main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mspm0g1506srhbr: viewers · Ray
mspm0g1506srhbr-etched.glb Publish 0.1.0 · Ray
mspm0g1506srhbr-etched.step mspm0g1506srhbr: factory component page (tier=mfr) · Ray
mspm0g1506srhbr-hero.glb mspm0g1506srhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
mspm0g1506srhbr-hero.overlay.json Publish 0.1.0 · Ray
mspm0g1506srhbr.glb Publish 0.1.0 · Ray
mspm0g1506srhbr.kicad_mod Publish 0.1.0 · Ray
mspm0g1506srhbr.kicad_sym Publish 0.1.0 · Ray
mspm0g1506srhbr.lbr Publish 0.1.0 · Ray
mspm0g1506srhbr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MSPM0G1506SRHBR

TI(德州仪器) · IC · QFN-32(5x5)

MSPM0G1506SRHBR from TI(德州仪器), in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional 5V-tolerant open-drain GPIO with wake-up from SHUTDOWN, default BSL I2C_SDA, and it needs an external pull-up to output high.
2 PA1 bidirectional 5V-tolerant open-drain GPIO with wake-up from SHUTDOWN, default BSL I2C_SCL, and it needs an external pull-up to output high.
3 NRST input Active-low reset input that must be pulled high to VDD or the device cannot start.
4 VDD power_in Power supply input with a recommended operating range of 1.62 V to 3.6 V.
5 VSS power_in Ground supply pin for the device.
6 PA2 bidirectional Standard-drive GPIO that doubles as the ROSC pin, which needs a 100 kΩ ±0.1% resistor to VSS only when the SYSOSC frequency correction loop is used.
7 PA3 bidirectional Standard-drive GPIO that doubles as the LFXIN input of the 32 kHz low-frequency crystal oscillator (LFXT).
8 PA4 bidirectional Standard-drive GPIO that doubles as the LFXOUT output of the 32 kHz crystal oscillator (LFXT) or the LFCLK_IN digital low-frequency clock input.
9 PA5 bidirectional Standard-drive GPIO that doubles as the HFXIN input of the high-frequency crystal oscillator (HFXT) and FCC_IN.
10 PA6 bidirectional Standard-drive GPIO that doubles as the HFXOUT output of the high-frequency crystal oscillator (HFXT) or the HFCLK_IN digital high-frequency clock input.
11 PA7 bidirectional Standard-drive GPIO that can be routed to COMP0_OUT, CLK_OUT or timer functions through IOMUX.
12 PA8 bidirectional Standard-drive GPIO that can be routed to UART1_TX, SPI0_CS0, UART0_RTS or TIMA0/TIMA1 functions through IOMUX.
13 PA9 bidirectional High-speed GPIO that can be routed to UART1_RX, SPI0_PICO, RTC_OUT, CLK_OUT or timer functions through IOMUX.
14 PA10 bidirectional High-drive GPIO rated for 20 mA drive strength, default BSL UART_TX, with alternates including I2C0_SDA and CLK_OUT.
15 PA11 bidirectional High-drive GPIO rated for 20 mA drive strength, default BSL UART_RX, with alternates including I2C0_SCL and COMP0_OUT.
16 PA12 bidirectional High-speed GPIO that can be routed to UART3_CTS, SPI0_SCK, TIMG0_C0 or FCC_IN through IOMUX.
17 PA13 bidirectional High-speed GPIO that can be routed to UART3_RTS, SPI0_POCI, UART3_RX or TIMG0_C1 through IOMUX.
18 PA14 bidirectional High-speed GPIO that also serves as ADC0 analog input A0_12 and COMP0_IN2+.
19 PA15 bidirectional Standard-drive GPIO that also serves as ADC1 analog input A1_0 and DAC_OUT; when DAC_OUT is used, A1_0 cannot sample external signals.
20 PA16 bidirectional Standard-drive GPIO that also serves as ADC1 analog input A1_1 and OPA1_OUT, with alternate COMP2_OUT and SPI1_POCI functions.
21 PA17 bidirectional Standard-drive GPIO with wake-up from SHUTDOWN that also serves as ADC1 analog input A1_2, OPA1_IN1- and COMP0_IN1-.
22 PA18 bidirectional Standard-drive GPIO with wake-up from SHUTDOWN that also serves as ADC1 analog input A1_3, OPA1_IN1+, COMP0_IN1+ and GPAMP_IN-, and is default BSL_Invoke.
23 PA19 bidirectional High-speed GPIO that serves as the SWDIO serial wire debug data input/output.
24 PA20 bidirectional Standard-drive GPIO that serves as the SWCLK serial wire debug clock input.
25 PA21 bidirectional Standard-drive GPIO that also serves as ADC1 analog input A1_7, COMP2_IN1- and the VREF- ground connection; it has an internal test connection and no injection current is allowed on this pin.
26 PA22 bidirectional Standard-drive GPIO that also serves as ADC0 analog input A0_7 and GPAMP_OUT/OPA0_OUT, with alternate CLK_OUT function.
27 PA23 bidirectional Standard-drive GPIO that serves as the VREF+ voltage reference pin, usable as external reference input or internal reference output, and also as COMP1_IN1-; a decoupling capacitor is required on VREF+ when an external reference is used.
28 PA24 bidirectional Standard-drive GPIO that also serves as ADC0 analog input A0_3 and OPA0_IN1-.
29 PA25 bidirectional Standard-drive GPIO that also serves as ADC0 analog input A0_2 and OPA0_IN1+.
30 PA26 bidirectional Standard-drive GPIO that also serves as ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+.
31 PA27 bidirectional Standard-drive GPIO that also serves as ADC0 analog input A0_0, COMP0_IN0- and OPA0_IN0-, with alternate RTC_OUT function.
32 VCORE power_out Regulated core supply output that must connect only to a 470 nF tank capacitor to VSS, with no other voltage or external load applied.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer TI(德州仪器)
Package QFN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 4.1 V At VDD pin 30
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 30
Input voltage, common tolerance pins VI -0.3 4.1 V Applied to any common tolerance pins; printed VDD + 0.3 (4.1 MAX) 30
Current into VDD pin (source) IVDD 80 mA -40℃ ≤ Tj ≤ 130℃ 30
Current into VDD pin (source) IVDD 100 mA -40℃ ≤ Tj ≤ 90℃ 30
Current out of VSS pin (sink) IVSS 80 mA -40℃ ≤ Tj ≤ 130℃ 30
Current out of VSS pin (sink) IVSS 100 mA -40℃ ≤ Tj ≤ 90℃ 30
Current of SDIO pin IIO 6 mA Current sunk or sourced by SDIO pin 30
Current of HSIO pin IIO 6 mA Current sunk or sourced by HSIO pin 30
Current of HDIO pin IIO 20 mA Current sunk or sourced by HDIO pin 30
Current of ODIO pin IIO 20 mA Current sunk by ODIO pin 30
Supported diode current ID -2 2 mA Diode current at any device pin 30
Ambient temperature TA -40 125 °C Ambient temperature 30
Junction temperature TJ -40 130 °C Junction temperature 30
Storage temperature Tstg -40 150 °C Storage temperature 30
Supply voltage VDD 1.62 3.6 V 30
MCLK, CPUCLK frequency with 2 flash wait states fMCLK 80 MHz 2 flash wait states 31
MCLK, CPUCLK frequency with 1 flash wait state fMCLK 48 MHz 1 flash wait state 31
MCLK, CPUCLK frequency with 0 flash wait states fMCLK 24 MHz 0 flash wait states 31
ULPCLK frequency (PD0 bus clock) fULPCLK 40 MHz 31
Ambient temperature, S version TA -40 125 °C S version 30
Max junction temperature, S version TJ 130 °C S version 30
Junction-to-ambient thermal resistance, VQFN-32 (RHB) RθJA 32.1 °C/W VQFN-32 (RHB) 32
Junction-to-case (top) thermal resistance, VQFN-32 (RHB) RθJC(top) 23.6 °C/W VQFN-32 (RHB) 32
Junction-to-board thermal resistance, VQFN-32 (RHB) RθJB 13 °C/W VQFN-32 (RHB) 32
Junction-to-case (bottom) thermal resistance, VQFN-32 (RHB) RθJC(bot) 3.3 °C/W VQFN-32 (RHB) 32
RUN/SLEEP supply current, SLEEP mode, 80 MHz SYSPLL, CPU halted IDDSLEEP 3189 3400 uA MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU halted, 80MHz, VDD=3.3V, 25℃ 33
RUN/SLEEP supply current, SLEEP mode, 80 MHz SYSPLL, CPU halted IDDSLEEP 3800 5509 uA MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU halted, 80MHz, VDD=3.3V, 125℃ 33
STOP mode supply current, SYSOSC=32MHz IDDSTOP0 360 450 uA SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, VDD=3.3V, 25℃ 33
STOP mode supply current, SYSOSC=32MHz IDDSTOP0 381 577 uA SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, ULPCLK 4MHz, VDD=3.3V, 125℃ 33
STOP mode supply current, SYSOSC off, ULPCLK=LFCLK IDDSTOP2 47 67 uA SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, VDD=3.3V, 25℃ 33
STOP mode supply current, SYSOSC off, ULPCLK=LFCLK IDDSTOP2 71 170 uA SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz, VDD=3.3V, 125℃ 33
STANDBY supply current, LFXT, RTC enabled IDDSTBY0 2 7 uA LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, ULPCLK 32kHz, VDD=3.3V, 25℃ 34
STANDBY supply current, LFXT, RTC enabled IDDSTBY0 20 105 uA LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, ULPCLK 32kHz, VDD=3.3V, 125℃ 34
High-level input voltage, ODIO VIH 2 5.5 V ODIO, VDD≥2.7V 40
High-level input voltage, ODIO VIH 5.5 V ODIO, VDD≥1.62V; printed min 0.7*VDD (expression, not computed) 40
Low-level input voltage, ODIO VIL -0.3 0.8 V ODIO, VDD≥2.7V 40
Low-level input voltage, ODIO VIL -0.3 V ODIO, VDD≥1.62V; printed max 0.3*VDD (expression, not computed) 40
High-Z leakage current, SDIO (all packages except PM) Ilkg 50 nA 1.62V ≤ VDD ≤ 3.6V, -40℃ ≤ Ta ≤ 125℃ 40
SPI controller duty cycle, SCK DCSCK 40 50 60 % Controller 53
SYSOSC frequency accuracy, FCL enabled fSYSOSC -0.6 0.68 % SETUSEFCL=1, Ta = 25℃ 37
SYSOSC frequency accuracy, FCL enabled fSYSOSC -0.8 1.3 % SETUSEFCL=1, -40℃ ≤ Ta ≤ 125℃ 37
SYSOSC accuracy, FCL with ±0.1% ±25ppm ROSC fSYSOSC -0.7 0.78 % SETUSEFCL=1, Ta = 25℃, ±0.1% ±25ppm ROSC 37
SYSOSC accuracy, FCL with ±0.1% ±25ppm ROSC fSYSOSC -1.1 1.7 % SETUSEFCL=1, -40℃ ≤ Ta ≤ 125℃, ±0.1% ±25ppm ROSC 37
SYSOSC accuracy, FCL with internal ROSC, 32MHz fSYSOSC -2.1 1.6 % SETUSEFCL=1, -40℃ ≤ Ta ≤ 125℃, internal ROSC, 32MHz 37
SYSOSC accuracy, FCL disabled, 32MHz fSYSOSC -2.6 1.8 % SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40℃ ≤ Ta ≤ 125℃ 38
LFOSC accuracy fLFOSC -5 5 % -40℃ ≤ Ta ≤ 125℃ 38
LFOSC accuracy fLFOSC -3 3 % -40℃ ≤ Ta ≤ 85℃ 38
SYSPLL reference frequency range fSYSPLLREF 4 48 MHz 38
VCO output frequency fVCO 80 400 MHz 38
SYSPLL output duty cycle DCPLL 45 55 % fSYSPLLREF=32MHz, fVCO=160MHz 38
LFXT duty cycle DCLFXT 30 70 % 39
LFCLK_IN frequency fLFIN 29491 32768 36045 Hz SETUSEEXLF=1 39
HFXT frequency fHFXT 4 8 MHz HFXTRSEL=00 39
HFXT frequency fHFXT 32.01 48 MHz HFXTRSEL=11 39
Factory trim temperature TSTRIM 27 30 33 ℃ ADC and VREF configuration: RES=0 (12-bit mode), VRSEL=0h (VDD = 3.3V), ADC tsample = 12.5uS 46
Temperature coefficient TSc -2.1 -1.8 -1.7 mV/℃ -40℃ ≤ Tj ≤ 130℃ 46
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 46
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 46
8-bit DAC integral nonlinearity / 12-bit DAC INL INL -4 4 LSB 12-bit DAC, Vref = internal or external or VDD reference 48
Differential nonlinearity, 12-bit DAC DNL -1 1 LSB Vref = internal or external or VDD reference 48
Input offset voltage, comparator Voffset -20 20 mV Comparator input offset voltage 47

CAD (KiCad official)

  • Symbol: MSPM0G1506SRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: mspm0g1506srhbr-etched.step / mspm0g1506srhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mspm0g1506srhbr.step / mspm0g1506srhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TI(德州仪器) datasheet (135 pp, sha256 0e4369b6aeb4218c, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF