main
Ray Publish 0.1.0 93e3839
{
  "slug": "msp430g2302ipw20r",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "msp430g2302ipw20r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "msp430g2302ipw20r.kicad_sym",
    "msp430g2302ipw20r.kicad_mod",
    "msp430g2302ipw20r.glb",
    "msp430g2302ipw20r.step",
    "msp430g2302ipw20r.lbr",
    "docs/hero.png",
    "docs/msp430g2302ipw20r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "msp430g2302ipw20r-hero.glb",
    "msp430g2302ipw20r-hero.overlay.json",
    "msp430g2302ipw20r-etched.glb"
  ],
  "component": {
    "mpn": "MSP430G2302IPW20R",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/msp430g2302.pdf",
    "parts": {
      "symbol": "msp430g2302ipw20r.kicad_sym",
      "footprint": "msp430g2302ipw20r.kicad_mod",
      "model_3d": "msp430g2302ipw20r-hero.glb",
      "model_3d_plain": "msp430g2302ipw20r-etched.glb",
      "model_3d_step": "msp430g2302ipw20r-etched.step",
      "model_3d_step_plain": "msp430g2302ipw20r.step",
      "lbr": "msp430g2302ipw20r.lbr"
    },
    "distributor_links": {
      "lcsc": "C2863202",
      "mouser": "595-SP430G2302IPW20R"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:10:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 882 calls left today"
      },
      "mouser": {
        "pn": "595-SP430G2302IPW20R",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DVCC",
        "type": "power_in",
        "description": "Supply voltage, 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash programming/erase."
      },
      {
        "number": "2",
        "name": "P1.0/TA0CLK/ACLK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be the Timer0_A clock input TACLK or the ACLK signal output."
      },
      {
        "number": "3",
        "name": "P1.1/TA0.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be Timer0_A capture CCI0A input or compare Out0 output."
      },
      {
        "number": "4",
        "name": "P1.2/TA0.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be Timer0_A capture CCI1A input or compare Out1 output."
      },
      {
        "number": "5",
        "name": "P1.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin (the ADC10 functions on this pin are available only on MSP430G2x32, not on this device)."
      },
      {
        "number": "6",
        "name": "P1.4/TA0.2/SMCLK/TCK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be Timer0_A CCI2A input or Out2 output, the SMCLK signal output, or the JTAG test clock TCK for programming and test."
      },
      {
        "number": "7",
        "name": "P1.5/TA0.0/SCLK/TMS",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be Timer0_A Out0 output, the USI clock (input in I2C mode, in/output in SPI mode), or JTAG test mode select TMS."
      },
      {
        "number": "8",
        "name": "P2.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.0 = 1."
      },
      {
        "number": "9",
        "name": "P2.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.1 = 1."
      },
      {
        "number": "10",
        "name": "P2.2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.2 = 1."
      },
      {
        "number": "11",
        "name": "P2.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.3 = 1."
      },
      {
        "number": "12",
        "name": "P2.4",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.4 = 1."
      },
      {
        "number": "13",
        "name": "P2.5",
        "type": "bidirectional",
        "description": "General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.5 = 1."
      },
      {
        "number": "14",
        "name": "P1.6/TA0.1/SDO/SCL/TDI/TCLK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be Timer0_A Out1 output, USI SPI data output (SDO) or I2C clock (SCL), or JTAG test data input / test clock input TDI/TCLK."
      },
      {
        "number": "15",
        "name": "P1.7/SDI/SDA/TDO/TDI",
        "type": "bidirectional",
        "description": "General-purpose digital I/O that can also be USI SPI data input (SDI) or I2C data (SDA), or JTAG test data output / test data input TDO/TDI."
      },
      {
        "number": "16",
        "name": "RST/NMI/SBWTDIO",
        "type": "input",
        "description": "Reset input, nonmaskable interrupt input, and Spy-Bi-Wire test data input/output during programming and test."
      },
      {
        "number": "17",
        "name": "TEST/SBWTCK",
        "type": "input",
        "description": "Selects test mode for the JTAG pins on Port 1 and is the Spy-Bi-Wire test clock input; the device protection fuse is connected to TEST."
      },
      {
        "number": "18",
        "name": "XOUT/P2.7",
        "type": "bidirectional",
        "description": "Crystal oscillator output terminal or general-purpose digital I/O; if used as an input, excess current flows until P2SEL.7 is cleared."
      },
      {
        "number": "19",
        "name": "XIN/P2.6/TA0.1",
        "type": "bidirectional",
        "description": "Crystal oscillator input terminal, general-purpose digital I/O, or Timer0_A Out1 output."
      },
      {
        "number": "20",
        "name": "DVSS",
        "type": "power_in",
        "description": "Ground reference."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet states that ADC10 pin functions (A0-A7, VREF+/VEREF+, VREF-/VEREF-, ADC10CLK) are avai; Table 1 lists USI as '-' for the G2x02 rows, including MSP430G2302, while the family features text l; No AVCC or AVSS terminal exists on the TSSOP-20 (PW20) package; those are RSA16-only. The only suppl"
        ],
        "pages_sent": 77,
        "cost_usd": 0.3362,
        "at": "2026-11-10T10:10:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/msp430g2302.pdf",
        "pages": 77,
        "sha256": "2f7249bd97fe2885",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "msp430g2302ipw20r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "msp430g2302ipw20r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d8352a228706779458dcc872c972a2b4a5e90947f1de86ad4dba88931c9811c3",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PW0020A (TSSOP PW, 20 pins)",
      "source_page": 74,
      "D": {
        "nom_mm": 6.5,
        "range_mm": [
          6.4,
          6.6
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "msp430g2302ipw20r.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}