100 kΩ ±0.1% resistor to VSS) and is free for digital IO when that loop is not used.
7 PA3 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with TIMG8_C0, SPI0_CS1, I2C1_SDA and COMP0_OUT among its functions and LFXIN (32 kHz crystal input) as a non-IOMUX analog function.
8 PA4 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with SPI0_POCI, I2C1_SCL, LFCLK_IN and UART1_RX among its functions and LFXOUT (32 kHz crystal output) as a non-IOMUX analog function.
9 PA5 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with SPI0_PICO, I2C1_SDA, UART0_CTS and FCC_IN among its functions and HFXIN (4-48 MHz crystal input) as a non-IOMUX analog function.
10 PA6 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with SPI0_SCK, I2C1_SCL, HFCLK_IN and UART0_RTS among its functions and HFXOUT (4-48 MHz crystal output) as a non-IOMUX analog function.
11 PA7 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with COMP0_OUT, CLK_OUT, FCC_IN and SPI0_POCI among its functions.
12 PA8 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART1_TX, SPI0_CS0, I2C0_SDA, HFCLK_IN and UART0_RTS among its functions.
13 PA9 bidirectional High-speed (HSIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART1_RX, SPI0_PICO, I2C0_SCL, CLK_OUT and RTC_OUT among its functions.
14 PA10 bidirectional High-drive (HDIO) IO with 20 mA maximum current, with UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT and SPI2_SCK among its functions and BSLTX (non-IOMUX) and WAKE as additional functions.
15 PA11 bidirectional High-drive (HDIO) IO with 20 mA maximum current, with UART0_RX, SPI0_SCK, I2C0_SCL, COMP0_OUT and TIMA1_C1 among its functions and BSLRX (non-IOMUX) and WAKE as additional functions.
16 PA12 bidirectional High-speed (HSIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART3_CTS, SPI0_SCK, COMP0_OUT, CAN0_TX and UART1_CTS among its functions and A0_8 (ADC0 channel 8) as a non-IOMUX analog function.
17 PA13 bidirectional High-speed (HSIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART3_RTS, SPI0_POCI, UART3_RX, RTC_OUT and CAN0_RX among its functions and A0_9 (ADC0 channel 9) and COMP0_IN2- as non-IOMUX analog functions.
18 PA14 bidirectional High-speed (HSIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART0_CTS, SPI0_PICO, UART3_TX, CLK_OUT and UART7_RX among its functions and A0_12 (ADC0 channel 12) and COMP0_IN2+ as non-IOMUX analog functions.
19 PA15 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART0_RTS, SPI1_CS2, I2C1_SCL and TIMA1_C0 among its functions, and A1_0 shared with DAC_OUT, where external circuitry on PA15 should be avoided when DAC_OUT is used.
20 PA16 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with COMP0_OUT, SPI1_POCI, I2C1_SDA, I2C2_SDA and COMP2_OUT among its functions and A1_1 (ADC1 channel 1) as a non-IOMUX analog function.
21 PA17 bidirectional Standard (SDIO) IO with wake capability (6 mA maximum current at VDD ≥ 2.7 V), with UART1_TX, SPI1_SCK, I2C1_SCL and TIMA0_C3 among its functions, and WAKE, A1_2 and COMP0_IN1- as non-IOMUX functions.
22 PA18 bidirectional Standard (SDIO) IO with wake capability (6 mA maximum current at VDD ≥ 2.7 V), with UART1_RX, SPI1_PICO, I2C1_SDA and TIMA0_C3N among its functions, and BSL_invoke, WAKE, A1_3 and COMP0_IN1+ as non-IOMUX functions.
23 PA19 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with SWDIO (2-pin serial wire debug data), SPI1_POCI, I2C1_SDA and TIMA0_C2 among its functions, and A0_13 (ADC0 channel 13) as a non-IOMUX analog function.
24 PA20 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with SWCLK (2-pin serial wire debug clock), SPI1_SCK, I2C1_SCL and TIMA0_C2N among its functions, and A0_14 (ADC0 channel 14) as a non-IOMUX analog function.
25 PA21 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART7_TX, UART1_CTS, SPI1_CS1 and TIMA0_C0 among its functions, and A1_7 (ADC1 channel 7), COMP2_IN1- and VREF- as non-IOMUX analog functions.
26 PA22 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART7_RX, SPI0_CS2, UART1_RTS, CLK_OUT and I2C0_SCL among its functions, and A0_7 (ADC0 channel 7) as a non-IOMUX analog function.
27 PA23 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART7_TX, SPI0_CS3, I2C2_SCL and TIMA0_C3 among its functions, and A1_12 (ADC1 channel 12), COMP1_IN1- and VREF+ as non-IOMUX analog functions.
28 PA24 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART7_RX, SPI0_CS2, I2C2_SDA and TIMA0_C3N among its functions, and A0_3 (ADC0 channel 3) as a non-IOMUX analog function.
29 PA25 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART3_RX, SPI1_CS3, TIMG12_C1 and UART3_TX among its functions, and A0_2 (ADC0 channel 2) as a non-IOMUX analog function.
30 PA26 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART3_TX, SPI1_CS0, TIMG8_C0, CAN0_TX and UART3_RX among its functions, and A0_1 (ADC0 channel 1) and COMP0_IN0+ as non-IOMUX analog functions.
31 PA27 bidirectional Standard (SDIO) IO with 6 mA maximum current at VDD ≥ 2.7 V, with UART3_RX, SPI1_CS1, CLK_OUT, RTC_OUT and CAN0_RX among its functions, and A0_0 (ADC0 channel 0) and COMP0_IN0- as non-IOMUX analog functions.
32 VCORE power_out Internal core-logic supply node that must only be connected to a 470 nF CVCORE capacitor to VSS, with no external voltage or load applied.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage at VDD pin VDD -0.3 4.1 V At VDD pin 54
Input voltage applied to 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 54
Input voltage applied to common tolerance pins VI -0.3 4.1 V Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) 54
Current into VDD pin (source) IVDD 80 mA -40 °C ≤ Tj ≤ 130 °C 54
Current into VDD pin (source) IVDD 100 mA -40 °C ≤ Tj ≤ 90 °C 54
Current out of VSS pin (sink) IVSS 80 mA -40 °C ≤ Tj ≤ 130 °C 54
Current out of VSS pin (sink) IVSS 100 mA -40 °C ≤ Tj ≤ 90 °C 54
Current of SDIO pin IIO 6 mA Current sunk or sourced by SDIO pin, VDD>=2.7V 54
Current of HSIO pin IIO 6 mA Current sunk or sourced by HSIO pin, VDD>=2.7V 54
Current of HDIO pin IIO 20 mA Current sunk or sourced by HDIO pin 54
Current of ODIO pin IIO 20 mA Current sunk by ODIO pin 54
Supported diode current ID -2 2 mA Diode current at any device pin (excluding Open Drain IO) 54
Ambient temperature TA -40 125 °C Ambient temperature 54
Junction temperature TJ -40 130 °C Junction temperature 54
Storage temperature Tstg -40 150 °C 54
Supply voltage VDD 1.62 3.6 V 54
Ambient temperature TA -40 125 °C 54
Max junction temperature TJ 130 °C 55
MCLK, CPUCLK frequency with 2 flash wait states fMCLK 80 MHz PD1 bus clock; wait states managed by SYSCTL 55
MCLK, CPUCLK frequency with 1 flash wait state fMCLK 48 MHz PD1 bus clock; wait states managed by SYSCTL 55
MCLK, CPUCLK frequency with 0 flash wait states fMCLK 24 MHz PD1 bus clock; wait states managed by SYSCTL 55
ULPCLK frequency fULPCLK 40 MHz PD0 bus clock 55
Voltage on VCORE pin VCORE 1.35 V 54
Capacitor connected between VDD and VSS CVDD 10 uF Low-ESR capacitor, tolerance ±20% or better required 54
Capacitor connected between VCORE and VSS CVCORE 470 nF Low-ESR capacitor, tolerance ±20% or better required 54
Junction-to-ambient thermal resistance (VQFN-32 RHB) RθJA 31.3 °C/W 56
Junction-to-case (top) thermal resistance (VQFN-32 RHB) RθJC(top) 22.6 °C/W 56
Junction-to-board thermal resistance (VQFN-32 RHB) RθJB 12.2 °C/W 56
Junction-to-top characterization parameter (VQFN-32 RHB) ΨJT 0.3 °C/W 56
Junction-to-board characterization parameter (VQFN-32 RHB) ΨJB 12.1 °C/W 56
Junction-to-case (bottom) thermal resistance (VQFN-32 RHB) RθJC(bot) 2.8 °C/W 56
SLEEP mode supply current, MCLK=SYSPLL 80MHz, CPU halted IDDSLEEP 4471 6678 uA VDD=3.3V; MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU is halted; 125 °C column 57
STOP mode supply current, STOP0 IDDSTOP0 467 516 uA VDD=3.3V; SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0; 125 °C column 57
STOP mode supply current, STOP1 IDDSTOP1 255 298 uA VDD=3.3V; SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0; 125 °C column 57
STOP mode supply current, STOP2 IDDSTOP2 86 123 uA VDD=3.3V; SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz; 125 °C column 57
STANDBY mode supply current, STANDBY0 IDDSTBY0 29 105 uA VDD=3.3V; LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled; 125 °C column 58
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V 58
Power-on reset voltage level, falling VPOR- 0.9 1.25 1.54 V 58
POR hysteresis VHYS, POR 30 58 74 mV 58
Brown-out reset voltage level 0 (default), cold start rising VBOR0+, COLD 1.5 1.56 1.63 V -40 °C ≤ Ta ≤ 25 °C; cold start, rising 59
Brown-out reset voltage level 0 (default), cold start rising VBOR0+, COLD 1.51 1.58 1.65 V 25 °C ≤ Ta ≤ 125 °C; cold start, rising 59
Brown-out reset voltage level 0, rising VBOR0+ 1.56 1.59 1.62 V Rising(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 0, falling VBOR0- 1.55 1.58 1.61 V Falling(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 1, rising VBOR1+ 2.13 2.17 2.21 V Rising(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 1, falling VBOR1- 2.1 2.14 2.18 V Falling(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 2, rising VBOR2+ 2.73 2.77 2.82 V Rising(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 2, falling VBOR2- 2.7 2.74 2.79 V Falling(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 3, rising VBOR3+ 2.88 2.96 3.04 V Rising(1); device in RUN, SLEEP or STOP mode 59
Brown-out reset voltage level 3, falling VBOR3- 2.85 2.93 3.01 V Falling(1); device in RUN, SLEEP or STOP mode 59
High level input voltage, ODIO VIH 2 5.5 V VDD≥2.7V 64
High level input voltage, ODIO VIH 5.5 V VDD≥1.62V; printed min is 0.7*VDD 64
Low level input voltage, ODIO VIL -0.3 0.8 V VDD≥2.7V 64
Low level input voltage, ODIO VIL -0.3 V VDD≥1.62V; printed max is 0.3*VDD 64
High-Z leakage current, SDIO (all packages except PZ, PN, PM) Ilkg 50 nA 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 125 °C 64
Low level output voltage, SDIO VOL 0.45 V VDD≥2.7V, /IIO/max=6mA; -40 °C ≤ Ta ≤ 125 °C 65
Low level output voltage, HSIO VOL 0.45 V VDD≥2.7V, DRV=1, /IIO/max=6mA; -40 °C ≤ Ta ≤ 125 °C 65
Low level output voltage, HDIO VOL 0.4 V VDD≥2.7V, DRV=1(5), /IIO/max=20mA 65
Low level output voltage, ODIO VOL 0.45 V VDD≥2.7V, IOL,max=8mA; -40 °C ≤ Ta ≤ 125 °C 65

CAD (KiCad official)

  • Symbol: MSPM0G1518SRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: mspm0g1518srhbr-etched.step / mspm0g1518srhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mspm0g1518srhbr.step / mspm0g1518srhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (162 pp, sha256 a6ce501f275f0727, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF