main
Ray
Publish 0.1.0
82a88db
MSP430I2021TRHBR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-32-EP(5x5)
MSP430I2021TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0.0+ | input | SD24 positive analog input A0.0; short unused analog input pairs and connect them to analog ground. |
| 2 | A0.0- | input | SD24 negative analog input A0.0; short unused analog input pairs and connect them to analog ground. |
| 3 | A1.0+ | input | SD24 positive analog input A1.0; short unused analog input pairs and connect them to analog ground. |
| 4 | A1.0- | input | SD24 negative analog input A1.0; short unused analog input pairs and connect them to analog ground. |
| 5 | NC | unconnected | Not connected on MSP430i2021 devices (A2.0+ on other family members); TI recommends connecting NC pins to AVSS. |
| 6 | NC | unconnected | Not connected on MSP430i2021 devices (A2.0- on other family members); TI recommends connecting NC pins to AVSS. |
| 7 | NC | unconnected | Not connected on MSP430i2021 devices (A3.0+ on other family members); TI recommends connecting NC pins to AVSS. |
| 8 | NC | unconnected | Not connected on MSP430i2021 devices (A3.0- on other family members); TI recommends connecting NC pins to AVSS. |
| 9 | VREF | power_in | SD24 external reference voltage input; when SD24REFS = 1 it must not be loaded externally and only the recommended 100 nF CVREF is connected to AVSS. |
| 10 | AVSS | power_in | Analog supply voltage, negative terminal. |
| 11 | ROSC | passive | External resistor pin for the DCO; connect the recommended 20 kΩ, 0.1% resistor between ROSC and AVSS in external resistor mode, or connect to AVSS in internal resistor mode, and do not apply external DC loading. |
| 12 | DVSS | power_in | Digital supply voltage, negative terminal. |
| 13 | VCC | power_in | Analog and digital supply voltage, positive terminal; 2.2 V to 3.6 V during program execution and flash programming or erase (absolute maximum -0.3 V to 4.1 V). |
| 14 | VCORE | power_out | Regulated 1.8-V core supply for internal use only; no external current loading or voltage is allowed, and only the recommended 470 nF CVCORE is connected. |
| 15 | RST/NMI/SBWTDIO | bidirectional | Reset or nonmaskable interrupt input and Spy-Bi-Wire test data input/output; a 47-kΩ pullup with 10 nF (or 2.2 nF with Spy-Bi-Wire) pulldown is recommended when unused. |
| 16 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on P1.0 to P1.3 and serves as the Spy-Bi-Wire test clock input; it has an internal pulldown that is always enabled, so leave open when unused. |
| 17 | P1.0/UCA0STE/MCLK/TCK | bidirectional | General-purpose digital I/O with eUSCI_A0 SPI slave transmit enable, MCLK output, and JTAG TCK input; leave open when used as JTAG and set to port output if unused. |
| 18 | P1.1/UCA0CLK/SMCLK/TMS | bidirectional | General-purpose digital I/O with eUSCI_A0 clock input/output, SMCLK output, and JTAG TMS input; leave open when used as JTAG and set to port output if unused. |
| 19 | P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK | bidirectional | General-purpose digital I/O with eUSCI_A0 UART receive or SPI slave out/master in, ACLK output, and JTAG TDI/TCLK input; leave open when used as JTAG and set to port output if unused. |
| 20 | P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI | bidirectional | General-purpose digital I/O with eUSCI_A0 UART transmit or SPI slave in/master out, Timer TA0 clock input, and JTAG TDO output; leave open when used as JTAG and set to port output if unused. |
| 21 | P1.4/UCB0STE/TA0.0 | bidirectional | General-purpose digital I/O with eUSCI_B0 SPI slave transmit enable and Timer TA0 CCR0 capture/compare output. |
| 22 | P1.5/UCB0CLK/TA0.1 | bidirectional | General-purpose digital I/O with eUSCI_B0 clock input/output and Timer TA0 CCR1 capture/compare output. |
| 23 | P1.6/UCB0SCL/UCB0SOMI/TA0.2 | bidirectional | General-purpose digital I/O with eUSCI_B0 I2C clock or SPI slave out/master in and Timer TA0 CCR2 capture/compare output. |
| 24 | P1.7/UCB0SDA/UCB0SIMO/TA1CLK | bidirectional | General-purpose digital I/O with eUSCI_B0 I2C data or SPI slave in/master out and Timer TA1 external clock input. |
| 25 | P2.0/TA1.0/CLKIN | bidirectional | General-purpose digital I/O with Timer TA1 CCR0 capture/compare output and DCO bypass clock input. |
| 26 | P2.1/TA1.1 | bidirectional | General-purpose digital I/O with Timer TA1 CCR1 capture/compare output; also an LPM4.5 wake-up source. |
| 27 | P2.2/TA1.2 | bidirectional | General-purpose digital I/O with Timer TA1 CCR2 capture/compare output; also an LPM4.5 wake-up source. |
| 28 | P2.3/VMONIN | bidirectional | General-purpose digital I/O that doubles as the voltage monitor input VMONIN when VMONLVLx is set to 111b. |
| 29 | P2.4/TA1.0 | bidirectional | General-purpose digital I/O with Timer TA1 CCR0 capture input B and compare output; available only on the 32-pin RHB package. |
| 30 | P2.5/TA0.0 | bidirectional | General-purpose digital I/O with Timer TA0 CCR0 capture input B and compare output; available only on the 32-pin RHB package. |
| 31 | P2.6/TA0.1 | bidirectional | General-purpose digital I/O with Timer TA0 CCR1 compare output; available only on the 32-pin RHB package. |
| 32 | P2.7/TA0.2 | bidirectional | General-purpose digital I/O with Timer TA0 CCR2 compare output; available only on the 32-pin RHB package. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at VCC | VCC | -0.3 | 4.1 | V | 13 | ||
| Voltage applied to pins | -0.3 | V | All pins except VCORE, ROSC and SD24 input pins; max printed as VCC + 0.3 V | 13 | |||
| Diode current at pins | -2 | 2 | mA | All pins except SD24 input pins | 13 | ||
| Diode current at SD24 input pins | 2 | mA | A0.0+, A0.0-, A1.0+, A1.0-, A2.0+, A2.0-, A3.0+, A3.0- | 13 | |||
| Maximum junction temperature | TJ,MAX | 115 | °C | 13 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 13 | ||
| Supply voltage during program execution and flash programming or erase | VCC | 2.2 | 3.6 | V | VCC = VCC | 13 | |
| Operating free-air temperature | TA | -40 | 105 | °C | T temperature range | 13 | |
| Operating junction temperature | TJ | -40 | 105 | °C | T temperature range | 13 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 16.384 | MHz | 13 | ||
| Frequency in DCO bypass mode | fDCOBYP | 0 | 16.384 | MHz | 17 | ||
| DCO absolute tolerance, external resistor mode, calibrated | -0.25 | 0.25 | % | VCC = 3 V, TA = 25°C; recommended ROSC resistor 20 kΩ, 0.1%, ±50 ppm/°C | 16 | ||
| DCO frequency temperature drift, external resistor mode | dfDCO/dT | -20 | 20 | ppm/°C | 16 | ||
| DCO frequency supply voltage drift, external resistor mode | dfDCO/dVCC | 200 | 600 | ppm/V | 16 | ||
| DCO absolute tolerance, internal resistor mode, calibrated | -0.9 | 0.9 | % | VCC = 3 V, TA = 25°C | 16 | ||
| DCO frequency temperature drift, internal resistor mode | dfDCO/dT | -200 | 200 | ppm/°C | 16 | ||
| DCO frequency supply voltage drift, internal resistor mode | dfDCO/dVCC | 200 | 600 | ppm/V | 16 | ||
| Wake-up time from LPM3 to active mode | tWAKE-UP-LPM3 | 1 | µs | MCLK = SMCLK = 1.024 MHz | 17 | ||
| Wake-up time from LPM4 to active mode | tWAKE-UP-LPM4 | 45 | µs | MCLK = SMCLK = 1.024 MHz | 17 | ||
| Wake-up time from LPM4.5 to active mode upon I/O event | tWAKE-UP-LPM4.5-IO | 0.45 | ms | CVCORE = 470 nF; time to reset vector execution | 17 | ||
| Wake-up time from LPM4.5 to active mode upon external reset | tWAKE-UP-LPM4.5-RESET | 0.45 | ms | CVCORE = 470 nF; external reset (RST); time to reset vector execution | 17 | ||
| Pulse duration required at the RST/NMI pin to accept a reset | tRESET | 4 | µs | 16 | |||
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.1 | V | VCC = 3 V | 18 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3 V | 18 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | 1.1 | V | VCC = 3 V | 18 | |
| External interrupt trigger pulse duration to set interrupt flag | t(int) | 20 | ns | VCC = 3 V; Port P1, P2: P1.x to P2.x | 18 | ||
| High-impedance leakage current | Ilkg(Py.x) | -50 | 50 | nA | VCC = 3 V | 18 | |
| Supply voltage range (voltage reference) | VCC | 2.2 | 3.6 | V | 21 | ||
| Bandgap output voltage calibrated | VBG | 1.146 | 1.158 | 1.17 | V | VCC = 3 V | 21 |
| Bandgap reference temperature coefficient | dVBG/dT | 10 | 50 | ppm/°C | VCC = 3 V | 21 | |
| Temperature sensor output voltage | Vsensor | 610 | 650 | 690 | mV | VCC = 3 V, TA = 30°C | 21 |
| Temperature sensor output voltage | Vsensor | 765 | 805 | 845 | mV | VCC = 3 V, TA = 105°C | 21 |
| Temperature coefficient of sensor | TCsensor | 1.96 | 2.07 | 2.17 | mV/°C | 21 | |
| SD24 supply voltage range | VCC | 2.2 | 3.6 | V | AVSS = DVSS = 0 V | 22 | |
| SD24 internal reference voltage | VSD24REF | 1.146 | 1.158 | 1.17 | V | SD24REFS = 1; VCC = 3 V | 22 |
| External reference input voltage range | VREF(I) | 1 | 1.2 | 1.5 | V | SD24REFS = 0; VCC = 3 V | 22 |
| Differential input voltage range for specified performance | VID | -928 | 928 | mV | SD24REFS = 1; SD24GAINx = 1 | 22 | |
| Differential input voltage range for specified performance | VID | -58 | 58 | mV | SD24REFS = 1; SD24GAINx = 16 | 22 | |
| Integral nonlinearity, end-point fit | INL | -0.003 | 0.003 | % FSR | SD24REFS = 1; SD24GAINx: 1, 8, 16; VCC = 3 V | 23 | |
| Gain error | EG | -2 | 2 | % | SD24REFS = 1; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V | 23 | |
| Integral nonlinearity, end-point fit | INL | -0.003 | 0.003 | % FSR | SD24REFS = 0; SD24GAINx: 1, 8, 16; VCC = 3 V; external reference 1.2 V | 24 | |
| Gain error | EG | -1 | 1 | % | SD24REFS = 0; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V; external reference 1.2 V | 24 | |
| UART receive deglitch time | tt | 8 | 15 | 20 | ns | UCGLITx = 0; VCC = 2.2 V, 3 V | 26 |
| UART receive deglitch time | tt | 30 | 50 | 60 | ns | UCGLITx = 1; VCC = 2.2 V, 3 V | 26 |
| STE lead time, STE active to clock | tSTE,LEAD | 150 | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V | 26 | ||
| STE lag time, last clock to STE inactive | tSTE,LAG | 200 | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V | 26 | ||
| STE access time, STE active to SIMO data out | tSTE,ACC | 40 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V | 26 | ||
| STE access time, STE active to SIMO data out | tSTE,ACC | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V | 26 | ||
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | 40 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V | 26 | ||
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V | 26 | ||
| SOMI input data setup time | tSU,MI | 50 | ns | VCC = 2.2 V | 26 | ||
| SOMI input data setup time | tSU,MI | 30 | ns | VCC = 3 V | 26 | ||
| SIMO output data valid time | tVALID,MO | 7 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC = 2.2 V | 26 | ||
| SIMO output data valid time | tVALID,MO | 5 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC = 3 V | 26 | ||
| Junction-to-ambient thermal resistance, still air | RθJA | 35.9 | °C/W | QFN-32 (RHB) package, JEDEC 2S2P, still air | 15 | ||
| Junction-to-case (top) thermal resistance | RθJC(TOP) | 25.5 | °C/W | QFN-32 (RHB) package | 15 | ||
| Junction-to-board thermal resistance | RθJB | 8.6 | °C/W | QFN-32 (RHB) package | 15 | ||
| Junction-to-board thermal characterization parameter | ΨJB | 8.6 | °C/W | QFN-32 (RHB) package | 15 | ||
| Junction-to-top thermal characterization parameter | ΨJT | 0.3 | °C/W | QFN-32 (RHB) package | 15 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(BOTTOM) | 1.4 | °C/W | QFN-32 (RHB) package | 15 |
CAD (KiCad official)
- Symbol:
MSP430I2021TRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
msp430i2021trhbr-etched.step/msp430i2021trhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430i2021trhbr.step/msp430i2021trhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (81 pp, sha256
546ca9145d8b8883, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430I2021TRHBR
**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-32-EP(5x5)
MSP430I2021TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0.0+ | input | SD24 positive analog input A0.0; short unused analog input pairs and connect them to analog ground. |
| 2 | A0.0- | input | SD24 negative analog input A0.0; short unused analog input pairs and connect them to analog ground. |
| 3 | A1.0+ | input | SD24 positive analog input A1.0; short unused analog input pairs and connect them to analog ground. |
| 4 | A1.0- | input | SD24 negative analog input A1.0; short unused analog input pairs and connect them to analog ground. |
| 5 | NC | unconnected | Not connected on MSP430i2021 devices (A2.0+ on other family members); TI recommends connecting NC pins to AVSS. |
| 6 | NC | unconnected | Not connected on MSP430i2021 devices (A2.0- on other family members); TI recommends connecting NC pins to AVSS. |
| 7 | NC | unconnected | Not connected on MSP430i2021 devices (A3.0+ on other family members); TI recommends connecting NC pins to AVSS. |
| 8 | NC | unconnected | Not connected on MSP430i2021 devices (A3.0- on other family members); TI recommends connecting NC pins to AVSS. |
| 9 | VREF | power_in | SD24 external reference voltage input; when SD24REFS = 1 it must not be loaded externally and only the recommended 100 nF CVREF is connected to AVSS. |
| 10 | AVSS | power_in | Analog supply voltage, negative terminal. |
| 11 | ROSC | passive | External resistor pin for the DCO; connect the recommended 20 kΩ, 0.1% resistor between ROSC and AVSS in external resistor mode, or connect to AVSS in internal resistor mode, and do not apply external DC loading. |
| 12 | DVSS | power_in | Digital supply voltage, negative terminal. |
| 13 | VCC | power_in | Analog and digital supply voltage, positive terminal; 2.2 V to 3.6 V during program execution and flash programming or erase (absolute maximum -0.3 V to 4.1 V). |
| 14 | VCORE | power_out | Regulated 1.8-V core supply for internal use only; no external current loading or voltage is allowed, and only the recommended 470 nF CVCORE is connected. |
| 15 | RST/NMI/SBWTDIO | bidirectional | Reset or nonmaskable interrupt input and Spy-Bi-Wire test data input/output; a 47-kΩ pullup with 10 nF (or 2.2 nF with Spy-Bi-Wire) pulldown is recommended when unused. |
| 16 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on P1.0 to P1.3 and serves as the Spy-Bi-Wire test clock input; it has an internal pulldown that is always enabled, so leave open when unused. |
| 17 | P1.0/UCA0STE/MCLK/TCK | bidirectional | General-purpose digital I/O with eUSCI_A0 SPI slave transmit enable, MCLK output, and JTAG TCK input; leave open when used as JTAG and set to port output if unused. |
| 18 | P1.1/UCA0CLK/SMCLK/TMS | bidirectional | General-purpose digital I/O with eUSCI_A0 clock input/output, SMCLK output, and JTAG TMS input; leave open when used as JTAG and set to port output if unused. |
| 19 | P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK | bidirectional | General-purpose digital I/O with eUSCI_A0 UART receive or SPI slave out/master in, ACLK output, and JTAG TDI/TCLK input; leave open when used as JTAG and set to port output if unused. |
| 20 | P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI | bidirectional | General-purpose digital I/O with eUSCI_A0 UART transmit or SPI slave in/master out, Timer TA0 clock input, and JTAG TDO output; leave open when used as JTAG and set to port output if unused. |
| 21 | P1.4/UCB0STE/TA0.0 | bidirectional | General-purpose digital I/O with eUSCI_B0 SPI slave transmit enable and Timer TA0 CCR0 capture/compare output. |
| 22 | P1.5/UCB0CLK/TA0.1 | bidirectional | General-purpose digital I/O with eUSCI_B0 clock input/output and Timer TA0 CCR1 capture/compare output. |
| 23 | P1.6/UCB0SCL/UCB0SOMI/TA0.2 | bidirectional | General-purpose digital I/O with eUSCI_B0 I2C clock or SPI slave out/master in and Timer TA0 CCR2 capture/compare output. |
| 24 | P1.7/UCB0SDA/UCB0SIMO/TA1CLK | bidirectional | General-purpose digital I/O with eUSCI_B0 I2C data or SPI slave in/master out and Timer TA1 external clock input. |
| 25 | P2.0/TA1.0/CLKIN | bidirectional | General-purpose digital I/O with Timer TA1 CCR0 capture/compare output and DCO bypass clock input. |
| 26 | P2.1/TA1.1 | bidirectional | General-purpose digital I/O with Timer TA1 CCR1 capture/compare output; also an LPM4.5 wake-up source. |
| 27 | P2.2/TA1.2 | bidirectional | General-purpose digital I/O with Timer TA1 CCR2 capture/compare output; also an LPM4.5 wake-up source. |
| 28 | P2.3/VMONIN | bidirectional | General-purpose digital I/O that doubles as the voltage monitor input VMONIN when VMONLVLx is set to 111b. |
| 29 | P2.4/TA1.0 | bidirectional | General-purpose digital I/O with Timer TA1 CCR0 capture input B and compare output; available only on the 32-pin RHB package. |
| 30 | P2.5/TA0.0 | bidirectional | General-purpose digital I/O with Timer TA0 CCR0 capture input B and compare output; available only on the 32-pin RHB package. |
| 31 | P2.6/TA0.1 | bidirectional | General-purpose digital I/O with Timer TA0 CCR1 compare output; available only on the 32-pin RHB package. |
| 32 | P2.7/TA0.2 | bidirectional | General-purpose digital I/O with Timer TA0 CCR2 compare output; available only on the 32-pin RHB package. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at VCC | VCC | -0.3 | | 4.1 | V | | 13 |
| Voltage applied to pins | | -0.3 | | | V | All pins except VCORE, ROSC and SD24 input pins; max printed as VCC + 0.3 V | 13 |
| Diode current at pins | | -2 | | 2 | mA | All pins except SD24 input pins | 13 |
| Diode current at SD24 input pins | | | | 2 | mA | A0.0+, A0.0-, A1.0+, A1.0-, A2.0+, A2.0-, A3.0+, A3.0- | 13 |
| Maximum junction temperature | TJ,MAX | | | 115 | °C | | 13 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 13 |
| Supply voltage during program execution and flash programming or erase | VCC | 2.2 | | 3.6 | V | VCC = VCC | 13 |
| Operating free-air temperature | TA | -40 | | 105 | °C | T temperature range | 13 |
| Operating junction temperature | TJ | -40 | | 105 | °C | T temperature range | 13 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 16.384 | MHz | | 13 |
| Frequency in DCO bypass mode | fDCOBYP | 0 | | 16.384 | MHz | | 17 |
| DCO absolute tolerance, external resistor mode, calibrated | | -0.25 | | 0.25 | % | VCC = 3 V, TA = 25°C; recommended ROSC resistor 20 kΩ, 0.1%, ±50 ppm/°C | 16 |
| DCO frequency temperature drift, external resistor mode | dfDCO/dT | -20 | | 20 | ppm/°C | | 16 |
| DCO frequency supply voltage drift, external resistor mode | dfDCO/dVCC | | 200 | 600 | ppm/V | | 16 |
| DCO absolute tolerance, internal resistor mode, calibrated | | -0.9 | | 0.9 | % | VCC = 3 V, TA = 25°C | 16 |
| DCO frequency temperature drift, internal resistor mode | dfDCO/dT | -200 | | 200 | ppm/°C | | 16 |
| DCO frequency supply voltage drift, internal resistor mode | dfDCO/dVCC | | 200 | 600 | ppm/V | | 16 |
| Wake-up time from LPM3 to active mode | tWAKE-UP-LPM3 | | | 1 | µs | MCLK = SMCLK = 1.024 MHz | 17 |
| Wake-up time from LPM4 to active mode | tWAKE-UP-LPM4 | | | 45 | µs | MCLK = SMCLK = 1.024 MHz | 17 |
| Wake-up time from LPM4.5 to active mode upon I/O event | tWAKE-UP-LPM4.5-IO | | | 0.45 | ms | CVCORE = 470 nF; time to reset vector execution | 17 |
| Wake-up time from LPM4.5 to active mode upon external reset | tWAKE-UP-LPM4.5-RESET | | | 0.45 | ms | CVCORE = 470 nF; external reset (RST); time to reset vector execution | 17 |
| Pulse duration required at the RST/NMI pin to accept a reset | tRESET | 4 | | | µs | | 16 |
| Positive-going input threshold voltage | VIT+ | 1.5 | | 2.1 | V | VCC = 3 V | 18 |
| Negative-going input threshold voltage | VIT- | 0.75 | | 1.65 | V | VCC = 3 V | 18 |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | | 1.1 | V | VCC = 3 V | 18 |
| External interrupt trigger pulse duration to set interrupt flag | t(int) | 20 | | | ns | VCC = 3 V; Port P1, P2: P1.x to P2.x | 18 |
| High-impedance leakage current | Ilkg(Py.x) | -50 | | 50 | nA | VCC = 3 V | 18 |
| Supply voltage range (voltage reference) | VCC | 2.2 | | 3.6 | V | | 21 |
| Bandgap output voltage calibrated | VBG | 1.146 | 1.158 | 1.17 | V | VCC = 3 V | 21 |
| Bandgap reference temperature coefficient | dVBG/dT | | 10 | 50 | ppm/°C | VCC = 3 V | 21 |
| Temperature sensor output voltage | Vsensor | 610 | 650 | 690 | mV | VCC = 3 V, TA = 30°C | 21 |
| Temperature sensor output voltage | Vsensor | 765 | 805 | 845 | mV | VCC = 3 V, TA = 105°C | 21 |
| Temperature coefficient of sensor | TCsensor | 1.96 | 2.07 | 2.17 | mV/°C | | 21 |
| SD24 supply voltage range | VCC | 2.2 | | 3.6 | V | AVSS = DVSS = 0 V | 22 |
| SD24 internal reference voltage | VSD24REF | 1.146 | 1.158 | 1.17 | V | SD24REFS = 1; VCC = 3 V | 22 |
| External reference input voltage range | VREF(I) | 1 | 1.2 | 1.5 | V | SD24REFS = 0; VCC = 3 V | 22 |
| Differential input voltage range for specified performance | VID | -928 | | 928 | mV | SD24REFS = 1; SD24GAINx = 1 | 22 |
| Differential input voltage range for specified performance | VID | -58 | | 58 | mV | SD24REFS = 1; SD24GAINx = 16 | 22 |
| Integral nonlinearity, end-point fit | INL | -0.003 | | 0.003 | % FSR | SD24REFS = 1; SD24GAINx: 1, 8, 16; VCC = 3 V | 23 |
| Gain error | EG | -2 | | 2 | % | SD24REFS = 1; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V | 23 |
| Integral nonlinearity, end-point fit | INL | -0.003 | | 0.003 | % FSR | SD24REFS = 0; SD24GAINx: 1, 8, 16; VCC = 3 V; external reference 1.2 V | 24 |
| Gain error | EG | -1 | | 1 | % | SD24REFS = 0; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V; external reference 1.2 V | 24 |
| UART receive deglitch time | tt | 8 | 15 | 20 | ns | UCGLITx = 0; VCC = 2.2 V, 3 V | 26 |
| UART receive deglitch time | tt | 30 | 50 | 60 | ns | UCGLITx = 1; VCC = 2.2 V, 3 V | 26 |
| STE lead time, STE active to clock | tSTE,LEAD | 150 | | | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V | 26 |
| STE lag time, last clock to STE inactive | tSTE,LAG | 200 | | | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V | 26 |
| STE access time, STE active to SIMO data out | tSTE,ACC | | | 40 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V | 26 |
| STE access time, STE active to SIMO data out | tSTE,ACC | | | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V | 26 |
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | | | 40 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V | 26 |
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | | | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V | 26 |
| SOMI input data setup time | tSU,MI | 50 | | | ns | VCC = 2.2 V | 26 |
| SOMI input data setup time | tSU,MI | 30 | | | ns | VCC = 3 V | 26 |
| SIMO output data valid time | tVALID,MO | | | 7 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC = 2.2 V | 26 |
| SIMO output data valid time | tVALID,MO | | | 5 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC = 3 V | 26 |
| Junction-to-ambient thermal resistance, still air | RθJA | | 35.9 | | °C/W | QFN-32 (RHB) package, JEDEC 2S2P, still air | 15 |
| Junction-to-case (top) thermal resistance | RθJC(TOP) | | 25.5 | | °C/W | QFN-32 (RHB) package | 15 |
| Junction-to-board thermal resistance | RθJB | | 8.6 | | °C/W | QFN-32 (RHB) package | 15 |
| Junction-to-board thermal characterization parameter | ΨJB | | 8.6 | | °C/W | QFN-32 (RHB) package | 15 |
| Junction-to-top thermal characterization parameter | ΨJT | | 0.3 | | °C/W | QFN-32 (RHB) package | 15 |
| Junction-to-case (bottom) thermal resistance | RθJC(BOTTOM) | | 1.4 | | °C/W | QFN-32 (RHB) package | 15 |
## CAD (KiCad official)
- Symbol: `MSP430I2021TRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `msp430i2021trhbr-etched.step` / `msp430i2021trhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430i2021trhbr.step` / `msp430i2021trhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430i2021.pdf) (81 pp, sha256 `546ca9145d8b8883`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430i2021trhbr-datasheet.pdf)