main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers msp430g2302ipw20r: viewers rendered from the public page · Ray
msp430g2302ipw20r-etched.glb Publish 0.1.0 · Ray
msp430g2302ipw20r-etched.step msp430g2302ipw20r: factory component page (tier=mfr) · Ray
msp430g2302ipw20r-hero.glb msp430g2302ipw20r: hero GLB from the etched model (keeps the MPN mark) · Ray
msp430g2302ipw20r-hero.overlay.json Publish 0.1.0 · Ray
msp430g2302ipw20r.glb Publish 0.1.0 · Ray
msp430g2302ipw20r.kicad_mod Publish 0.1.0 · Ray
msp430g2302ipw20r.kicad_sym Publish 0.1.0 · Ray
msp430g2302ipw20r.lbr Publish 0.1.0 · Ray
msp430g2302ipw20r.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 20 pins · Ray

MSP430G2302IPW20R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

MSP430G2302IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Supply voltage, 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash programming/erase.
2 P1.0/TA0CLK/ACLK bidirectional General-purpose digital I/O that can also be the Timer0_A clock input TACLK or the ACLK signal output.
3 P1.1/TA0.0 bidirectional General-purpose digital I/O that can also be Timer0_A capture CCI0A input or compare Out0 output.
4 P1.2/TA0.1 bidirectional General-purpose digital I/O that can also be Timer0_A capture CCI1A input or compare Out1 output.
5 P1.3 bidirectional General-purpose digital I/O pin (the ADC10 functions on this pin are available only on MSP430G2x32, not on this device).
6 P1.4/TA0.2/SMCLK/TCK bidirectional General-purpose digital I/O that can also be Timer0_A CCI2A input or Out2 output, the SMCLK signal output, or the JTAG test clock TCK for programming and test.
7 P1.5/TA0.0/SCLK/TMS bidirectional General-purpose digital I/O that can also be Timer0_A Out0 output, the USI clock (input in I2C mode, in/output in SPI mode), or JTAG test mode select TMS.
8 P2.0 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.0 = 1.
9 P2.1 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.1 = 1.
10 P2.2 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.2 = 1.
11 P2.3 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.3 = 1.
12 P2.4 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.4 = 1.
13 P2.5 bidirectional General-purpose digital I/O pin; its pulldown resistor should be enabled by setting P2REN.5 = 1.
14 P1.6/TA0.1/SDO/SCL/TDI/TCLK bidirectional General-purpose digital I/O that can also be Timer0_A Out1 output, USI SPI data output (SDO) or I2C clock (SCL), or JTAG test data input / test clock input TDI/TCLK.
15 P1.7/SDI/SDA/TDO/TDI bidirectional General-purpose digital I/O that can also be USI SPI data input (SDI) or I2C data (SDA), or JTAG test data output / test data input TDO/TDI.
16 RST/NMI/SBWTDIO input Reset input, nonmaskable interrupt input, and Spy-Bi-Wire test data input/output during programming and test.
17 TEST/SBWTCK input Selects test mode for the JTAG pins on Port 1 and is the Spy-Bi-Wire test clock input; the device protection fuse is connected to TEST.
18 XOUT/P2.7 bidirectional Crystal oscillator output terminal or general-purpose digital I/O; if used as an input, excess current flows until P2SEL.7 is cleared.
19 XIN/P2.6/TA0.1 bidirectional Crystal oscillator input terminal, general-purpose digital I/O, or Timer0_A Out1 output.
20 DVSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS -0.3 4.1 V 17
Voltage applied to any pin (referenced to VSS) -0.3 V Printed max is VCC + 0.3 V 17
Diode current at any device pin -2 2 mA 17
Storage temperature range Tstg -55 150 °C Unprogrammed device 17
Supply voltage VCC 1.8 3.6 V During program execution 17
Supply voltage VCC 2.2 3.6 V During flash programming/erase 17
Operating free-air temperature TA -40 85 °C 17
Processor frequency (maximum MCLK frequency) fSYSTEM 6 MHz VCC = 1.8 V, duty cycle 50% ± 10% 17
Processor frequency (maximum MCLK frequency) fSYSTEM 12 MHz VCC = 2.7 V, duty cycle 50% ± 10% 17
Processor frequency (maximum MCLK frequency) fSYSTEM 16 MHz VCC = 3.3 V, duty cycle 50% ± 10% 17
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3 V 20
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 20
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 1 V VCC = 3 V 20
Pullup/pulldown resistor RPull 20 35 50 kΩ VCC = 3 V; for pullup VIN = VSS, for pulldown VIN = VCC 20
High-impedance leakage current Ilkg(Px.x) -50 50 nA VCC = 3 V 20
RSELx supply voltage range VCC 1.8 3.6 V RSELx < 14 25
RSELx supply voltage range VCC 2.2 3.6 V RSELx = 14 25
RSELx supply voltage range VCC 3 3.6 V RSELx = 15 25
1-MHz tolerance over temperature (calibrated at 30°C and 3 V) -3 0.5 3 % BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, 0°C to 85°C, VCC = 3 V 26
1-MHz tolerance over VCC (calibrated at 30°C and 3 V) -3 2 3 % BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, 30°C, VCC 1.8 V to 3.6 V 26
1-MHz tolerance overall (calibrated at 30°C and 3 V) -6 3 6 % BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, -40°C to 85°C, VCC 1.8 V to 3.6 V 26
8-MHz tolerance over temperature (calibrated at 30°C and 3 V) -3 0.5 3 % BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, 0°C to 85°C, VCC = 3 V 26
8-MHz tolerance over VCC (calibrated at 30°C and 3 V) -3 2 3 % BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, 30°C, VCC 2.2 V to 3.6 V 26
8-MHz tolerance overall (calibrated at 30°C and 3 V) -6 3 6 % BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, -40°C to 85°C, VCC 2.2 V to 3.6 V 26
12-MHz tolerance over temperature (calibrated at 30°C and 3 V) -3 0.5 3 % BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, 0°C to 85°C, VCC = 3 V 26
12-MHz tolerance over VCC (calibrated at 30°C and 3 V) -3 2 3 % BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, 30°C, VCC 2.7 V to 3.6 V 26
12-MHz tolerance overall (calibrated at 30°C and 3 V) -6 3 6 % BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, -40°C to 85°C, VCC 2.7 V to 3.6 V 26
16-MHz tolerance over temperature (calibrated at 30°C and 3 V) -3 0.5 3 % BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, 0°C to 85°C, VCC = 3.3 V 26
16-MHz tolerance over VCC (calibrated at 30°C and 3 V) -3 2 3 % BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, 30°C, VCC 3.3 V to 3.6 V 26
16-MHz tolerance overall (calibrated at 30°C and 3 V) -6 3 6 % BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, -40°C to 85°C, VCC 3.3 V to 3.6 V 26
LFXT1 oscillator logic level square wave input frequency, LF mode fLFXT1,LF,logic 10000 32768 50000 Hz XTS = 0, XCAPx = 0, LFXT1Sx = 3, VCC 1.8 V to 3.6 V 28
Duty cycle, LF mode 30 50 70 % XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, VCC = 2.2 V 28
Oscillator fault frequency, LF mode fFault,LF 10 10000 Hz XTS = 0, XCAPx = 0, LFXT1Sx = 3, VCC = 2.2 V 28
VLO frequency fVLO 4 12 20 kHz -40°C to 85°C, VCC = 3 V 28

CAD (KiCad official)

  • Symbol: MSP430G2302IPW20R
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: msp430g2302ipw20r-etched.step / msp430g2302ipw20r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2302ipw20r.step / msp430g2302ipw20r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (77 pp, sha256 2f7249bd97fe2885, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF