MSP430G2513IRHB32R

{
  "slug": "msp430g2513irhb32r",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "msp430g2513irhb32r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "msp430g2513irhb32r.kicad_sym",
    "msp430g2513irhb32r.kicad_mod",
    "msp430g2513irhb32r.glb",
    "msp430g2513irhb32r.step",
    "msp430g2513irhb32r.lbr",
    "docs/hero.png",
    "docs/msp430g2513irhb32r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "msp430g2513irhb32r-hero.glb",
    "msp430g2513irhb32r-hero.overlay.json"
  ],
  "component": {
    "mpn": "MSP430G2513IRHB32R",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430g2353",
    "parts": {
      "symbol": "msp430g2513irhb32r.kicad_sym",
      "footprint": "msp430g2513irhb32r.kicad_mod",
      "model_3d": "msp430g2513irhb32r-hero.glb",
      "model_3d_plain": "msp430g2513irhb32r.glb",
      "model_3d_step": "msp430g2513irhb32r-etched.step",
      "model_3d_step_plain": "msp430g2513irhb32r.step",
      "lbr": "msp430g2513irhb32r.lbr"
    },
    "distributor_links": {
      "lcsc": "C1847982",
      "digikey": "296-MSP430G2513IRHB32RTR-ND",
      "mouser": "595-P430G2513IRHB32R"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T03:49:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-MSP430G2513IRHB32RTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-P430G2513IRHB32R",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "P1.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.0 capture/compare, USCI_A0 UART receive or SPI slave-out, and BSL data-transmit functions; the A1/CA1 analog functions are not available on G2x13 devices."
      },
      {
        "number": "2",
        "name": "P1.2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.1 capture/compare, USCI_A0 UART transmit or SPI slave-in/master-out; the A2/CA2 analog functions are not available on G2x13 devices."
      },
      {
        "number": "3",
        "name": "P1.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also serve as CAOUT, and ADC10 clock/reference functions exist only on MSP430G2x53 devices."
      },
      {
        "number": "4",
        "name": "P1.4",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with SMCLK output, USCI_B0 STE, USCI_A0 CLK, and JTAG TCK input used for device programming and test."
      },
      {
        "number": "5",
        "name": "P1.5",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.0 output, USCI_B0/USCI_A0 clock or STE functions, JTAG TMS input, and BSL data-receive function."
      },
      {
        "number": "6",
        "name": "P3.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A TA1.0 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "7",
        "name": "P3.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.2 capture/compare; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally."
      },
      {
        "number": "9",
        "name": "P2.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI0A and output Out0, with interrupt capability."
      },
      {
        "number": "10",
        "name": "P2.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI1A and output Out1, with interrupt capability."
      },
      {
        "number": "11",
        "name": "P2.2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI1B and output Out1, with interrupt capability."
      },
      {
        "number": "12",
        "name": "P3.2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A TA1.1 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "13",
        "name": "P3.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A TA1.2 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "14",
        "name": "P3.4",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.0 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "15",
        "name": "P2.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI0B and output Out0, with interrupt capability."
      },
      {
        "number": "16",
        "name": "P2.4",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI2A and output Out2, with interrupt capability."
      },
      {
        "number": "17",
        "name": "P2.5",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A capture input CCI2B and output Out2, with interrupt capability."
      },
      {
        "number": "18",
        "name": "P3.5",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.1 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "19",
        "name": "P3.6",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.2 output; port P3 pull-down resistors must be enabled by setting P3REN.x = 1."
      },
      {
        "number": "20",
        "name": "P3.7",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer1_A TACLK input, and comparator output CAOUT."
      },
      {
        "number": "21",
        "name": "P1.6",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TA0.1 output, USCI_B0 SPI slave-out or I2C SCL, and JTAG TDI/TCLK input during programming and test."
      },
      {
        "number": "22",
        "name": "P1.7",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with comparator output CAOUT, USCI_B0 SPI slave-in or I2C SDA, and JTAG TDO/TDI data during programming and test."
      },
      {
        "number": "23",
        "name": "RST/NMI/SBWTDIO",
        "type": "input",
        "description": "Device reset input (active-low reset mode) or non-maskable interrupt input, and Spy-Bi-Wire test data input/output during programming and test."
      },
      {
        "number": "24",
        "name": "TEST/SBWTCK",
        "type": "input",
        "description": "Selects test mode for the JTAG pins on Port 1; the device protection fuse is connected to TEST, and it carries the Spy-Bi-Wire test clock input during programming and test."
      },
      {
        "number": "25",
        "name": "XOUT/P2.7",
        "type": "bidirectional",
        "description": "Crystal oscillator output terminal or general-purpose digital I/O; if used as an input, excessive current flows until P2SEL.7 is cleared because the oscillator output driver is connected to the pad after reset."
      },
      {
        "number": "26",
        "name": "XIN/P2.6/TA0.1",
        "type": "bidirectional",
        "description": "Crystal oscillator input terminal, or general-purpose digital I/O with Timer0_A TA0.1 output."
      },
      {
        "number": "27",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground reference pin, as shown in the RHB32 pinout figure; Table 2 lists pin 27 together with DVSS."
      },
      {
        "number": "28",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground reference (VSS = 0 V)."
      },
      {
        "number": "29",
        "name": "AVCC",
        "type": "power_in",
        "description": "Analog supply voltage pin on the RHB package; the datasheet gives an analog supply range of 2.2 V to 3.6 V (VSS = 0 V) for the ADC10, which is available only on MSP430G2x53 devices."
      },
      {
        "number": "30",
        "name": "DVCC",
        "type": "power_in",
        "description": "Digital supply voltage; the datasheet specifies VCC of 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash programming or erase."
      },
      {
        "number": "31",
        "name": "P1.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with Timer0_A TACLK input and ACLK output; the A0/CA0 analog inputs are not available on G2x13 devices."
      },
      {
        "number": "32",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 2 lists DVSS at RHB32 pins 27 and 28, but the RHB32 top-view figure (page 5) labels pin 27 as ; The MSP430G2513 row in Table 1 shows ADC10 channels as '-', so the ADC10 analog functions (AVCC/ADC ; Table 2 types RST/NMI/SBWTDIO as input ('I') although the pin carries bidirectional Spy-Bi-Wire data",
          "exposed pad 33 added from the footprint",
          "2/33 pins cited to the wrong page (name found elsewhere): ['29:AVCC@p38', '30:DVCC@p22']"
        ],
        "pages_sent": 64,
        "cost_usd": 0.3365,
        "at": "2026-10-11T03:49:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/msp430g2353",
        "pages": 88,
        "sha256": "d071b267aa847e08",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "msp430g2513irhb32r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "msp430g2513irhb32r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c67dd9e2b42e88b80efd65e776160e01fd661c170f85e666620a9487bc134698",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}