Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430I2021TRHBR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-32-EP(5x5)

MSP430I2021TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0.0+ input SD24 positive analog input A0.0; short unused analog input pairs and connect them to analog ground.
2 A0.0- input SD24 negative analog input A0.0; short unused analog input pairs and connect them to analog ground.
3 A1.0+ input SD24 positive analog input A1.0; short unused analog input pairs and connect them to analog ground.
4 A1.0- input SD24 negative analog input A1.0; short unused analog input pairs and connect them to analog ground.
5 NC unconnected Not connected on MSP430i2021 devices (A2.0+ on other family members); TI recommends connecting NC pins to AVSS.
6 NC unconnected Not connected on MSP430i2021 devices (A2.0- on other family members); TI recommends connecting NC pins to AVSS.
7 NC unconnected Not connected on MSP430i2021 devices (A3.0+ on other family members); TI recommends connecting NC pins to AVSS.
8 NC unconnected Not connected on MSP430i2021 devices (A3.0- on other family members); TI recommends connecting NC pins to AVSS.
9 VREF power_in SD24 external reference voltage input; when SD24REFS = 1 it must not be loaded externally and only the recommended 100 nF CVREF is connected to AVSS.
10 AVSS power_in Analog supply voltage, negative terminal.
11 ROSC passive External resistor pin for the DCO; connect the recommended 20 kΩ, 0.1% resistor between ROSC and AVSS in external resistor mode, or connect to AVSS in internal resistor mode, and do not apply external DC loading.
12 DVSS power_in Digital supply voltage, negative terminal.
13 VCC power_in Analog and digital supply voltage, positive terminal; 2.2 V to 3.6 V during program execution and flash programming or erase (absolute maximum -0.3 V to 4.1 V).
14 VCORE power_out Regulated 1.8-V core supply for internal use only; no external current loading or voltage is allowed, and only the recommended 470 nF CVCORE is connected.
15 RST/NMI/SBWTDIO bidirectional Reset or nonmaskable interrupt input and Spy-Bi-Wire test data input/output; a 47-kΩ pullup with 10 nF (or 2.2 nF with Spy-Bi-Wire) pulldown is recommended when unused.
16 TEST/SBWTCK input Selects test mode for the JTAG pins on P1.0 to P1.3 and serves as the Spy-Bi-Wire test clock input; it has an internal pulldown that is always enabled, so leave open when unused.
17 P1.0/UCA0STE/MCLK/TCK bidirectional General-purpose digital I/O with eUSCI_A0 SPI slave transmit enable, MCLK output, and JTAG TCK input; leave open when used as JTAG and set to port output if unused.
18 P1.1/UCA0CLK/SMCLK/TMS bidirectional General-purpose digital I/O with eUSCI_A0 clock input/output, SMCLK output, and JTAG TMS input; leave open when used as JTAG and set to port output if unused.
19 P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK bidirectional General-purpose digital I/O with eUSCI_A0 UART receive or SPI slave out/master in, ACLK output, and JTAG TDI/TCLK input; leave open when used as JTAG and set to port output if unused.
20 P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI bidirectional General-purpose digital I/O with eUSCI_A0 UART transmit or SPI slave in/master out, Timer TA0 clock input, and JTAG TDO output; leave open when used as JTAG and set to port output if unused.
21 P1.4/UCB0STE/TA0.0 bidirectional General-purpose digital I/O with eUSCI_B0 SPI slave transmit enable and Timer TA0 CCR0 capture/compare output.
22 P1.5/UCB0CLK/TA0.1 bidirectional General-purpose digital I/O with eUSCI_B0 clock input/output and Timer TA0 CCR1 capture/compare output.
23 P1.6/UCB0SCL/UCB0SOMI/TA0.2 bidirectional General-purpose digital I/O with eUSCI_B0 I2C clock or SPI slave out/master in and Timer TA0 CCR2 capture/compare output.
24 P1.7/UCB0SDA/UCB0SIMO/TA1CLK bidirectional General-purpose digital I/O with eUSCI_B0 I2C data or SPI slave in/master out and Timer TA1 external clock input.
25 P2.0/TA1.0/CLKIN bidirectional General-purpose digital I/O with Timer TA1 CCR0 capture/compare output and DCO bypass clock input.
26 P2.1/TA1.1 bidirectional General-purpose digital I/O with Timer TA1 CCR1 capture/compare output; also an LPM4.5 wake-up source.
27 P2.2/TA1.2 bidirectional General-purpose digital I/O with Timer TA1 CCR2 capture/compare output; also an LPM4.5 wake-up source.
28 P2.3/VMONIN bidirectional General-purpose digital I/O that doubles as the voltage monitor input VMONIN when VMONLVLx is set to 111b.
29 P2.4/TA1.0 bidirectional General-purpose digital I/O with Timer TA1 CCR0 capture input B and compare output; available only on the 32-pin RHB package.
30 P2.5/TA0.0 bidirectional General-purpose digital I/O with Timer TA0 CCR0 capture input B and compare output; available only on the 32-pin RHB package.
31 P2.6/TA0.1 bidirectional General-purpose digital I/O with Timer TA0 CCR1 compare output; available only on the 32-pin RHB package.
32 P2.7/TA0.2 bidirectional General-purpose digital I/O with Timer TA0 CCR2 compare output; available only on the 32-pin RHB package.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32-EP(5x5)
Category Single Chip Microcomputer/Microcontroller
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage applied at VCC VCC -0.3 4.1 V 13
Voltage applied to pins -0.3 V All pins except VCORE, ROSC and SD24 input pins; max printed as VCC + 0.3 V 13
Diode current at pins -2 2 mA All pins except SD24 input pins 13
Diode current at SD24 input pins 2 mA A0.0+, A0.0-, A1.0+, A1.0-, A2.0+, A2.0-, A3.0+, A3.0- 13
Maximum junction temperature TJ,MAX 115 °C 13
Storage temperature Tstg -55 150 °C 13
Supply voltage during program execution and flash programming or erase VCC 2.2 3.6 V VCC = VCC 13
Operating free-air temperature TA -40 105 °C T temperature range 13
Operating junction temperature TJ -40 105 °C T temperature range 13
Processor frequency (maximum MCLK frequency) fSYSTEM 0 16.384 MHz 13
Frequency in DCO bypass mode fDCOBYP 0 16.384 MHz 17
DCO absolute tolerance, external resistor mode, calibrated -0.25 0.25 % VCC = 3 V, TA = 25°C; recommended ROSC resistor 20 kΩ, 0.1%, ±50 ppm/°C 16
DCO frequency temperature drift, external resistor mode dfDCO/dT -20 20 ppm/°C 16
DCO frequency supply voltage drift, external resistor mode dfDCO/dVCC 200 600 ppm/V 16
DCO absolute tolerance, internal resistor mode, calibrated -0.9 0.9 % VCC = 3 V, TA = 25°C 16
DCO frequency temperature drift, internal resistor mode dfDCO/dT -200 200 ppm/°C 16
DCO frequency supply voltage drift, internal resistor mode dfDCO/dVCC 200 600 ppm/V 16
Wake-up time from LPM3 to active mode tWAKE-UP-LPM3 1 µs MCLK = SMCLK = 1.024 MHz 17
Wake-up time from LPM4 to active mode tWAKE-UP-LPM4 45 µs MCLK = SMCLK = 1.024 MHz 17
Wake-up time from LPM4.5 to active mode upon I/O event tWAKE-UP-LPM4.5-IO 0.45 ms CVCORE = 470 nF; time to reset vector execution 17
Wake-up time from LPM4.5 to active mode upon external reset tWAKE-UP-LPM4.5-RESET 0.45 ms CVCORE = 470 nF; external reset (RST); time to reset vector execution 17
Pulse duration required at the RST/NMI pin to accept a reset tRESET 4 µs 16
Positive-going input threshold voltage VIT+ 1.5 2.1 V VCC = 3 V 18
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 18
Input voltage hysteresis (VIT+, VIT-) Vhys 0.4 1.1 V VCC = 3 V 18
External interrupt trigger pulse duration to set interrupt flag t(int) 20 ns VCC = 3 V; Port P1, P2: P1.x to P2.x 18
High-impedance leakage current Ilkg(Py.x) -50 50 nA VCC = 3 V 18
Supply voltage range (voltage reference) VCC 2.2 3.6 V 21
Bandgap output voltage calibrated VBG 1.146 1.158 1.17 V VCC = 3 V 21
Bandgap reference temperature coefficient dVBG/dT 10 50 ppm/°C VCC = 3 V 21
Temperature sensor output voltage Vsensor 610 650 690 mV VCC = 3 V, TA = 30°C 21
Temperature sensor output voltage Vsensor 765 805 845 mV VCC = 3 V, TA = 105°C 21
Temperature coefficient of sensor TCsensor 1.96 2.07 2.17 mV/°C 21
SD24 supply voltage range VCC 2.2 3.6 V AVSS = DVSS = 0 V 22
SD24 internal reference voltage VSD24REF 1.146 1.158 1.17 V SD24REFS = 1; VCC = 3 V 22
External reference input voltage range VREF(I) 1 1.2 1.5 V SD24REFS = 0; VCC = 3 V 22
Differential input voltage range for specified performance VID -928 928 mV SD24REFS = 1; SD24GAINx = 1 22
Differential input voltage range for specified performance VID -58 58 mV SD24REFS = 1; SD24GAINx = 16 22
Integral nonlinearity, end-point fit INL -0.003 0.003 % FSR SD24REFS = 1; SD24GAINx: 1, 8, 16; VCC = 3 V 23
Gain error EG -2 2 % SD24REFS = 1; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V 23
Integral nonlinearity, end-point fit INL -0.003 0.003 % FSR SD24REFS = 0; SD24GAINx: 1, 8, 16; VCC = 3 V; external reference 1.2 V 24
Gain error EG -1 1 % SD24REFS = 0; SD24GAINx: 1, 2, 4, 8, 16; VCC = 3 V; external reference 1.2 V 24
UART receive deglitch time tt 8 15 20 ns UCGLITx = 0; VCC = 2.2 V, 3 V 26
UART receive deglitch time tt 30 50 60 ns UCGLITx = 1; VCC = 2.2 V, 3 V 26
STE lead time, STE active to clock tSTE,LEAD 150 ns UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V 26
STE lag time, last clock to STE inactive tSTE,LAG 200 ns UCSTEM = 1, UCMODEx = 01 or 10; VCC = 2.2 V, 3 V 26
STE access time, STE active to SIMO data out tSTE,ACC 40 ns UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V 26
STE access time, STE active to SIMO data out tSTE,ACC 30 ns UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V 26
STE disable time, STE inactive to SIMO high impedance tSTE,DIS 40 ns UCSTEM = 0, UCMODEx = 01 or 10; VCC = 2.2 V 26
STE disable time, STE inactive to SIMO high impedance tSTE,DIS 30 ns UCSTEM = 0, UCMODEx = 01 or 10; VCC = 3 V 26
SOMI input data setup time tSU,MI 50 ns VCC = 2.2 V 26
SOMI input data setup time tSU,MI 30 ns VCC = 3 V 26
SIMO output data valid time tVALID,MO 7 ns UCLK edge to SIMO valid, CL = 20 pF; VCC = 2.2 V 26
SIMO output data valid time tVALID,MO 5 ns UCLK edge to SIMO valid, CL = 20 pF; VCC = 3 V 26
Junction-to-ambient thermal resistance, still air RθJA 35.9 °C/W QFN-32 (RHB) package, JEDEC 2S2P, still air 15
Junction-to-case (top) thermal resistance RθJC(TOP) 25.5 °C/W QFN-32 (RHB) package 15
Junction-to-board thermal resistance RθJB 8.6 °C/W QFN-32 (RHB) package 15
Junction-to-board thermal characterization parameter ΨJB 8.6 °C/W QFN-32 (RHB) package 15
Junction-to-top thermal characterization parameter ΨJT 0.3 °C/W QFN-32 (RHB) package 15
Junction-to-case (bottom) thermal resistance RθJC(BOTTOM) 1.4 °C/W QFN-32 (RHB) package 15

CAD (KiCad official)

  • Symbol: MSP430I2021TRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: msp430i2021trhbr-etched.step / msp430i2021trhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430i2021trhbr.step / msp430i2021trhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (81 pp, sha256 546ca9145d8b8883, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF