component
MSP430G2513IRHB32R
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375
{
"schema_version": 1,
"type": "component",
"slug": "msp430g2513irhb32r",
"title": "MSP430G2513IRHB32R",
"brief": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"msp430g2513irhb32r",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "MSP430G2513IRHB32R",
"manufacturer": "Texas Instruments",
"package": "VQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://www.ti.com/cn/lit/gpn/msp430g2353",
"parts": {
"symbol": "msp430g2513irhb32r.kicad_sym",
"footprint": "msp430g2513irhb32r.kicad_mod",
"model_3d": "msp430g2513irhb32r-hero.glb",
"model_3d_plain": "msp430g2513irhb32r.glb",
"model_3d_step": "msp430g2513irhb32r-etched.step",
"model_3d_step_plain": "msp430g2513irhb32r.step",
"lbr": "msp430g2513irhb32r.lbr"
},
"distributor_links": {
"lcsc": "C1847982",
"digikey": "296-MSP430G2513IRHB32RTR-ND",
"mouser": "595-P430G2513IRHB32R"
},
"distributor_check": {
"checked_at": "2026-10-11T03:49:36Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-MSP430G2513IRHB32RTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-P430G2513IRHB32R",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "P1.1",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.0 capture/compare, USCI_A0 UART receive or SPI slave-out, and BSL data-transmit functions; the A1/CA1 analog functions are not available on G2x13 devices."
},
{
"number": "2",
"name": "P1.2",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.1 capture/compare, USCI_A0 UART transmit or SPI slave-in/master-out; the A2/CA2 analog functions are not available on G2x13 devices."
},
{
"number": "3",
"name": "P1.3",
"type": "bidirectional",
"description": "General-purpose digital I/O that can also serve as CAOUT, and ADC10 clock/reference functions exist only on MSP430G2x53 devices."
},
{
"number": "4",
"name": "P1.4",
"type": "bidirectional",
"description": "General-purpose digital I/O with SMCLK output, USCI_B0 STE, USCI_A0 CLK, and JTAG TCK input used for device programming and test."
},
{
"number": "5",
"name": "P1.5",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.0 output, USCI_B0/USCI_A0 clock or STE functions, JTAG TMS input, and BSL data-receive function."
},
{
"number": "6",
"name": "P3.1",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A TA1.0 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "7",
"name": "P3.0",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.2 capture/compare; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "Not connected internally."
},
{
"number": "9",
"name": "P2.0",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI0A and output Out0, with interrupt capability."
},
{
"number": "10",
"name": "P2.1",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI1A and output Out1, with interrupt capability."
},
{
"number": "11",
"name": "P2.2",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI1B and output Out1, with interrupt capability."
},
{
"number": "12",
"name": "P3.2",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A TA1.1 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "13",
"name": "P3.3",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A TA1.2 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "14",
"name": "P3.4",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.0 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "15",
"name": "P2.3",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI0B and output Out0, with interrupt capability."
},
{
"number": "16",
"name": "P2.4",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI2A and output Out2, with interrupt capability."
},
{
"number": "17",
"name": "P2.5",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A capture input CCI2B and output Out2, with interrupt capability."
},
{
"number": "18",
"name": "P3.5",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.1 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "19",
"name": "P3.6",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.2 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
},
{
"number": "20",
"name": "P3.7",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer1_A TACLK input, and comparator output CAOUT."
},
{
"number": "21",
"name": "P1.6",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TA0.1 output, USCI_B0 SPI slave-out or I2C SCL, and JTAG TDI/TCLK input during programming and test."
},
{
"number": "22",
"name": "P1.7",
"type": "bidirectional",
"description": "General-purpose digital I/O with comparator output CAOUT, USCI_B0 SPI slave-in or I2C SDA, and JTAG TDO/TDI data during programming and test."
},
{
"number": "23",
"name": "RST/NMI/SBWTDIO",
"type": "input",
"description": "Device reset input (active-low reset mode) or non-maskable interrupt input, and Spy-Bi-Wire test data input/output during programming and test."
},
{
"number": "24",
"name": "TEST/SBWTCK",
"type": "input",
"description": "Selects test mode for the JTAG pins on Port 1; the device protection fuse is connected to TEST, and it carries the Spy-Bi-Wire test clock input during programming and test."
},
{
"number": "25",
"name": "XOUT/P2.7",
"type": "bidirectional",
"description": "Crystal oscillator output terminal or general-purpose digital I/O; if used as an input, excessive current flows until P2SEL.7 is cleared because the oscillator output driver is connected to the pad after reset."
},
{
"number": "26",
"name": "XIN/P2.6/TA0.1",
"type": "bidirectional",
"description": "Crystal oscillator input terminal, or general-purpose digital I/O with Timer0_A TA0.1 output."
},
{
"number": "27",
"name": "AVSS",
"type": "power_in",
"description": "Analog ground reference pin, as shown in the RHB32 pinout figure; Table 2 lists pin 27 together with DVSS."
},
{
"number": "28",
"name": "DVSS",
"type": "power_in",
"description": "Digital ground reference (VSS = 0 V)."
},
{
"number": "29",
"name": "AVCC",
"type": "power_in",
"description": "Analog supply voltage pin on the RHB package; the datasheet gives an analog supply range of 2.2 V to 3.6 V (VSS = 0 V) for the ADC10, which is available only on MSP430G2x53 devices."
},
{
"number": "30",
"name": "DVCC",
"type": "power_in",
"description": "Digital supply voltage; the datasheet specifies VCC of 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash programming or erase."
},
{
"number": "31",
"name": "P1.0",
"type": "bidirectional",
"description": "General-purpose digital I/O with Timer0_A TACLK input and ACLK output; the A0/CA0 analog inputs are not available on G2x13 devices."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "Not connected internally."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 2 lists DVSS at RHB32 pins 27 and 28, but the RHB32 top-view figure (page 5) labels pin 27 as ; The MSP430G2513 row in Table 1 shows ADC10 channels as '-', so the ADC10 analog functions (AVCC/ADC ; Table 2 types RST/NMI/SBWTDIO as input ('I') although the pin carries bidirectional Spy-Bi-Wire data",
"exposed pad 33 added from the footprint",
"2/33 pins cited to the wrong page (name found elsewhere): ['29:AVCC@p38', '30:DVCC@p22']"
],
"pages_sent": 64,
"cost_usd": 0.3365,
"at": "2026-10-11T03:49:15"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/msp430g2353",
"pages": 88,
"sha256": "d071b267aa847e08",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "msp430g2513irhb32r.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "msp430g2513irhb32r-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c67dd9e2b42e88b80efd65e776160e01fd661c170f85e666620a9487bc134698",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VQFN-32-EP(5x5)",
"Category": "Single Chip Microcomputer/Microcontroller",
"Pins": "33"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"msp430g2513irhb32r"
],
"discovery_pitch": "MSP430G2513IRHB32R (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"msp430g2513irhb32r.kicad_sym",
"msp430g2513irhb32r.kicad_mod",
"msp430g2513irhb32r.glb",
"msp430g2513irhb32r.step",
"msp430g2513irhb32r.lbr",
"docs/hero.png",
"docs/msp430g2513irhb32r-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"msp430g2513irhb32r-hero.glb",
"msp430g2513irhb32r-hero.overlay.json"
],
"visibility": {
"public": true
}
}